Escomatic (ESCO SA) automatic lathes
Technical selection of Escomatic (ESCO SA, Switzerland) automatic lathes: D2, D5, D3-D6, D5-D6 ULTRA, D5-D6 TWIN, NM6 FLEXI, NM6 TWIN and NM8 FLEXI, tooling and collets.
D2 and D5 automatic lathes
The D2 is a CNC lathe for simple, precise parts of 0.3 to 4 mm, turned with two cutting tools. The D5 keeps the D2 base, straightening, feed and rotating work head and replaces the counter collet with a front take-up system: a 2-axis cross table, 2 drilling spindles and a threading spindle.
- D2 and D5: Ø0.3–4 mm
- D2/D5 head: up to 12,000 rpm
- D2: 2 cutting tools
- D5 take-up table: 2 axes
D3-D6 automatic lathes
The D3-D6 automatic lathes carry three cutting tools on the rotating work head and machine coil material. The guide bush can be an ESCO part or a standard commercially available one. The maker lists a small footprint and low power consumption; coil material supports work 24 hours a day.
- D3-D6: 3 cutting tools
- ESCO or standard guide bush
- 24-hour work from coil
- Low power consumption
D5-D6 ULTRA automatic lathes
The D5-D6 ULTRA head turns at 12,000 rpm; on the D6 ULTRA it holds three independently controlled tools. The DUF front unit has three axial spindles for drilling and tapping; the C-axis sub-spindle and DUF sit on tables with separate CNC axes at 40 m/min. DUAL rework spindles run at 18,000 rpm.
- D5-D6 ULTRA head: up to 12,000 rpm
- DUAL spindles: 18,000 rpm
- Table axes: 40 m/min
- DUF: 3 axial spindles
D5-D6 TWIN automatic lathes
The D5-D6 TWIN tool head turns at 12,000 rpm with two or three cutting tools. The cut part is machined on two counter-operations at once: two counter-spindles sit on a cross table with two CNC axes at up to 40 m/min. In DUAL mode three axial spindles and one transverse spindle run at 18,000 rpm.
- D5-D6 TWIN head: 12,000 rpm
- Material Ø0.3–4 mm
- 2 counter-spindles
- DUAL spindles: 18,000 rpm
NM6 FLEXI automatic lathe
The NM6 FLEXI develops the New Mach 64x range: four turning tools on the head, plus C and Y axes. Two independent front and rear rework tables carry measurement scales for positioning accuracy. The straightener has an electric drive set from the operator panel; the control is FANUC 0i-TF.
- NM6 FLEXI: 4 turning tools
- C and Y axes
- 2 independent rework tables
- FANUC 0i-TF control
NM6 TWIN automatic lathe
The NM6 TWIN has four turning tools on the head and two identical rework stations. They comprise two C-axis counter-spindles on independent cross tables, two units with 4 fixed axial tool holders or 4 axial spindles, and a vertical unit with 2 spindles. The machine works on 3 parts at a time.
- NM6 TWIN: 4 turning tools
- 2 C-axis counter-spindles
- 3 parts at a time
- Vertical unit: 2 spindles
NM8 FLEXI automatic lathe
The NM8 FLEXI follows the NM6 FLEXI concept with a new work head for a material passage of up to 8 mm. Two CNC axes control the turning tools, so two tools cut at once. Coil material up to 8 mm passes a rotary straightening unit, which can be removed to fit a standard bar feeder.
- NM8 FLEXI: up to 8 mm
- 2 tools at once
- Straightening up to 8 mm
- Bar feeder instead of straightener
Escomatic machine tooling
The Tools Services division of the ESCO group assembles machine tooling under a single order. The maker lists guide bushes, standard or profiled counter collets, standard and form tools, straightening keys, feed and fixed collets, feed discs, drill bits, taps and milling cutters.
- Guide bushes
- Feed and fixed collets
- Straightening keys
- Feed discs
Choosing an Escomatic automatic lathe
ESCO SA is a Swiss machine tool manufacturer. Since 1950 it has designed and built escomatic automatic and CNC lathes for small-diameter parts from 0.3 to 8 mm, made from coil or bar stock. The company is present in more than 20 countries through a network of agents and distributors.
In an escomatic lathe the material does not rotate: the work head with the cutting tools rotates around it. ESCO serves micromechanics, electronics, automotive, medical and dental production and machines stainless steels, titanium and cobalt-chromium.
D range and NM range
D range: the D2 and D5 for material from 0.3 to 4 mm, the D3-D6 with three cutting tools, the D5-D6 ULTRA and D5-D6 TWIN with a 12,000 rpm tool head, 18,000 rpm rework spindles and Pegasus/Beckhoff CNC.
NM range, four turning tools on the head: the NM6 FLEXI with two independent front and rear rework tables and C and Y axes, the NM6 TWIN with two counter-spindles machining 3 parts at a time, and the NM8 FLEXI with a material passage of up to 8 mm and two tools cutting at once.
The NM6 FLEXI and NM8 FLEXI use FANUC 0i-TF control.
Tooling and machine overhaul
The Tools Services division of the ESCO group assembles tooling under a single order: guide bushes, counter collets, cutting tools, straightening keys, feed and fixed collets, feed discs, drill bits, taps and milling cutters.
ESCO carries out machine overhauls at its plant within 12 to 16 weeks. Older D2 machines can be upgraded to D2 CNC-UP or D2 FLEX-UP: dismantling, parts inspection and overhaul of the straightener, feed, work head with its headstock and counter collet.
Escomatic / ESCO SA and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Escomatic / ESCO SA and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Willemin-Macodel
- Equipment and parts for Tsugami
- Equipment and parts for INDEX Werke / INDEX Traub
Documents and sources
- escomatic by ESCO SA — home page
- Products — D and NM ranges
- D2-D5 lathes — specifications
- D3-D6 lathes — specifications
- D5-D6 ULTRA lathes — specifications
- D5-D6 TWIN lathes — specifications
- NM6 FLEXI lathe — specifications
- NM6 TWIN lathe — specifications
- NM8 FLEXI lathe — specifications
- Services — machine overhaul and tooling
- Applications — business sectors
- Contact — ESCO SA, Switzerland
