VIBRA Maschinenfabrik Schultheis / VIBRA Schultheis Vibration & Fluid-Bed Equipment
Vibrating trough and tube conveyors (FRU/FRO), natural-frequency systems (RRU/RRO up to 70 m), WF/WFT spiral elevators, SR/RS/SRK screening machines, VF/VR/VSK/dVW fluid-bed dryers and coolers, and DV/MX/ER drives by VIBRA Maschinenfabrik Schultheis / VIBRA Schultheis.
Vibrating Trough & Tube Conveyors (FRU, FRO)
Open FRU troughs and closed FRO tubes run as freely vibrating conveyors up to 8 m. Hygienic Design executions feature bolted or quick-fastener covers. Replaceable spares include DV motors, MX/ER drives, elastic supports, flat gaskets and profile seals.
- Series: FRU open troughs and FRO closed tube conveyors
- Conveying length: freely vibrating units up to ~8 m
- Execution: Hygienic Design with flat or removable profile seals
- Parts: DV/MX drives, elastic springs, cover clamps, gaskets
Natural-Frequency Trough & Tube Conveyors (RRU, RRO)
Two-mass natural-frequency RRU trough and RRO tube conveyors cover single-unit distances of 40 to 70 m and up to 100 t/h with twin vibrating motor or eccentric drives. Spares cover reactor springs, isolation mounts, eccentric bearings and seals.
- Series: RRU trough and RRO dust-tight tubular conveyors
- Capacity: 40–70 m single-unit distance, up to 100 t/h
- Drive: vibration-isolated two-mass frame with twin DV or eccentrics
- Parts: reactor spring packs, isolators, drive bearings, sleeves
Spiral Elevators, Stick-Slip & Dischargers (WF, WFT, LFU, SX)
WF spiral conveyors lift bulk solids up to 7 m on a compact footprint, while WFT versions add heat exchanger decks for cooling, heating or drying. LFU stick-slip units and SX bin dischargers handle delicate foods and powders. Spares: DV drives, mounts, seals.
- Series: WF / WFT spiral conveyors, LFU stick-slip, SX dischargers
- Functions: up to 7 m lift plus thermal exchange on WFT decks
- Enclosure: dust-tight and gas-tight housings on small footprint
- Parts: vibrating motors, elastic mountings, bellows, deck gaskets
Horizontal, Round & Dewatering Screens (SR, RS, ESR)
SR horizontal screens offer 1 to 3 decks, low headroom and manual or pneumatic screen tensioning via twin vibrating motors. RS stainless round screens meet ATEX dust zones 21/22 and gas zones 1/2, alongside ESR dewatering machines. Spares: screens, tensioners, seals.
- Series: SR (1–3 decks), RS round stainless screens, ESR dewatering
- Tensioning: manual or pneumatic quick screen clamping
- Hazardous zones: RS rated for dust zones 21/22 and gas 1/2
- Parts: mesh decks, pneumatic tensioners, gaskets, twin DV drives
Pellet Oversize & Low-Frequency Screens (SRK, PSR, SRF, G, KS)
SRK oversize separators classify plastic pellets at 1000 to 40000 kg/h using double-deck seamless perforated screens and quick-release clamps. KS/SLU protective screens, universal G units and SRF/PSR gyratory screeners complete the line. Spares: decks, clamps, bearings.
- Series: SRK pellet separators, KS/SLU protective, G, SRF & PSR
- Throughput: SRK handles 1000–40000 kg/h with dual decks
- Design: seamless perforated screens prevent material carryover
- Parts: perforated screens, quick clamps, eccentric bearings, mounts
Fluid-Bed Dryers & Coolers (VF, VR, VSK, dVW, SF)
VF freely vibrating units (up to 10 m2) and VR two-mass units (up to 40 m2) dry and cool pellets, milk powder, coffee, sugar and salt without clustering, alongside VSK screen coolers and dVW batch dryers. SF static units handle free-flowing solids. Spares: fluidization plates, seals.
- Series: VF (to 10 m2), VR (to 40 m2), VSK screen cooler, dVW, SF
- Batch dVW: round fluidization plates from 250 to 1750 mm diameter
- Plates: VIBRAFLOW and Conidur air distribution decks for even flow
- Parts: distributor decks, high-temp gaskets, screen inserts, drives
Rotary Unbalance Vibrating Motors (DV Series)
DV vibrating motors carry eccentric weights on both shaft ends to generate gyratory motion, while two counter-rotating units produce directed vibration on troughs and screens. CNC-machined housings are selected by speed and centrifugal force. Spares: full DV units, weights, bearings.
