VIBRA FRANCE Industrial Vibrators & Concrete Vibration Equipment
French-engineered industrial and concrete vibration machinery from VIBRA FRANCE SAS (Lyon): EA/EA-X, EBB/EBST, EAM, VBM, and EACC electric vibrators; VT, VR, VK, VPA, and VPP pneumatic vibrators; AET, TNE, PEA, and EBA HF needles; CE/CT frequency converters; TV/TG tables and BET feeders.
EA / EA-X Three-Phase and EBB / EBST Flange Vibrators
EA and EA-X (ATEX) three-phase electric vibrators run on 400 V 50 Hz at 750 to 3,000 rpm and up to 10 kN centrifugal force. Flange EBB and EBST series add side or center flanges with IP65-7 rating. Service parts: NiCrMo shafts, Klüber bearings, weights, covers.
- EA7501-EA3010-X, up to 10 kN, 400 V 50 Hz
- EBB / EBST side or center flange mounting
- ATEX zone 22/2 (EA-X) and CSA / UL
- IP65-7 housing, NiCrMo shaft, Klüber grease
EAM Single-Phase, VBM Micro-Vibrators, and EACC DC Units
EAM single-phase vibrators (EAM1450-EAM3003) run on 220-230 V 50 Hz with a remote capacitor, delivering 1,500-3,000 rpm and up to 3 kN. Compact VBM units (VBM2M, VBP2T) run at 3,000/3,600 rpm; EACC covers DC power. Parts: capacitors, cables, bearings.
- EAM1450-EAM3003: 220-230 V, up to 3 kN
- VBM2M / VBP2T: 3,000 / 3,600 rpm compact
- Class F insulation and IP65-7 rating
- EACC direct-current industrial series
VT Turbine, VR Roller, and VK / BG Ball Pneumatic Vibrators
VT pneumatic turbine vibrators (VT7-VT50) run on 2-6 bar oil-free dry air up to 41,000 / min and 8,610 N below 70 dB(A). The rotary range includes VR roller and VK / BG ball models for hoppers. VT features anodized aluminum body and ATEX option. Parts: silencers, flanges, bearings.
- VT7-VT50: up to 41,000 / min and 8,610 N
- 2-6 bar oil-free dry air, under 70 dB(A)
- ATEX Ex II 2G c T6 option, aluminum body
- VR roller and VK / BG rotary ball models
VPA Silent Piston and VPP Impact Piston Linear Vibrators
VPA silent piston vibrators (VPA15-VPA90) deliver linear vibration at 2-6 bar and 70-76 dB(A). VPP striker hammers (VPP30-VPP75) include a built-in lubricator for silo bridging. Both work from -20°C to +100°C on ≤ 5 µm filtered air. Parts: ground steel pistons, silencers.
- VPA15-VPA90: air cushion, 70-76 dB(A)
- VPP30 / VPP45 / VPP75 striker hammer
- 2-6 bar, ≤ 5 µm filtered air, -20 to +100°C
- Iron body with hardened ground steel piston
AET / TNE / PEA / EBA HF Concrete Needles and Rabbit Units
AET, TNE, and PEA concrete needles run at 42 V, 200 Hz, 12,000 rpm with 5-15 m sheath and 10-25 m CEE cable. PEA adds dual thermal protection and tungsten tubes, while EBA integrates a 230 V converter; Rabbit and AIR complete the line. Parts: steel/Vulkollan tips, bearings, switches.
- AET / TNE / PEA: 42 V, 200 Hz, 12,000 rpm
- Sheath 5-15 m, CEE cable 10-25 m
- PEA dual thermal protection, tungsten tube
- EBA 230 V integrated, Rabbit and AIR needles
CE Electronic and CT Electromechanical Frequency Converters
Single-phase electronic converters CE28MM, CE20M, and CE30M (plus CE11M, CE40M, CE40MC) convert 230 V to 42 V / 200 Hz for concrete needles. Three-phase electronic and CT rotary units serve 400 V sites alongside 42 / 400 V external vibrators. Parts: modules, axial fans, CEE sockets.
