Milwaukee Cylinder hydraulic and air cylinders, power units

Technical selection of Milwaukee Cylinder (USA) products: Series H, MH, LH, HNT and HD hydraulic cylinders, A, MA, MD/MT and MR air cylinders, Vulcan cylinders, power units, BA and BD boosters.

Series H hydraulic cylinders

Milwaukee Cylinder Series H tie rod hydraulic cylinders have steel construction, 3000 PSI hydraulic service and 5000 PSI non-shock service, NFPA mounting styles and cataloged bores of 1.5 to 12 in; larger bores are available. Vulcan and the ARC, ABC and ICB options are built on Series H.

  • Service: 3000 PSI
  • Non-shock: 5000 PSI
  • Bore: 1.5 to 12 in
  • Mounting: NFPA styles

Series MH metric cylinders

Series MH metric hydraulic tie rod cylinders are built to ISO Standard 6020/2, 160 bar series, with working pressures up to 210 bar. They have steel construction, 25 to 200 mm bores, cushions at either or both ends and single or double rod end designs.

  • Standard: ISO 6020/2
  • Pressure: up to 210 bar
  • Bore: 25 to 200 mm
  • Cushions: one or both ends

Series LH hydraulic cylinders

Series LH low pressure hydraulic tie rod cylinders have steel construction, 750 to 1,500 PSI hydraulic service, NFPA mounting styles and cataloged bores of 1.5 to 6 in; larger bores are available. The ABC option can be used on Series LH but may require more engineering.

  • Service: 750–1500 PSI
  • Bore: 1.5 to 6 in
  • Mounting: NFPA styles
  • Construction: steel

Series A, MA, MD/MT and MR air cylinders

Steel Series A (250 PSI, 1.5 to 16 in bores) and aluminum Series MA (250 PSI, 1.5 to 10 in, replaces Series MN) are air tie rod cylinders with NFPA mounting styles. MD/MT have a twin rod design with an integrated tooling plate at 250 PSI. Stainless Series MR has no tie rods and is rated 170 PSI.

  • Series A: steel, 250 PSI
  • Series MA: aluminum, 250 PSI
  • MD/MT: twin rod
  • Series MR: stainless, 170 PSI

HNT and HD non-tie-rod cylinders

Series HNT hydraulic cylinders have no tie rods: a threaded tube, a mounting flange and bolted end caps, service up to 3,000 psi, 1.5 to 8 in bores, 5/8 to 5.5 in rods and 12 standard mounting styles. Series HD is rated for continuous 5,000 psi for punching thick metal at 17.5 to 100 tons.

  • HNT: up to 3000 psi
  • HNT bore: 1.5 to 8 in
  • HD: continuous 5000 psi
  • HD: 17.5 to 100 tons

Vulcan water-cooled cylinders

Vulcan high temperature solutions are based on Series H: high temperature seals, rod boots, water-cooled cylinders and water-cooled bearings. A jacket carries heat away from the cylinder, and bushing cooling protects the seals; an appropriate coolant rather than plain water is normally used.

  • Base: Series H
  • Cooling: barrel jacket
  • Cooling: rod bushing
  • Seals: up to 500 °F

Hydraulic power units and valves

Vertical gear pump power units reach 3,000 psi with 0.545–10 GPM flow and 10–30 gallon reservoirs; vane pump units with pressure-compensated, variable-displacement pumps work to 2,000 psi at 4–8 GPM with a 20 gallon reservoir. D03 and D05 valves, manifolds and mounting kits are offered.

  • Gear pump: 3000 psi
  • Vane pump: 2000 psi
  • Reservoir: 10–30 gal
  • Valves: D03 and D05

BA and BD pressure boosters

Pressure boosters convert lower-pressure air input into higher hydraulic pressure. Model BA is dual-pressure, with a low-pressure approach, a high-pressure work stroke and self-bleeding; Model BD keeps high pressure throughout the work stroke. Input is rated 250 psi, output up to 3,000 psi.

  • Input: 250 psi
  • Output: up to 3000 psi
  • Model BA: dual-pressure
  • Model BD: single-pressure

Choosing a Milwaukee Cylinder cylinder

Milwaukee Cylinder was established in 1956 and is located in Cudahy, Wisconsin, USA.

It makes a standard range of hydraulic and pneumatic NFPA tie-rod cylinders and custom cylinders: mechanical locking, position-sensing and non-rotating designs, as well as replacements for non-NFPA cylinders built overseas.

Selection starts with pressure and medium: Series H (3000 PSI), MH to ISO 6020/2 (up to 210 bar) and LH (750–1500 PSI) hydraulic cylinders, Series A, MA, MD/MT and MR air cylinders.

For high pressure without tie rods there are HNT (up to 3,000 psi) and HD (continuous 5,000 psi); for hot zones, Vulcan built on Series H.

Bores, pressures and options

Series H: 1.5 to 12 in bores, NFPA mounting styles; Series LH: 1.5 to 6 in; Series A: 250 PSI, 1.5 to 16 in; MA: 250 PSI, 1.5 to 10 in; stainless Series MR: 170 PSI. Series MH: 25 to 200 mm bores, cushions at either or both ends.

Series H options include ARC (oil flushing at end of stroke), ABC (flush chamber with a secondary wiper) and ICB (integrated counterbalance valve set at the factory). Position sensing provides continuous and discrete indication, end-of-stroke signals and RFID tags.

Power units, boosters and manipulators

Vertical power units: gear pump up to 3,000 psi (0.545–10 GPM, 10–30 gallon reservoir) or vane pump up to 2,000 psi (4–8 GPM, 20 gallon reservoir); D03 and D05 valves. Boosters BA and BD: 250 psi input, output up to 3,000 psi; air-oil tanks and nitrogen-oil accumulators.

The Pow'r Arm manipulator positions loads up to 2,000 pounds (909 kg); its power supply has a pre-set relief valve and a check valve. Pow'r Reach comes in 250 pound (114 kg) or 750 pound (341 kg) capacity, with 58 in (1473 mm) vertical travel, 8.5 ft (2.6 m) reach and 350 degree rotation.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.