Louis Belet micro end mills, hobs, micro drills and thread tools

Swiss carbide and PCD tools from Louis Belet: micro end mills, EXPERT end mills, Origin hobs, micro drills, thread mills and slitting saws. Selection by REF code and a quotation for your project.

Micro end mills and small-diameter end mills

Louis Belet started as an end mill workshop. REF. 1210 and REF. 102 are two-tooth micro end mills, while REF. 1430 and REF. 1450 serve deep machining. The four-tooth REF. M3520 is made for micro machining centres.

  • REF. 1210 micro end mill: 2 teeth
  • Deep machining: REF. 1430, 1450
  • Four teeth: REF. M3520
  • Finishing end mill REF. 104-0 Z3

EXPERT end mills by workpiece material

The EXPERT line is split by workpiece material: REF. 3100 for titanium, the four-tooth REF. 1620 for stainless steel, REF. 3200 for aluminium, REF. 1820 for brass and REF. 9020 for composites. The toric REF. 3310 cuts steel up to 65 HRC. REF. 1620H has internal coolant.

  • Titanium: REF. 3100
  • Stainless steel: REF. 1620 Z4
  • Steel up to 65 HRC: REF. 3310
  • Internal coolant: REF. 1620H

Micro drills, centre drills and a watchmaker reamer

Micro twist drills REF. 339 and REF. 340 come with 24° and 34° helix, and the REF. 353 drill has three flutes and a Ø3 shank. NC centre drills REF. 337 cover 90°, 120° and 60°. Stainless steel takes the EXPERT REF. 370, and REF. 361 is a reamer for watchmakers.

  • Helix 24°: REF. 339
  • Helix 34°: REF. 340
  • NC centring: 60°, 90°, 120°
  • Reamer REF. 361

Origin hobs and gear cutting tools

Origin hobs for epicyclic and involute teeth cover standard modules 0.015–1.000. The shank version covers modules 0.015–0.800, hob diameter from 3 mm, 6 mm shank. The 8100 hob to ISO53 / DIN867, quality AAAA, covers modules 0.05–1.00, and the 8700 cutter is for power skiving of internal teeth.

  • Origin: modules 0.015–1.000
  • Origin on shank: from Ø 3 mm
  • 8100 hob: quality AAAA
  • 8700: internal power skiving

Thread mills and whirling tools

The REF. 5200 thread mill and the helical REF. 5300 cut the ISO 60° profile. For thread whirling the range includes the one-tooth REF. 5500 and three-tooth REF. 5600, the REF. 5000 cutter and the double profile REF. 5700. PCD versions are the REF. 45600 whirling tool and the REF. 45200 thread mill.

  • ISO 60° profile: REF. 5200
  • Whirling tools: Z1 and Z3
  • Double profile: REF. 5700
  • PCD version: REF. 45600

PCD diamond tools: mills and drills

Louis Belet runs laser grinding machines for PCD tools. The range includes REF. 4010 end mills, the REF. 4100 T-slot cutter, REF. 41510 and REF. 41520 micro helical mills, the two-tooth REF. 4500 drill and the REF. 4580 micro drill. PCD is also used in the REF. 45600 and REF. 45200 thread tools.

  • Laser-ground PCD
  • Micro mills: REF. 41510, 41520
  • REF. 4500 drill: 2 teeth
  • REF. 4580 micro drill

Slitting saws, angle and radius cutters

REF. 223 slitting saws follow DIN 1838 with coarse pitch, REF. 223-1 follows DIN 1837 with fine pitch, and REF. 226 has staggered teeth. REF. 228 angle cutters come in 60° and 45°, REF. 229 biconical cutters in 60°, 90° and 120°. Radii are cut by the convex REF. 232 and concave REF. 234.

  • Slitting saws: DIN 1838, DIN 1837
  • Angle cutters: 45° and 60°
  • Biconical: 60°, 90°, 120°
  • Radius cutters: REF. 232, 234

Tools for brass bottom plates and bridges

For brass bridges and bottom plates of watch movements Louis Belet makes tools with mirror finishing, so brass does not stick to them. Surfacing uses the REF 111-1 end mill, pockets the REF 1510–1540 mills, NIHS threads the REF 5500 whirling tool and engraving the REF 119-3 and 119-4.

  • Mirror finishing for brass
  • NIHS threads: REF 5500
  • Engraving: REF 119-3, 119-4
  • Ceramic for brass: REF.1820C01

How to choose a Louis Belet tool

Selection starts with the operation and the workpiece material.

For milling the range offers micro end mills and EXPERT end mills for titanium, stainless steel, aluminium, brass and composites; for holes micro drills, centre drills and a watchmaker reamer; for gears hobs; for threads thread mills and whirling tools; for slots and profiles slitting saws and angle cutters.

Louis Belet tools are used in watchmaking and jewellery production, medical technologies, aeronautics, telephony and electronics. A separate range with mirror-finished cutting edges serves brass bottom plates and bridges of watch movements.

Gear cutting: hobs and Z² cutters

Origin hobs cover standard modules 0.015–1.000, and 0.015–0.800 in the shank version. The 8100 hob to ISO53 / DIN867, quality AAAA, covers modules 0.05–1.00, and the 8700 cutter is for power skiving of internal teeth.

The Z² cutter cuts a gear tooth by tooth in modules 0.03–1.00 and suits prototypes and small series. E2F hobs for frontal gear cutting cover modules 0.05–0.50, and Trinity hobs for conical gears 0.05–0.30. Standard modules depend on the gearing norm; other modules are made on request.

Small holes and threads

Micro drills REF. 339 and REF. 340 differ in helix angle, 24° and 34°, and the REF. 353 drill has three flutes and a Ø3 shank. The H series with internal coolant includes the REF. 344H drill, the EXPERT REF. 374H for stainless steel, the REF. 337H centre drill and the REF. 1430H micro end mill.

Thread mills REF. 5200 and REF. 5300 cut the ISO 60° profile. The REF. 5500 whirling tool is used for NIHS threads on watch bottom plates, and PCD versions include the REF. 45600 whirling tool and the REF. 45200 thread mill.

The manufacturer

Louis Bélet SA was founded in 1948 by the watchmaker Louis Bélet as an end mill workshop; the plant is in Vendlincourt, Switzerland.

The production area there has reached 1700 m², and the machine park includes 6-axis CAM tool grinders for tool diameters below 3 mm and laser grinding machines for PCD.

The manufacturer reconditions most tools, its own and those of other makers: end mills from Ø 6 mm, drills, circular cutters and PCD tools. Sizes and lead time are stated in the quotation for each project.

Louis Belet and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Louis Belet and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.