Industrial Vibrating Equipment & Drives VIBROS (VIBROS s.r.o.)

Czech-engineered surface vibrators AO, AA, FO, SO24/SO34, screening machines ALFA/BETA/GAMA/OMEGA, vibrating feeders, conveyors and foundry shakeouts by VIBROS (VIBROS s.r.o.).

Surface vibrators AO, AA, FO

Produced since 2017 with IE3 Siemens built-in motors, VIBROS (VIBROS s.r.o.) AO and AA drives succeed NO and NA units. AO uses a single-piece body while AA features a two-part housing; FO runs up to 6000 rpm via VFD. Serviceable items cover sealed bearings, eccentric weights, and cover seals.

  • Speeds: 750–6000 rpm (12–100 Hz)
  • Siemens IE3 motor, IP 65 enclosure
  • Thermal class F, 3×400 V AC
  • Mechanically matches NO and NA

Flange-mounted vibrators SO24, SO34

VIBROS (VIBROS s.r.o.) SO vertical center vibrators drive circular screening machines via flange mounting. Models SO24 and SO34 operate at 24 Hz (1500 rpm) with IP 65 protection, class F insulation, and Siemens motors. Replaceable parts include sealed bearings, flange bolts, and weight covers.

  • SO24: 4730 N, 191 kg·mm, 0.37 kW, 27 kg
  • SO34: 10110 N, 402 kg·mm, 0.75 kW, 55 kg
  • Flanges: 6ר14 M12 / 6ר16 M14
  • 3×400 V or 3×500 V, 1500 rpm

MICRO series, NA66 Ex and BSB brake

VIBROS (VIBROS s.r.o.) also delivers MICRO miniature vibrators, special explosive-atmosphere unit NA66, and BSB DC braking rectifiers. The BSB unit stops super-resonant machines within seconds to avoid resonance peak amplitudes. Service items cover BSB modules, PTC thermistors, and terminal blocks.

  • MICRO drives for compact feeders
  • Special NA66 for hazardous zones
  • BSB DC braking unit eliminates coast-down
  • Optional winding PTC thermistors

ALFA and BETA screening machines

VIBROS (VIBROS s.r.o.) ALFA and BETA classifiers handle sizing, dewatering, and grading of bulk solids. ALFA uses a central exciter for circular motion, while BETA employs a single vibrator for elliptical throw. Wear items include screen decks, springs, and bearings.

  • ALFA: circular motion, central exciter
  • BETA: elliptical throw, single drive
  • Frame: carbon steel or stainless steel
  • Replaceable screen meshes and springs

GAMA, DELTA, OMEGA and LT screens

Linear VIBROS screens GAMA and DELTA are driven by dual counter-rotating vibrators underneath or on the sides, whereas OMEGA units target fine powders. Square-cassette LT classifiers perform lab sieve analysis. Spare components include Trellex seals, quick-release covers, and sieve cassettes.

  • GAMA & DELTA: linear dual-motor motion
  • OMEGA: spatial motion for fine powders
  • LT laboratory square-cassette screens
  • Trellex dust-tight inlet and outlet seals

Feeders PVA/PVM and conveyors ZVA/TVA

VIBROS feeders PVA, PVB, PVC and electromagnetic PVM/PVVM dose bulk solids and act as bunker shutoffs at rest. Trough units ZVA/ZVB, tubular conveyors TVA/TVB/TVL up to 6 m, and vertical elevators DVZA/DVZB up to 6 m handle dust-tight transfer. Liners come in Hardox 450, AISI 304/316, and Solidur.

  • Conveyors and feeders up to 6 m length
  • DVZA/DVZB vertical lift up to 6 m height
  • Wear liners: Hardox 450, AISI, Solidur
  • Electromagnetic dosing: PVM and PVVM

Foundry shakeouts VVRP, VVRS and VM mills

For foundry lines, VIBROS (VIBROS s.r.o.) builds stationary knockout grates VVRP, continuous-travel shakeouts VVRS, lump crushers VM, and pneumatic rammers VP. Units resist thermal shock and abrasive molding sand in heavy-duty duty cycles. Spare grates, springs, and drive brackets are available.

  • VVRP: stationary foundry shakeout grates
  • VVRS: continuous-motion knockout grids
  • VM: vibratory mills for sand lump crushing
  • VP: manual rammers for foundry molds

Tables VS, fluidizers VFD/VFC and VA

VIBROS VS tables compact paving blocks, shake big-bags, and integrate into roller lines. Vibrofluidizers VFD and VFC dry and cool powders in food, chemical, and foundry plants, while VA bin activators aid discharge. Spares include air bellows, springs, and rubber mounts.

  • VS tables for concrete, big-bags, roller lines
  • VFD/VFC vibrofluid dryers and coolers
  • VA vibrating bottoms and VZ round hoppers
  • Mounts: steel springs, rubber, air bellows

VIBROS (VIBROS s.r.o.) engineering and custom sizing

VIBROS s.r.o. engineers tailor-made industrial vibrating machines and IE3 surface vibrator drives (AO, AA, FO, SO24, SO34, MICRO) with IP65 protection, Class F insulation, Siemens built-in motors, and DC braking units BSB for foundries, mining, chemical, and food lines.

Machines are built to required dimensions in Inventor/AutoCAD with FEM structural checks using carbon steel or AISI 304/316 stainless steel, supported by empirical and laboratory screening/conveying tests on 10-liter material samples.

Excitation systems, wear liners and dust sealing

Drives range from AO/AA/FO surface vibrators and SO center vibrators to foreign electromagnetic exciters for precision dosing and geared mechanical exciters on heavy screens.

Chutes and decks can be lined with Hardox 450, stainless steel, or UHMWPE Solidur, and sealed against dust using Trellex sleeves, bolted lids, and BSB DC braking units to suppress coast-down resonance.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.