- CE20M / CE30M / CE28MM: 230 V to 42 V 200 Hz
- Three-phase electronic and CT 400 V units
- Overload, phase-loss, and earth-leak protection
- CE28MM static module without wear parts
TV / TG Vibrating Tables, BET Feeders, and Vibrating Screeds
Custom TV1-TV5 and gabion TG3 / TG5 vibrating tables handle 40 kg to 40-ton loads at 380 / 230 V with 30-50 Hz inverters. BET electromagnetic feeders (12/50-25/76) dose 2-9 t/h at 50/100 Hz with 4-20 mA control, joined by screeds. Parts: silentblocs, fiberglass springs, coils.
- TV1-TV5 and TG3 / TG5: 40 kg to 40-ton load
- 380 V / 230 V 50 Hz, 30-50 Hz frequency drive
- BET feeders: 2-9 t/h, 50/100 Hz, 4-20 mA
- Silentblocs, fiberglass springs, steel troughs
VTC Vacuum Clamps, Cradle Lug Brackets, and 10 ml Oil Pods
VTC15D and VTC20D vacuum clamps attach VT or VPA pneumatic vibrators to smooth vessels from Ø 650 mm using a safety sling. The accessories line adds cradle lug brackets for fixed mounting and 10 ml pneumatic oil pods (100-pod packs) against icing. Consumables: suction pads, valves, pods.
- VTC15D / VTC20D vacuum mounts from Ø 650 mm
- Safety sling and quick air-suction valve
- Cradle lug brackets for vibrator mounting
- 10 ml pneumatic oil pods (100 / 12x100 packs)
Selecting VIBRA FRANCE vibration equipment across industry and construction
For industrial hoppers, screens, and conveyors, VIBRA FRANCE produces EA and EA-X three-phase vibrators (400 V 50 Hz, 750 to 3,000 rpm, up to 10 kN, ATEX zone 22/2), EBB and EBST flange-mounted motors, EAM single-phase models (220-230 V, up to 3 kN), VBM micro-vibrators, and EACC DC units.
Pneumatic lines span VT turbines (up to 41,000 / min on dry oil-free air), VR rollers, VK / BG ball models, VPA silent pistons, and VPP impact hammers.
For precast plants and construction sites, the catalog covers AET, TNE, and PEA high-frequency internal needles (42 V, 200 Hz, 12,000 rpm), EBA integrated-converter needles (230 V), Rabbit mechanical shafts, and AIR pneumatic needles, powered by CE20M / CE30M / CE28MM single-phase and CT three-phase converters.
Custom vibrating tables, electromagnetic feeders, and mounting hardware
Custom TV (TV1-TV5) and gabion TG (TG3, TG5) vibrating tables handle loads from 40 kg to 40-ton pre-slab benches with 30-50 Hz inverter control and silentbloc isolation.
BET electromagnetic feeders (12/50, 15/30, 15/70, 25/76) deliver 2 to 9 tons/h at 50 or 100 Hz with stainless or standard troughs and 4-20 mA / 0-10 V automation.
VTC15D and VTC20D vacuum suction clamps with safety slings mount VT or VPA pneumatic vibrators on containers from 650 mm diameter without welding, alongside cradle lug brackets and 10 ml pneumatic tool oil pods.
VIBRA FRANCE and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of VIBRA FRANCE and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Vibrowest Italiana
- Equipment and parts for VIBROTECH
- Equipment and parts for VIBRA Maschinenfabrik Schultheis / VIBRA Schultheis
- Equipment and parts for VIBROS
Documents and sources
- About VIBRA FRANCE SAS (Lyon, founded 1985)
- VIBRA FRANCE complete equipment catalog (30 lines)
- EA and EA-X three-phase industrial vibrators (ATEX)
- EBB and EBST flange-mounted industrial vibrators
- EAM series single-phase industrial vibrators
- VBM series compact micro-vibrators (VBM2M, VBP2T)
- VT series pneumatic turbine vibrators
- VPA series silent pneumatic piston vibrators
- VPP series impact striker-piston vibrators
- High-frequency concrete vibrating needles AET / TNE / PEA
- Single-phase electronic frequency converters CE20M / CE30M / CE28MM
- Custom vibrating tables TV and TG (40 kg to 40 tons)
- BET series electromagnetic vibrating feeders (2-9 t/h)
- VTC15D and VTC20D vacuum quick-attach clamps
- 10 ml pneumatic tool oil pods
