ZUWA (ZUWA-Zumpe GmbH) Industrial Pumps and Filling Stations
ZUWA-Zumpe industrial fluid equipment: dry self-priming impeller pumps (UNISTAR, COMBISTAR, NIROSTAR, ACOSTAR), high-viscosity gear pumps (VISCOSTAR, VISCOMAT), vane pumps (Panther, EX ATEX), SW centrifugal and Pro-One AODD pumps, and Mobilcenter flushing stations. Technical selection by medium and nameplate.
UNISTAR and COMBISTAR Impeller Pumps
UNISTAR aluminum impeller pumps deliver up to 120 l/min at 5 bar for non-abrasive fluids, while COMBISTAR models with stainless steel 1.4404 wetted parts handle abrasive media up to 60 l/min. Drill pumps 2001-A/B operate up to 90 °C. Spare impellers come in NBR, EPDM, CR, FKM, and TPU.
- Flow up to 120 l/min, 5 bar
- Dry self-priming up to 3 m
- Viscosity up to 20,000 mPas, 90 °C
- Impellers: NBR, EPDM, CR, FKM, TPU
NIROSTAR Stainless and ACOSTAR PTFE Pumps
NIROSTAR stainless steel 1.4404 impeller pumps (2000-A to 2000-F) deliver up to 730 l/min at 5 bar for corrosive, food, and chemical media. Version 2000-C PLUS services with one screw, alongside NIROSTAR 2000-A ATEX. ACOSTAR 2000-A PTFE chemical pumps provide up to 28 l/min at 3 bar.
- Stainless steel 1.4404 and PTFE
- Flow up to 730 l/min (NIROSTAR)
- Up to 28 l/min, 3 bar (ACOSTAR)
- 2000-C PLUS and ATEX options
VISCOSTAR and VISCOMAT Gear Pumps
VISCOSTAR 2000-A/B gear pumps (Types A-F, GG25 iron housing, hardened steel gears) handle oils up to 4,000 cSt, +230 °C, 70 l/min, and 20 bar. VISCOMAT 200/230/350 and Gerotor reach 25 bar at 12/24/230/400 V. Service parts cover ceramic/graphite/FKM seals, gears, and bypass valves.
- Oil viscosity up to 4,000 cSt
- Fluid temp up to +200 / +230 °C
- Pressure up to 25 bar, 70 l/min
- Ceramic/graphite/FKM shaft seals
Panther, E-Series, and EX Vane Pumps
Panther 56/72/90 vane pumps transfer diesel and heating oil at 35-90 l/min and 2 bar. E 80/120/140 reach 140 l/min, Viscomat 70/90 deliver 6 bar, and EX 50-140 hold ATEX II 2 G Ex d IIA T4 Gb for gasoline. Spare parts cover rotor blades, springs, 500 µm strainers, and shaft seals.
- Diesel, oil, gasoline, kerosene
- Flow 25-140 l/min, up to 6 bar
- ATEX II 2 G Ex d IIA T4 Gb
- Motors: 12 V, 24 V, 230 V, 400 V
Centrifugal Pumps SW, Jet, CM, and P
Open-impeller SW 200-750 wastewater pumps handle dirty water up to 1,600 l/min with 30 mm solids at 80 °C. Multi-stage stainless CM 100/200 NIRO reach 6 bar, while Jet 100-300 and P50/P80/P90 deliver up to 9 bar. Spare parts include brass/iron impellers, SiC seals, and check valves.
- SW 200-750: 1,600 l/min, 30 mm solids
- CM NIRO: stainless steel, 6 bar
- P80/P90 and Jet: up to 9 bar
- 230/400 V electric & engine drives
Pro-One AODD and MC Diaphragm Pumps
Pro-One air-operated double-diaphragm (AODD) pumps in stainless steel, polypropylene, and aluminum deliver up to 600 l/min at 8 bar with dry-run safety. Options cover No Pulse dampers, silencers, and stroke sensors. Spare parts include diaphragms, ball valves, air spools, and sensors.
- Flow up to 600 l/min, 8 bar
- Housings: stainless, PP, aluminum
- No Pulse dampers & stroke sensors
- Diaphragms, ball valves, air kits
Mobilcenter Filling and Flushing Stations
Solarcheck Mobilcenter, FLUSH PRO Mobilcenter, and Descale Mobilcenter mobile stations combine dry self-priming UNISTAR or NIROSTAR pumps with 30 to 120 liter canisters for flushing, filling, venting, and descaling circuits. Parts include sight-glass filters, EPDM/PVC hoses, and relief valves.
