MarFlex pumping systems

Select MarFlex cargo, ballast, stripping and fuel transfer pumps, drives and replacement parts for the liquid properties and vessel system arrangement.

MDPD cargo pumps

A vertical single-stage pump unloads oil products and chemical cargoes. The drive shaft runs in a separate tube beside the discharge pipe. Pumphead, bearing and seal selection follows the installed column design.

  • Deck-mounted electric motor
  • Oil-lubricated shaft
  • A316L stainless steel
  • Duplex and Super Duplex options

MBDPC ballast pumps

The concentric deepwell pump removes ballast water during vessel loading and unloading. Its electric motor remains on deck. Wetted materials are selected for seawater duty and the specified pump arrangement.

  • Vessel ballast system
  • Pumphead inside the tank
  • Standard A316L construction
  • Duplex and Super Duplex options

MODP offshore pumps

The single-stage pump transfers liquid cargo from FPSO and FSO units to a shuttle tanker. Its design follows API-610. Mechanical seal and wetted material selection depend on the transferred product and installed arrangement.

  • Vertical electric drive
  • Installation inside the tank
  • Mechanical shaft seal
  • A316L, Duplex, Super Duplex

MSP-100 and MSP-150 portable pumps

Portable submersible pumps connect to a hydraulic powerpack. Their screw-centrifugal impeller limits shear on the liquid. These designs serve oil recovery and water-oil mixture handling where excessive agitation is undesirable.

  • Hydraulic drive
  • Screw-centrifugal impeller
  • Aluminium construction
  • Flexible connection hoses

MPDP pneumatic draining pumps

The self-priming double-acting piston pump removes residue after main cargo discharge. It uses clean, dry compressed air. For tanks up to 8 m deep, selection covers the piston, valves and suction filter.

  • AISI 316L construction
  • Used alongside MDPD
  • Pneumatic cylinder drive
  • Temperature limited to 90 °C

MSSP super stripping pumps

The pump creates a partial vacuum in the deepwell super stripping line. This pressure difference lifts remaining cargo from the well bottom. A deck-mounted unit transfers the liquid to another tank or the cargo manifold.

  • Deck-mounted arrangement
  • Super stripping line
  • Standard A316L material
  • Duplex and Super Duplex options

VSDS electric drives and control

A frequency converter varies the speed of an electric deepwell pump. The duty point is matched to cargo properties. Drive replacement requires checking motor settings, protection circuits and vessel automation connections.

  • Variable speed operation
  • Soft motor starting
  • Individual pump control
  • Cargo monitoring connection

Methanol fuel transfer pumps

MarFlex offers a dedicated deepwell pump solution for methanol fuel transfer. The system includes autonomous monitoring. Selection considers the vessel fuel circuit, fluid properties and compatibility with control equipment.

  • Electric deepwell pump
  • Methanol fuel circuit
  • Autonomous monitoring
  • Control system integration

Selecting a pump system

MDPD cargo pumps, MBDPC ballast pumps and MODP offshore pumps serve different duties. Flow, head, density and viscosity define the required operating point. Replacement selection also checks tank depth, column arrangement, deck connection and motor.

The main pump, stripping circuit and control system are specified together.

Materials and transferred liquids

MarFlex describes A316L construction and Duplex or Super Duplex options for MDPD, MBDPC and MODP. Selection depends on the actual liquid and pump arrangement. A similar connection does not make a ballast pump interchangeable with a cargo pump.

Methanol fuel transfer is treated as a separate circuit with its own equipment requirements.

Stripping and portable equipment

MPDP removes residue using a pneumatically driven piston mechanism. MSSP creates a partial vacuum in a super stripping line. The two principles have different arrangements and application conditions.

Portable MSP-100 and MSP-150 pumps connect to a hydraulic powerpack; their screw-centrifugal impeller suits water-oil mixtures requiring limited agitation.

Smart Pumping automation levels

Basic recommends pump speed using cargo properties. Enhanced processes operating data automatically and adjusts speed and valve positions. Autonomous integrates with the loading plan and automates discharge through to valve closure when unloading finishes.

Functional scope is selected together with the drive and vessel control system.

Replacement parts and compatibility

Pumpheads, bearings, seals, couplings, filters and valves depend on the installed design. The troubleshooting guide lists strainer 486907, filter 486910 and non-return valve 485016. These references must match the installed pump parts list; a shared brand name alone does not establish compatibility.

MarFlex and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of MarFlex and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.