Zhejiang Bangye Automation (Bangye) — Pneumatic Cylinders, Actuators & Presses
ISO/JIS pneumatic cylinders, ATY/AT rotary actuators, EY rod-type electric actuators, DZ/SZ pneumatic presses, cylinder kits, and precision OEM aluminum assemblies from Zhejiang Bangye Automation (formerly Shanghai Bangye).
ISO & JIS Pneumatic Cylinders
Zhejiang Bangye Automation manufactures ISO 15552 tie-rod DNG and profile DNC pneumatic cylinders alongside ISO 21287 compact ADN and ISO 6430 NSC series. The lineup covers ISO 6432 MI/MIC and MF/MFC round units, MAL, SDA, CQ, plus JIS MB and CA2 models.
- ISO 15552 DNG tie-rod and DNC profile
- ISO 21287 ADN and ISO 6430 NSC series
- ISO 6432 stainless MI/MIC, MF/MFC, MAL
- Compact SDA, CQ and JIS MB, CA2 cylinders
ISO & JIS Cylinder Kits
Bangye cylinder kits support ISO 15552 DNG and DNC cylinders, ISO 6430 NSC units, and JIS CA2 and MB tie-rod series. Each kit pairs end caps, barrel, piston, rod, and seals to match the required stroke. Replacing internal wear parts restores air tightness.
- ISO 15552 cylinder kits: DNG and DNC
- JIS standard cylinder kits: CA2 and MB
- ISO 6430 cylinder kits: NSC series
- End caps, barrels, pistons, rods and seals
ISO 15552 & ISO 6432 Mounting Accessories
ISO 15552 hardware for 32–320 mm bores covers DNG hinges, MP2 clevises, feet, steel MF1/MF2 flanges, and 32–125 mm aluminum flanges. Articulated heads (32–200 mm) prevent rod side-load binding. ISO 6432 kits fit 8–25 mm bores with trunnions and brackets.
- ISO 15552 DNG hinges, MP2 & feet: 32–320 mm
- MF1/MF2 steel flanges 32–320, aluminum 32–125
- Articulated head hinges: 32–200 mm
- ISO 6432 trunnions, pedestals & flanges: 8–25 mm
ATY & AT Pneumatic Actuators
Zhejiang Bangye Automation builds ATY rotary pneumatic actuators (ATY52–ATY63) in pressure-formed aluminum and AT series in extruded aluminum. The ATY housing receives internal and external corrosion protection. Honed cylinder bores reduce friction and seal wear.
- ATY series sizes: ATY52–ATY63
- Pressure-formed aluminum housing, anti-corrosion
- Honed cylinder bore for low friction
- AT series extruded aluminum actuator body
EY Series Electric Rod Actuators
EY rod-type electric actuators span 20–100 mm bores matching ISO 21287 (20–25 mm) and ISO 15552 / VDMA 24 562 (32–100 mm) mounts. Built from 6061-T6 aluminum profile, units allow direct or turn-back drives. EY 20–100 joints, bases, plates, and pistons are supported.
- Bore sizes: 20, 25, 32, 40, 50, 63, 80, 100 mm
- ISO 21287 (20–25) & ISO 15552 (32–100) mounts
- 6061-T6 aluminum profile, anodized & painted
- EY 20–100 rod joints, bases, plates & pistons
DZ / SZ Pneumatic Presses & OEM Manufacturing
Bangye pneumatic presses cover single-column DZ (DZ80–DZ550) and four-column SZ (SZ220–SZ1500) series with adjustable stroke and air pressure. The Pinghu plant executes over 90% of OEM alloy forming, CNC machining, and CMM/X-ray inspection in-house.
- DZ single-column: DZ80, DZ140, DZ220/W, DZ350, DZ550
- SZ four-column: SZ220, SZ350, SZ550/W, SZ900, SZ1500
- Adjustable stroke, descent speed and air pressure
- >90% in-house tooling, CNC, CMM & X-ray QC lab
Pinghu Manufacturing & Quality Laboratory Capabilities
Operating from Pinghu, Jiaxing (Zhejiang Province) since relocating from Shanghai in 2020, Zhejiang Bangye Automation (Bangye) executes over 90% of its manufacturing steps in-house, spanning mold tooling, aluminum and zinc alloy forming, precision CNC machining, surface anodizing, and final pneumatic assembly.
Quality assurance runs under ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and IATF 16949 management systems.
The inspection laboratory uses X-ray flaw detection, coordinate measuring machines, Mitutoyo C3200 contour measurement, Bruker Q2ION elemental spectrometers, tensile testers, and salt-spray chambers.
ISO/JIS Interchangeability Across Pneumatic, Electric & Press Lines
Standard cylinders align with ISO 15552 (DNG, DNC), ISO 21287 (ADN), ISO 6430 (NSC), ISO 6432 (MI/MIC, MF/MFC), and JIS (MB, CA2), paired with matched kits and 8–320 mm mounting brackets, MP2 female hinges, spherical articulated heads, and MF1/MF2 flanges.
EY series rod-type electric actuators (20–100 mm) share ISO 21287 and ISO 15552 mounting footprints in 6061-T6 aluminum profiles with direct or turn-back drive layouts.
For rotary valve duty, ATY52–ATY63 and AT aluminum actuators pair honed bores with corrosion protection, while DZ and SZ pneumatic presses cover 80–1500 class assembly work.
Zhejiang Bangye Automation and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Zhejiang Bangye Automation and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Yongfeng Industrial / YONG-FENG
- Equipment and parts for Zwick Armaturen
- Equipment and parts for Valcor Engineering
- Equipment and parts for ZEN Group / ZEN Bearings
Documents and sources
- Zhejiang Bangye Automation Homepage
- Zhejiang Bangye Official Chinese Site
- About Bangye — Factory, Lab & Quality Systems
- Pneumatic Cylinders Catalog (DNG, DNC, ADN, NSC, JIS)
- Pneumatic Cylinder Kits (DNG, DNC, CA2, MB, NSC)
- Pneumatic Cylinder Mounting Accessories
- Pneumatic Actuators (ATY & AT Series)
- ATY Die-Cast Aluminum Pneumatic Actuator (ATY52–ATY63)
- EY Electric Actuators & Spare Attachments
- EY Series Rod-Type Electric Actuator Specifications
- Pneumatic Press Catalog (DZ & SZ Series)
- DZ Single-Column Pneumatic Press Series
- SZ Four-Column Pneumatic Press Series
- OEM Tooling, Die-Forming & CNC Services
