Meyrat motorized and belt driven spindles

Technical selection of Meyrat SA (Switzerland) spindles: MHF, MHT, MDS and MGS-60 motorized spindles, MBC belt driven spindles.

MHF high frequency spindles

MHF are high frequency motorized spindles with synchronous or asynchronous motors for swiss-type turning, dressing, electro-erosion, milling and grinding. Body diameters range from 16 to 80 mm, speeds from 40,000 to 80,000 rpm. Lubrication is grease or air-oil.

  • MHF speed: 40,000–80,000 rpm
  • MHF-16 Axial: 80 W, SR6 interface
  • MHF-22 air-oil: 160 W
  • MHF-22 grease: 60,000 rpm

MHT high torque spindles

MHT are motorized spindles with high torque synchronous motors for universal applications, from swiss-type turning to milling and grinding. Body diameters are 25, 30 and 45 mm, speeds 20,000 to 40,000 rpm. Tool interface ATC or ER collet, grease or air-oil lubrication.

  • MHT speed: 20,000–40,000 rpm
  • MHT-25: 340 W, 30,000 rpm
  • MHT-30: 615 W, 28,000 rpm
  • MHT-30 ATC: ATC-E15/28 clamping

MDS dressing spindles

MDS are motorized spindles with synchronous motors for dressing, milling and grinding, or used as a part holder. Body diameters are 38, 45, 58, 72, 76 and 78 mm, speeds from 6,000 to 25,000 rpm, grease lubrication. AE sensors are available as an option.

  • MDS-38: 150 W, 25,000 rpm
  • MDS-45: 400 W, 20,000 rpm
  • MDS-58: 580 W, 25,000 rpm
  • MDS option: AE sensors

MGS-60 grinding spindle

The MGS range covers motorized spindles with synchronous motors dedicated to grinding. MGS-60 has a Ø60 mm body, HSK-C40 tool interface, radial coupling and grease lubrication. MGS-60 power is 2800 W at 12,000 rpm.

  • MGS-60 body: Ø60 mm
  • MGS-60 power: 2800 W
  • MGS-60 speed: 12,000 rpm
  • MGS-60 interface: HSK-C40

MBC belt driven spindles

MBC belt driven spindles transmit large torques in small sizes for grinding, milling or as a part holder. Diameters 20 to 60 mm, grease or oil lubrication. Plain bearings give rigidity at slow speed, ball bearings serve higher speeds. On request: automatic tool change, coolant through the centre.

  • MBC-20: oil lubrication, 3,000 rpm
  • MBC-40: HSK-D32, 8,000 rpm
  • MBC-60: HSK-C32, 16,000 rpm
  • Option: automatic tool change

MHF-45 and MHT-45 spindles

The Ø45 mm range follows the principles of MHF/MHT-30: high frequency (MHF-45) or high torque (MHT-45) motor, ER16 or HSK-E20 interface. HSK-E20 allows automatic tool change; a sensor monitors tool grip via a signal conversion box. Option: high pressure coolant through the centre (IKZ).

  • MHF-45 and MHT-45 body: Ø45 mm
  • Interface: ER16 or HSK-E20
  • HSK-E20 tool grip sensor
  • Option: through-centre coolant (IKZ)

Choosing a Meyrat spindle

Meyrat SA is a Swiss spindle manufacturer based in Biel-Bienne. The company was founded in 1947 as Meyrat Frères by Raymond and Pierre Meyrat. Meyrat SA develops and manufactures standard and custom spindles for small to medium sized machines.

Meyrat customers work in the automobile, aeronautical, dental, electronics, tooling, medical and watchmaking fields. In 2014 the company enlarged its premises, increasing production and storage capacity.

Motorized and belt driven spindle ranges

Motorized spindles: MHF high frequency, Ø16–80 mm, 40,000–80,000 rpm; MHT high torque, Ø25, 30 and 45 mm, 20,000–40,000 rpm; MDS for dressing, Ø38–78 mm, 6,000–25,000 rpm; MGS-60 for grinding, 12,000 rpm. MBC belt driven spindles with diameters of 20–60 mm run from 1,000 to 20,000 rpm.

The ATC-E15 clamping system enabled compact spindles from Ø30 mm, such as MHT-30 ATC. The Ø45 mm spindles take an ER16 interface or an HSK-E20 interface that allows automatic tool change; through-centre coolant (IKZ) is an option. MDS dressing spindles in Ø76 and Ø78 mm appeared in 2021.

SpinCare service by the manufacturer

The SpinCare manufacturer service covers assistance, exchange and repair of Meyrat spindles. Repair Level 1 is a basic repair defined for each spindle model; Level 2 is a personalized repair with analysis and a quote for the customer needs.

In Switzerland the manufacturer delivers a repaired spindle within 20 working days, a reconditioned exchange spindle within 2 working days after the order, and an on-site intervention within 3 working days. Assistance covers MHF, MHT and MDS motorized spindles and accessories.

Meyrat and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Meyrat and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.