Thorlabs Photonics Equipment — Optical Tables, Stages, Power Meters & Lasers
Nexus optical tables, motorized stages up to 1000 mm, K-Cube and T-Cube motion controllers, PM/C-Series power meters, coherent lasers, Vytran fiber splicers, and scientific cameras from Thorlabs.
Nexus Optical Tables & Isolation Supports
Thorlabs Nexus all-steel honeycomb optical tables deliver ±0.1 mm flatness across 210 mm, 310 mm, and 460 mm thicknesses. Configurations include sealed holes, non-magnetic steel, and rigid, passive, or active self-leveling supports. ScienceDesk frames and breadboards complete lab setups.
- Nexus series: 210, 310, 460 mm thick
- Surface flatness: within ±0.1 mm
- Supports: rigid, passive, active
- Service parts: isolators, valves, seals
Optomechanical Mounts, Tubes & Cages
Thorlabs optomechanics span optical post assemblies, rails, lens tubes, 30 mm and 60 mm cage systems, and Polaris precision mounts. Vacuum-compatible hardware supports low-outgassing beamlines. Replaceable actuators, fine-pitch screws, springs, and retaining rings restore mount stability.
- Lines: Polaris mounts, 30/60 mm cages
- Modules: lens tubes, posts, optic rails
- Environments: lab & vacuum-compatible
- Parts: adjuster screws, springs, rings
Motorized & Manual Positioning Stages
Thorlabs motorized stages provide linear travel up to 1000 mm, rotation mounts, goniometers, pitch/yaw tables, and multi-axis platforms. Drive options include stepper, DC servo, direct drive, piezo inertia, and Elliptec resonant motors, plus HV versions. Actuators and cables are replaceable.
- Linear travel: up to 1000 mm
- Drives: stepper, DC servo, piezo
- Options: multi-axis & high-vacuum
- Parts: actuators, encoders, motor cables
K-Cube, T-Cube & Rack Motion Controllers
Thorlabs motion controllers cover compact K-Cube and T-Cube modules alongside benchtop and rack units for DC servo, stepper, and piezo actuators. Universal controllers and USB/Ethernet hubs integrate via Kinesis and APT software. Power bricks, driver boards, and interconnect cables are serviceable.
- Series: K-Cube, T-Cube, rack systems
- Drives: DC servo, stepper, piezo/strain
- Control: USB, Ethernet, Kinesis & APT
- Parts: power supplies, driver boards, cables
PM Power Meters & C-Series Sensor Heads
Thorlabs consoles PM100A, PM100D2, PM100D3, PM400, and PM5020 pair with red C-series photodiode, thermal, and pyroelectric sensors storing NIST-traceable calibration data across 100 pW to 20 W and 200 nm to 5.5 µm. Interchangeable fiber adapters and sensor heads simplify lab maintenance.
- Consoles: PM100A/D2/D3, PM400, PM5020
- Power range: 100 pW to 20 W (C-Series)
- Wavelength coverage: 200 nm to 5.5 µm
- Parts: sensor heads, fiber adapters, targets
Laser Sources, Diode & TEC Drivers
Thorlabs coherent light sources include laser diodes, 532 nm DPSS, HeNe, single-frequency, tunable, pulsed, and fiber lasers from visible through mid-IR wavelengths. Supporting electronics cover diode current drivers, TEC temperature mounts, and optical amplifiers with replaceable diodes and cables.
- Lasers: diode, HeNe, DPSS, fiber, pulsed
- Spectrum: visible through mid-IR
- Electronics: current & TEC controllers
- Parts: laser diodes, mounts, bias cables
Vytran Fiber Splicers, GPX & Telecom
Thorlabs Vytran fiber processing stations and GPX glass processors perform stripping, cleaning, cleaving, splicing, recoating, proof testing, and SWLI end-face inspection. Telecom test instruments cover O- to U-bands at 850, 1310, and 1550 nm. Filaments, blades, and fiber inserts are replaceable.
- Systems: Vytran family, GPX processors
- Tasks: stripping, cleaving, splicing, SWLI
- Telecom bands: 850, 1310, 1550 nm (O–U)
- Consumables: filaments, blades, V-grooves
Zelux/Kiralux Cameras, OCT & UV–THz Optics
Thorlabs imaging solutions include Zelux CMOS, high-QE Kiralux, and Quantalux monochrome sCMOS cameras alongside OCT and laser-scanning microscopy systems. Over 8,800 non-polarizing optical elements cover lenses, mirrors, filters, gratings, and prisms across UV to THz bands.
- Cameras: Zelux, Kiralux, Quantalux sCMOS
- Systems: OCT & laser-scanning microscopes
- Optics: 8,812 elements from UV to THz
- Spares: filters, objectives, beamsplitters
System Integration: Optical Tables, Stages, and Kinesis Motion Control
Thorlabs photonics setups integrate Nexus honeycomb optical tables (210, 310, or 460 mm thickness) on passive or self-leveling active isolators with 30/60 mm cage mechanics, motorized stages up to 1000 mm travel, and K-Cube, T-Cube, or rack controllers driven via Kinesis and APT software.
When specifying a turnkey assembly, confirm metric vs. imperial hole grids, stage motor type (stepper, DC servo, piezo inertia, or resonant), matching interconnect cables, and high-vacuum compatibility where required.
Optical Metering, Laser Sources, and Vytran Fiber Processing Lines
For beam diagnostics and automated testing, PM100A/D2/D3, PM400, and PM5020 consoles read NIST-traceable calibration directly from red C-series photodiode, thermal, and pyroelectric sensor heads across 100 pW to 20 W and 200 nm to 5.5 µm.
Coherent diode, HeNe, DPSS, tunable, and fiber lasers pair with TEC drivers, Zelux/Kiralux/Quantalux cameras, OCT systems, and Vytran / GPX fiber processing stations covering stripping, cleaving, splicing, recoating, proof testing, and SWLI inspection.
Thorlabs and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Thorlabs and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for NPI Lasers
- Equipment and parts for DENSsolutions
- Equipment and parts for Heal Force
- Equipment and parts for AMO / AMOSIN
Documents and sources
- About Thorlabs — 22 entities and over 24,000 photonics products
- Nexus optical tables — ±0.1 mm flatness, 210/310/460 mm thicknesses
- Optomechanical components — posts, lens tubes, cage systems, Polaris mounts
- Motorized stages — up to 1000 mm travel, stepper, DC servo, and piezo drives
- Motion controllers — K-Cube, T-Cube, benchtop and rack-based systems
- Optical power and energy meters — PM100A/D2/D3, PM400, PM5020 consoles and C-Series
- Photodiode power sensors C-Series — 100 pW to 20 W, 200 nm to 5.5 µm
- Lasers and coherent sources — visible through mid-IR wavelength systems
- Fiber fusion splicers and processing — Vytran family and GPX glass processors
- Microscopy cameras — Zelux CMOS, Kiralux, and Quantalux sCMOS families
- Optical elements — non-polarizing optics across UV, VIS, NIR, IR, and THz
- Telecommunications instruments — O- to U-bands at 850, 1310, and 1550 nm
