W.C. Branham (WC Branham) Actuators, Caliper Brakes & Gearboxes

Industrial fluid power and power transmission from W.C. Branham: DURATRK, MAGTEC, PNEU-SA, and OVLPRO pneumatic cylinders, caliper disc brakes (600 to >150,000 in-lbs), Insert-A-Shaft and BWG4 right-angle gearboxes, and INT05–INT36 intensifiers.

DURATRK & MAGTEC Rodless Air Cylinders

DURATRK band-type rodless air cylinders come in six bore sizes from 18 to 63 mm as drop-in replacements for common industrial models. MAGTEC magnetically coupled units feature enclosed bodies for sanitary washdown duty. Replaceable parts include sealing bands, pistons, and carriages.

  • DURATRK: 18–63 mm (6 bores)
  • Drop-in mounting footprint
  • MAGTEC enclosed sanitary body
  • Replaceable bands & seals

PNEU-SA & Rodless Cable Air Cylinders

W.C. Branham cable cylinders span nine bores from 3/4 to 5 inches, pairing with reed switches and caliper brakes for position holding. Enclosed PNEU-SA models integrate self-lubricating bearings and internal seals. Guided, single-acting, and tension variants share repair kits.

  • 9 bore sizes from 3/4" to 5"
  • PNEU-SA enclosed cable unit
  • Guided & tension variants
  • Cable & crossover repair kits

OVLPRO & ULTRIQ Low-Profile Cylinders

OVLPRO low-profile cylinders use a high-strength aluminum body with an oval piston that prevents unwanted rod rotation in tight spaces. Ultra-compact ULTRIQ pancake air cylinders cover short-stroke clamping. Sensor grooves and seal replacement kits simplify maintenance.

  • Anti-rotation oval piston
  • High-strength aluminum body
  • ULTRIQ pancake air series
  • Sensor-ready & seal kits

ARTEC ISO Cylinders & Grippers via W.C. Branham

W.C. Branham offers ARTEC pneumatic actuators (trademark of Artec S.r.l., Italy) covering ISO/UNITOP, round 32–63 mm, stainless steel with FDA seals, stopper cylinders 20–80 mm, and angular grippers 16–50 mm. Anti-rotation hollow rods and high/low-temperature seal options support harsh duty.

  • ISO/UNITOP & 32–63 mm round
  • Stoppers 20–80, grippers 16–50
  • Stainless steel & FDA seals
  • High/low-temp seal options

Pneumatic & Hydraulic Caliper Disc Brakes

W.C. Branham machined and molded aluminum caliper brakes with hardcoated housings deliver 600 to over 150,000 inch-pounds of braking torque. Pneumatic and hydraulic models (H38–H962) produce 70–693 lbf per 100 psi up to 1,500 psi rating with replaceable non-asbestos pads.

  • 600 to >150,000 in-lbs torque
  • 70–693 lbf per 100 psi force
  • H38–H962 up to 1,500 psi
  • Replaceable non-asbestos pads

Spring-Applied, Mechanical Brakes & Disc Hubs

Pneumatic and hydraulic spring-applied fail-safe calipers (FS38, FS47, FS200, FS400, FS500) generate 216 to 12,236 lbf tangential force under 100 psi release, alongside mechanical and dual-function units. Blanchard-ground 1010 carbon steel discs (6 5/16" to 16", 80 RMS) pair with fixed or QD hubs.

  • 216–12,236 lbf spring fail-safe
  • Mechanical & Dual Function
  • 1010 steel discs 6 5/16"–16"
  • 80 RMS finish & QD/fixed hubs

Right-Angle Gearboxes: Insert-A-Shaft & BWG4

Made in the USA, the gearbox line spans Insert-A-Shaft hollow-bore helical drives (1"–3" and 25–76.2 mm, CRL, Washdown, stainless), Include-A-Shaft 1:1 (1,800 rpm), compact MICROGEAR, spiral bevel 1:1/2:1, and BWG4 worm units (10:1/20:1, 624 in-lb). Housings are pre-lubricated.

  • Insert-A-Shaft 1"–3" & 25–76.2 mm
  • CRL, Washdown & stainless steel
  • BWG4 worm 10:1/20:1, 624 in-lb
  • Include-A-Shaft 1:1, 1,800 rpm

Air-Over-Oil Intensifiers INT05–INT36 & OVLBOOST

Air/oil intensifiers convert 80–100 psi plant air into up to 3,600 psi hydraulic pressure without a full power pack. Series INT05 (5:1), INT09 (9:1), INT10 (10:1), INT18 (18:1), INT20 (20:1), INT36 (36:1), and low-profile OVLBOOST 44 mm (7.8:1) feature quad-seal pistons in Buna-N or EPDM.

  • Ratios 5:1, 7.8:1 up to 36:1
  • 80–100 psi air to 3,600 psi oil
  • OVLBOOST 44 mm (1.5"/3.0" stroke)
  • Quad-seal Buna-N or EPDM

W.C. Branham Manufacturing Profile

Headquartered at 398 Troy Street, River Falls, Wisconsin (USA), W.C. Branham, Inc. has engineered fluid power and power transmission assemblies for more than 40 years.

Core proprietary lines span rodless band and cable air cylinders, caliper disc brakes, sealed right-angle gearboxes, and air-over-oil intensifiers.

The pneumatic actuator portfolio also includes ARTEC® ISO/UNITOP, round, stainless steel, stopper cylinders, and angular grippers (trademark of Artec S.r.l., Cento, Italy) alongside custom 3D CAD parallel gear drives and 4-inch bore magnetic cylinders.

Selecting Linear Actuators & Right-Angle Gearboxes

Machine builders match space and environmental constraints across DURATRK band-type cylinders (18–63 mm, drop-in footprints), enclosed MAGTEC magnetic cylinders for sanitary washdown, PNEU-SA and cable cylinders (3/4" to 5" bore), and anti-rotation oval-piston OVLPRO units.

Ninety-degree drives include Insert-A-Shaft hollow-bore helical gearboxes in inch (1"–3") and metric (25–76.2 mm) centerlines, CRL continuous-lubrication and stainless steel variants, MICROGEAR compact drives, 1:1/2:1 spiral bevel crossovers (Zero-Max, Mitrpak, Tol-O-Matic), and BWG4 worm units (10:1, 20:1, up to 1,800 rpm and 624 in-lb).

Matching Caliper Brakes & Air-Over-Oil Intensifiers

Hardcoated machined and molded aluminum caliper brakes cover 600 to over 150,000 inch-pounds of braking torque on Blanchard-ground 1010 carbon steel discs (6 5/16" to 16", 80 RMS finish) with replaceable non-asbestos friction pads and fixed or QD hubs.

Where plant compressed air (80–100 psi) powers hydraulic calipers without a dedicated hydraulic unit, INT05/INT10/INT20 (5:1 to 20:1) pair with retractable-piston H38/H47/H200 calipers, while INT09/INT18/INT36 (up to 3,600 psi) match H491/H493/H962 and spring-applied FS38–FS500 brakes.

W.C. Branham and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of W.C. Branham and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.