Graver Technologies Filter Elements, Membranes and Resins

Graver Technologies (USA, Marmon group): ZTEC PES and TefTEC PTFE membrane cartridges, Stratum depth filters, High Flow RF, TPE sintered metal, Scepter membranes, Aegis septa and Powdex resins.

ZTEC and WaterTEC PES Membrane Cartridges

Graver makes its TECpore polyethersulfone membrane in the USA in 0.03–0.65 micron ratings; it is the basis of ZTEC, WaterTEC, QSL and QCR. ZTEC G is absolute rated from 0.1 to 0.65 μm with 0.65 m² of membrane per 10″ element. ZTEC P is sterilizing grade, ZTEC E serves ultrapure water.

  • TECpore membrane: 0.03–0.65 μm
  • ZTEC G: 0.1–0.65 μm absolute
  • ZTEC G: 0.65 m² per 10″
  • ZTEC P: ISO Class 7 cleanroom

TefTEC and Citadel PTFE Membrane Cartridges

TefTEC and TefTEC V combine a PTFE membrane with polypropylene; TefTEC V suits compressed air and tank vents, while TefTEC P membrane cartridges give complete bacterial retention. Citadel pairs a PTFE membrane with PFA parts, rated 0.05–10 micron, for etchers, strippers and bulk chemicals.

  • Citadel: 0.05–10 μm
  • Citadel: PFA structural parts
  • TefTEC P: bacterial retention
  • TefTEC V: air and tank vents

Stratum, PMA and GFP Depth and Pleated Cartridges

Stratum A are polypropylene depth cartridges, absolute rated from 0.3 to 100 microns at 99.9% efficiency. MBC and Crystal MBF carry nominal ratings of 1–75 microns. All-polypropylene PMA cover 0.2–100 μm at 99.98% (Beta 5000), and pleated GFP borosilicate microfiberglass run up to 110 °C.

  • Stratum A: 0.3–100 μm absolute
  • MBC: 1–75 μm nominal
  • PMA: 99.98% (Beta 5000)
  • GFP: up to 110 °C

High Flow RF Cartridges and Housings

High Flow RF are 16.5 cm diameter pleated polypropylene cartridges, absolute rated from 1 to 100 microns. Flow is up to 302 lpm in P2 and up to 1,890 lpm in P30, maximum temperature is 80 °C and change-out is recommended at 2.4 bar. RF housings hold 1–15 elements, rated 10.3 bar at 125 °C.

  • Cartridge diameter: 16.5 cm
  • RF rating: 1–100 μm
  • P30 flow: up to 1,890 lpm
  • RF housing: 1–15 elements

TPE Sintered Metal Filter Cartridges

TPE are metal filter cartridges made entirely of sintered titanium or 316 stainless steel powder. They are cleanable and backwashable for reuse, and high-temperature sintering prevents media migration. They serve liquids and gases under temperature extremes, high pressures and corrosive conditions.

  • Material: sintered titanium
  • Option: 316 stainless powder
  • Cleaning: backwash
  • Service: liquids and gases

Scepter Tubular Cross-Flow Membranes

Scepter are tubular cross-flow membranes: a sintered titanium dioxide coating is bonded to a porous stainless steel tube, built in 316L or high-nickel alloys. Tube IDs are 6–25 mm, nominal ratings are 0.1 μm (MF) or 0.02 μm (UF), design pressures 10.3–207 bar, and temperatures up to 371 °C.

  • Tubes: 6–25 mm ID
  • Rating: 0.1 or 0.02 μm
  • Pressure: 10.3–207 bar
  • Temperature: up to 371 °C

Aegis Condensate Polishing Septa

Aegis Precision Wound septa are wound from polypropylene yarn and matched to Powdex and Ecodex resins. DualGuard I combines a precoat surface with 1–25 micron pleated media; AFA are non-precoatable backwashable pleated septa rated 1–25 μm. PowerGuard: 1–350 μm, collapse strength over 400 PSID.

  • DualGuard I: 1–25 μm
  • AFA: 1–25 μm absolute
  • PowerGuard: 1–350 μm
  • PowerGuard: over 400 PSID

Powdex, Ecodex and Gravex Ion Exchange Resins

Powdex powdered ion exchange resins are precoated on filter septa at up to 4 gallons per minute per square foot, with an operator-set cation-to-anion ratio. Grades include PAO, PCH, PCM, PCN and Premix 22H. Ecodex bonds Powdex resin with microfine fibers; Gravex NG grades are nuclear grade.

  • Powdex: up to 4 gpm/ft²
  • Powdex: PAO, PCH, PCM, PCN
  • Ecodex: resin with microfibers
  • Radex: liquid radwaste

Selecting Graver Filter Elements by Fluid and Rating

Water, beverage and pharmaceutical duties use cartridges built on the TECpore PES membrane (0.03–0.65 micron): ZTEC G absolute rated from 0.1 to 0.65 μm, sterilizing grade ZTEC P and ZTEC E for ultrapure water.

Aggressive chemicals call for Citadel with a PTFE membrane and PFA parts (0.05–10 micron); compressed air and tank vents use TefTEC V.

Prefiltration is covered by Stratum A depth cartridges (0.3–100 microns, 99.9%) and MBC (1–75 microns nominal); high flows by 16.5 cm diameter High Flow RF, up to 1,890 lpm in the P30 configuration.

For high temperatures and pressures there are TPE sintered titanium or 316 stainless cartridges and Scepter tubular membranes up to 371 °C and 207 bar.

Graver Technologies and Condensate Polishing

Graver Technologies is part of Marmon Holdings, Inc., a Berkshire Hathaway company. It was founded in 1866 in Lima, Ohio; since 1993 its headquarters have been in Glasgow, Delaware, and ion exchange resins are made in Newark, New Jersey. The Graver Technologies name dates from 1998.

For power plant condensate polishing Graver makes both septa and resins: Aegis Precision Wound precoatable septa are matched to Powdex and Ecodex resins, DualGuard I and AFA use 1–25 micron pleated media, and PowerGuard covers 1–350 μm.

Powdex powdered resins run at flow rates up to 4 gallons per minute per square foot of septum.

Graver Technologies and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Graver Technologies and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.