- Series: DV rotary unbalance motors for conveyors and screeners
- Operation: single-motor gyratory or counter-rotating linear drive
- Selection: sized by rotational speed and required centrifugal force
- Parts: replacement DV motors, eccentric weight kits, end covers, bearings
Electromagnetic Vibrators & Tables (MX, ER, ERF, HVL, VTG)
MX drives (MX 400, 1200, 2000, 3000; 40–145 kg) stop immediately at switch-off and adjust via thyristor controllers on ductile iron bases. Compact ER (50/60 Hz) and ERF (25–30 Hz) serve 3–100 kg loads alongside HVL/KV/EV units and VTG tables. Spares: coils, leaf springs, controllers.
- MX range: MX 400, MX 1200, MX 2000, MX 3000 (40–145 kg weight)
- ER & ERF range: 5 sizes for 3–100 kg net load (50/60 and 25–30 Hz)
- Control: instant stop with thyristor feed controllers and Hygienic option
- Parts: magnet coils, elastic leaf springs, armatures, HVL & VTG units
German Vibration & Fluid-Bed Engineering (VIBRA Maschinenfabrik Schultheis / VIBRA Schultheis)
Founded in 1948 in Offenbach am Main with a heavy machinery plant in Utzberg/Weimar and a Shanghai subsidiary operating since 2013, VIBRA MASCHINENFABRIK SCHULTHEIS GmbH & Co.
supplies bulk material handling and thermal processing equipment to chemical, food, pharmaceutical and plastics plants in over 80 countries.
Dedicated pilot test facilities verify material fluidization, moisture removal, screening efficiency and trough flow behavior on customer samples before full-scale fabrication.
Conveying Systems: FRU/FRO, Long-Distance RRU/RRO & Spiral WF/WFT
Freely vibrating FRU open troughs and FRO closed tube conveyors cover spans up to 8 m with Hygienic Design options, bolted or quick-fastener covers and removable profile gaskets.
For long lines from 40 to 70 m at capacities up to 100 t/h, vibration-isolated two-mass RRU and RRO natural-frequency conveyors operate with twin DV motors or eccentric drives.
Vertical lifting up to 7 m is handled by WF spiral conveyors, while WFT heat-exchanger decks combine vertical transport with cooling, heating, drying or humidification. Fragile products move gently on LFU stick-slip units, complemented by SX bin dischargers.
Screening Machines (SR, RS, ESR, SRK, PSR) & Fluid-Bed Units (VF, VR, VSK, dVW)
SR horizontal screeners (1–3 decks, low headroom, manual or pneumatic tensioning), stainless steel RS round screeners rated for ATEX dust zones 21/22 and gas zones 1/2, ESR dewatering screens and SRK pellet oversize separators (1000–40000 kg/h, double-deck) cover classification and protective screening.
For thermal processing of powders and pellets with poor flowability, VF freely vibrating fluid-bed dryers/coolers reach approx. 10 m2 exchange area, VR two-mass systems reach 40 m2, VSK integrates cooling with screening, and dVW batch units provide 250–1750 mm plate diameters.
Drive Technology (DV, MX, ER/ERF) & Equipment Selection Parameters
Active vibration is generated by CNC-built DV rotary unbalance motors for gyratory or counter-rotating linear motion, or by electromagnetic vibrators MX (400/1200/2000/3000, 40–145 kg), ER (50/60 Hz) and ERF (25–30 Hz, 3–100 kg net load) offering instant stop and thyristor feed control.
To size a conveyor, screener or fluid-bed unit, provide bulk density, particle size distribution, throughput (kg/h or t/h), conveying distance or moisture targets, and hygienic or ATEX requirements.
VIBRA Maschinenfabrik Schultheis / VIBRA Schultheis and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of VIBRA Maschinenfabrik Schultheis / VIBRA Schultheis and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for VIBROS
- Equipment and parts for WMTCNC Industrial
- Equipment and parts for VIGO Photonics / VIGO System
- Equipment and parts for Escomatic / ESCO SA
Documents and sources
- About Us (VIBRA Maschinenfabrik Schultheis GmbH & Co.)
- Shanghai Subsidiary Profile (Vibra Vibration Technology Shanghai Co., Ltd.)
- Vibrating Trough & Tube Conveyors (FRU / FRO)
- Natural-Frequency Trough and Tube Conveyors (RRU / RRO)
- RRO Two-Mass Long-Distance Tubular Vibrating Conveyor Specs
- Spiral Conveyors WF and WFT Series
- SR Horizontal Screening Machines
- RS Round Screening Machines (Stainless Steel / ATEX)
- SRK Plastic Pellet Oversize Separator Specifications
- Vibrating Fluid-Bed Dryers and Coolers (VF / VR)
- DV Vibrating Motors (Technical Overview)
- MX Electromagnetic Vibrators & Dimensions
- ER and ERF Electromagnetic Vibrators (50/60 Hz and 25–30 Hz)
- Russian Portal of VIBRA MASCHINENFABRIK SCHULTHEIS GmbH & Co.
