Yeong Long Air Hydraulics (Yung Long) Hose Crimping Machinery
Industrial hose crimpers, side-feed and nut crimpers, skiving and cutting machines, and burst test benches by Yeong Long Air Hydraulics (Yung Long) from YL-16 to YL-330.
Workshop Crimpers YL-20, YL-20S & YL-32
Workshop hydraulic crimpers YL-20, YL-20S and YL-32 serve hose repair shops up to 1 1/4" and 2". Driven by 3.6 kW and an 11.5 L/min pump, they reach 1700–2200 kN force. Spares cover code 32 dies, 99/80 mm master jaws, and back stops.
- Range: ψ4–ψ87 mm (up to 2")
- Force: 1700–2200 kN
- Code 32 dies: 9 / 12 sets
- Motor: 3.6 kW, IP54, 71 dB(A)
Serial Production Crimpers YL-40 to YL-80
Serial production crimpers YL-40, YL-45, YL-65 and YL-80 run continuously for hours without frequent greasing. The 5.5 kW, 48 L/min unit drives YL-65 to 2400 crimps/hour at 2400 kN and YL-80 up to 4" at 3200 kN. Parts cover code 32/80 dies and seals.
- Range: ψ4–ψ125 mm (up to 4")
- Force: 2400–3200 kN
- Output: up to 2400 crimps/hr
- Drive: 5.5 kW, 48 L/min pump
Big-Diameter Industrial Crimpers YL-125 & YL-330
YL-125 and YL-330 crimp industrial hoses and steel pipes up to 12" for mining, oil, gas, and chemical transport. YL-330 delivers 8300 kN via a 7.5 kW motor and 120 L/min pump at 1200 crimps/hour. Spares include code 125/330 dies and seals.
- Range: ψ4–ψ335 mm (up to 12")
- YL-330 Force: 8300 kN
- Drive: 7.5 kW, 120 L/min
- Tooling: code 125 & 330 dies
Mobile CS-20 / CS-32 & Handy Crimpers YL-16
Mobile CS-20 and CS-32 units alongside handy models YL-16HPZ, YL-16HP and YL-16AP serve field hose repair. Running on DC 12V/24V (1.6/2.2 kW), the 160 kg CS-32 achieves 2200 kN up to 2". Replacement parts cover DC motors, pumps, and code 32 dies.
- CS-32 Power: DC 12V / 24V
- Force: 2200 kN, up to 2" hose
- Handy models: YL-16HPZ / HP / AP
- Weight: 160 kg, IP54 enclosure
Side-Feed YL-SF & Nut Crimping Machines YL-NC
Side-feed YL-SF30 and YL-SF60 load multi-bend automotive A/C, brake and turbo hoses from the broadside at 600 kN (ψ4–87 mm). Nut crimpers YL-NC-20 and YL-NC-30 press nuts and ferrules at 500 kN and 2100 cycles/hr. Spares include SF60 and nc20 dies.
- YL-SF60: broadside load, 600 kN
- YL-NC-20: nuts/ferrules, 500 kN
- NC-20 Output: 2100 crimps/hr
- Tooling: SF60 & nc20 dies
Hose Skivers SK-16 / HSK-16 & Cutters CM-50 / CM-120
SK-16 and manual HSK-16 skive 1/4" to 2" 4SP hoses via dual symmetrical blades (0.4 kW, 233/284 rpm). Cutters CM-50 and CM-120 slice up to 2"-4SH lines using a ψ350x2.5x32 mm blade at 7.5 kW and 2800/3400 rpm. Consumables include blades and skiving tools.
- SK-16: 1/4"–2" 4SP dual-blade
- CM-120: cuts up to 2"-4SH
- Blade: ψ350 x 2.5 x 32 mm
- Motor: 7.5 kW, 2800/3400 rpm
Hose Burst & Pressure Test Bench BT-2100
BT-2100 runs burst and pressure tests up to 2100 kg/cm2 (2058 bar) from a 6 bar (1/2" PT) plant air line. Equipped with a 48 L water reservoir and 3000 bar gauge, it offers four 1/4"F ports in a 300 kg frame. Spares cover booster seals and check valves.