- Solarcheck: 30 l/min, up to 8 bar
- FLUSH PRO: 60-90 l/min, 30-120 l
- Descale: NIROSTAR, Viton seals
- Sight-glass filters, hoses, valves
Barrel Sets, AdBlue®, and Flat Suction Kits
ZUWA barrel sets cover AdBlue 81606 kits (35 l/min, 1.6 bar), diesel/oil kits, and pneumatic P3.5/P5.5 or P60:1 Booster grease pumps up to 420 bar. Flat suction sets and Elephant 2001-B drain down to 1 mm. Spare parts include A60/SB325 nozzles, K24/K33/K400 meters, and dry-run guards.
- AdBlue 81606: 35 l/min, 1.6 bar
- Flat suction down to 1 mm residual
- P60:1 grease booster up to 420 bar
- A60/SB325 nozzles & K24-K400 meters
Engineering Selection of ZUWA-Zumpe Pumps and Fluid Systems
Equipment selection across the ZUWA-Zumpe GmbH range depends on fluid chemistry, viscosity, operating temperature, and solids content.
UNISTAR aluminum impeller pumps handle non-abrasive liquids up to 120 l/min at 5 bar; COMBISTAR with stainless steel 1.4404 wetted parts handles abrasive media up to 60 l/min; NIROSTAR 1.4404 pumps cover corrosive, chemical, and food duties up to 730 l/min; and ACOSTAR 2000-A PTFE pumps transfer acids, alkalis, and solvents up to 28 l/min at 3 bar.
For high-viscosity oils and thermal fluids up to 4,000 cSt and +230 °C, VISCOSTAR GG25 gear pumps operate at 10-20 bar while VISCOMAT and Gerotor models reach 25 bar.
Fuel transfer uses Panther, E-Series, or ATEX II 2 G Ex d IIA T4 Gb EX vane pumps, whereas SW open-impeller centrifugal pumps move up to 1,600 l/min with 30 mm solids and Pro-One AODD pumps deliver up to 600 l/min at 8 bar.
Impeller Elastomers, Drives, and Mobilcenter Cart Configuration
Replaceable flexible impellers match the pumped medium: NBR (Perbunan) for oils and diesel, EPDM for hot water and glycol up to 90 °C, CR for general duty, FKM/FPM (Viton) for aggressive chemicals, and TPU for abrasive slurries.
Drive options span 230 V AC, 400 V three-phase, 12/24 V DC, compressed-air motors, and 2001-A/B drill adapters.
Mobile Solarcheck Mobilcenter (30 l/min, up to 8 bar, 30 l canister), FLUSH PRO Mobilcenter (60-90 l/min, 30/55/120 l tanks), and Descale Mobilcenter carts integrate dry self-priming pumps, sight-glass fine filters, pressure-relief valves, and EPDM or PVC hoses for closed-loop solar, geothermal, and heat-exchanger service.
ZUWA and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ZUWA and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Zumbach Electronic
- Equipment and parts for Yilmaz Reduktor
- Equipment and parts for Zucchini S.R.L. / Zucchini Packaging
- Equipment and parts for Yingkou Jinchen Machinery / Jinchen Corp
Documents and sources
- ZUWA-Zumpe GmbH official website — overview and contacts
- About ZUWA — manufacturing in Laufen and ISO 9001:2015
- ZUWA company history — UNISTAR, NIROSTAR, ACOSTAR, Solarcheck milestones
- ZUWA flexible impeller pumps — UNISTAR, COMBISTAR, NIROSTAR, ACOSTAR
- ZUWA drill pumps — UNISTAR / COMBISTAR / NIROSTAR 2001-A/B
- ZUWA gear pumps — VISCOSTAR (A-F), VISCOMAT 200/230/350 and Gerotor
- ZUWA vane pumps — Panther, Viscomat, E-Series and EX (ATEX)
- ZUWA centrifugal pumps — SW 200-750, CM NIRO, Jet and P50/P80/P90
- ZUWA diaphragm pumps — Pro-One (AODD) and MC series
- Solarcheck Mobilcenter solar filling and flushing stations
- FLUSH PRO Mobilcenter flushing stations (60/30, 90/55, 90/120)
- Descale (Antikalk) Mobilcenter heat exchanger descaling stations
- ZUWA barrel and dispensing pumps — AdBlue, oil, diesel, P60:1
- ZUWA flat suction systems — Basic, Kompakt, Top and Elephant