- Test Pressure: up to 2058 bar
- Air Supply: max 6 bar, 1/2" PT
- Ports: 4 x 1/4"F, 3000 bar gauge
- Reservoir: 48 L, weight 300 kg
Hoses, Fittings, Accessories & AI Cooling Parts
Yeong Long (Yung Long) also produces industrial hoses, iron, brass, ductile iron and stainless steel fittings, quick couplers, mold water connectors, and ball valves. A dedicated line covers sanitary fittings, ferrules and clamps for AI server liquid cooling.
- Fittings: iron, brass, stainless
- Quick couplers & mold connectors
- AI data center cooling components
- Dies, foot pedals & back stops
Selecting Yeong Long Air Hydraulics (Yung Long) Crimpers by Hose & Output
Field maintenance teams deploy handy YL-16HPZ / YL-16HP / YL-16AP units or DC 12V/24V mobile crimpers CS-20 and CS-32 (2200 kN in a 160 kg frame). Stationary hose workshops rely on YL-20, YL-20S (1 1/4", 1700 kN) and YL-32 (2", 2200 kN) using code 32 dies and 99/80 mm master jaws.
Continuous factory lines adopt YL-40, YL-45, YL-65 (2400 crimps/hour) and YL-80 (up to 4", 3200 kN, code 32/80 dies), while heavy mining, oilfield, and chemical pipe factories use YL-125 and YL-330 up to 12" (8300 kN).
Multi-bend automotive A/C and brake tubes are processed on YL-SF30 and YL-SF60 side-feed presses.
Hose Cutting, Skiving & 2058 Bar Burst Testing Line Integration
A complete hose assembly cell pairs CM-50 or CM-120 cutters (2"-4SH capacity, ψ350x2.5x32 mm blade, 7.5 kW, 2800/3400 rpm) with HSK-16 manual or SK-16 dual-blade skiving machines for 1/4" to 2" 4SP hoses and YL-NC-20 / YL-NC-30 nut crimpers.
Final pressure verification runs on the BT-2100 hose test bench up to 2100 kg/cm2 (2058 bar) driven by 6 bar shop air (1/2" PT), equipped with a 48 L water tank, 3000 bar gauge, and four 1/4"F high-pressure outlets.
Yeong Long Air Hydraulics (Yung Long) Engineering Architecture & Die Codes
Founded in 1988 in Taiwan with headquarters in Taichung and manufacturing in Nantou, Yeong Long Air Hydraulics Co., Ltd. (also branded Yung Long) produces hose processing machinery, industrial hoses, fittings, quick couplers, and AI data center cooling pipe components.
Machine sizing depends on target hose inner diameter, wire reinforcement (4SP, 4SH or industrial steel pipe), power supply rating (220V/440V AC or 12V/24V DC), and compatible die set codes (32, 80, 125, 330, SF60 or nc20) with master die lengths from 80 to 220 mm.
Yeong Long Air Hydraulics and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Yeong Long Air Hydraulics and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Vickers
- Equipment and parts for TSUBAKI KABELSCHLEPP
- Equipment and parts for Colonial Tool Group
- Equipment and parts for YUYI Technology
Documents and sources
- Yeong Long Air Hydraulics (Yung Long) official site
- About Yeong Long Air Hydraulics Co., Ltd.
- Quality control and CE safety testing
- Full product catalog (14 categories)
- Handy crimpers YL-16HPZ / YL-16HP / YL-16AP
- Mobile crimping machines CS-20 & CS-32
- CS-32 mobile crimper technical specifications
- Workshop crimpers YL-20, YL-20S & YL-32
- YL-20 workshop crimper specifications
- YL-20S quick-change workshop crimper specs
- YL-32 2-inch workshop crimper specifications
- Side feed crimping machines YL-SF30 & YL-SF60
- YL-SF60 side feed crimper specifications
- Serial production crimpers YL-40 to YL-80
- YL-65 serial crimper specifications
- YL-80 4-inch serial crimper specifications
- Industrial big-diameter crimpers YL-125 & YL-330
- YL-330 12-inch industrial crimper specs
- YL-NC-20 nut crimping machine specifications
- Hose skiving machines HSK-16 & SK-16
- SK-16 dual-blade hose skiver specifications
- CM-120 hydraulic hose cutter specifications
- BT-2100 hose burst test bench specifications
- Hydraulic fittings, quick couplers & valves
- AI data center liquid cooling pipe components
