WME Power Systems Magnet Power Supplies & Power Electronics
Precision 4-quadrant magnet power supplies, pulsed & DC/DC accelerator units, custom multi-output modules, and 19-inch system electronics engineered by WME Power Systems GmbH (Hamburg, Germany).
PA2540, PA4008 & PA20100 — Linear 4-Quadrant Magnet Supplies
Linear 4-quadrant magnet supplies PA2540 (±40 A, ±25 V, water-cooled) and PA4008 (±8 A, ±40 V) hold < 100 ppm stability at up to 1000 Hz; PA20100 delivers 100 A at < ±10 ppm. Built for BESSY II and PTB storage rings. Spares cover DCCTs, control cards, and linear stages.
- PA2540: ±40 A / ±25 V, 19" 3U (40 kg)
- PA4008: ±8 A / ±40 V, air-cooled
- PA20100: up to 100 A / 20 V (< ±10 ppm)
- Dual DCCTs, DC–1000 Hz bandwidth
PA1025P, PP0512 & PP1006 — Pulsed & DC/DC Magnet Supplies
Pulsed unit PA1025P (0–250 A, 100 V, 1–100 ms, Ethernet/SCPI) and water-cooled step-down DC/DC supplies PP0512 (1100 A / 50 V, 4-phase) and PP1006 (600 A / 50 V, > 30 kW, > 97% efficiency) feed COSY, FAIR, and DESY PETRA III magnets. Spares cover DC/DC stages, DCCTs, and SCPI cards.
- PA1025P: 0–250 A / 100 V, 1–100 ms, SCPI
- PP0512: 1100 A / 50 V, 4-phase DC/DC
- PP1006: 1–600 A / 0–50 V, > 97% eff.
- 19" 8U rack (PP1006, 45 kg), water
LP120-800, NT3000, NT1200 & NT680 — Rack & Industrial Power Supplies
Lab supply LP120-800 outputs 20 kW continuous and 120 kW peak (100 ms) at 50–800 V DC; 3-phase NT3000 (0–60 V / 120 A / 3000 W) and NT1200 (0–60 V / 20 A) add 0–10 V monitoring and crowbar; NT680 (19"/2U) gives +68 V / 10 A. Spares include PFC boards, SMPS stages, and crowbar modules.
- LP120-800: 20 kW / 120 kWp, 50–800 V DC
- NT3000: 0–60 V / 120 A / 3000 W, crowbar
- NT1200: 0–60 V / 20 A, 0–10 V interface
- NT680: 19" 2U, +68 V / 10 A with PFC
NT177–NT770, YS Converter, DC241015 & AS34 — Custom Modules
NT177 (3U/10HP), NT230 (233 W), NT250/300L, and 3-phase NT720/750/770 power medical and industrial systems; YS Converter delivers 75,000 V isolation (300 V / 1000 W), DC241015 (16 W) feeds IGBTs, and AS34 fits airborne 360–800 Hz buses. Replacement modules and boards are available.
- YS Converter: 75,000 V isolation, 1000 W
- NT720/750/770: 3-phase, 7x +24 V / 2 A
- DC241015: IGBT driver +15/-10 V, 16 W
- AS34 (28 V DC), TN1225 & TN5416 (55 V)
DPS400 & DPS404A — Drive Power Supplies (Discontinued Series)
Discontinued DPS400 series units (40 V / 400 W) deliver up to 6x peak current for drive technology in a fanless wall-mounted metal housing. DPS400 includes a braking ballast resistor, whereas DPS404A integrates a 24 V / 0.4 A auxiliary supply. We support overhaul and direct-fit replacement.
- Output: 40 V DC / 400 W (up to 6x peak)
- DPS400: integrated motor braking resistor
- DPS404A: auxiliary 24 V / 0.4 A output
- Fanless wall-mounted metal enclosure
COLB, COLC, DIP-D/E, VS10 & HG1C04 — System Modules & Controllers
Controllers COLB, COLC, MDC01, FS-MDC-Z, CPX, and THST run CAN-bus circuits in medical and industrial X-ray systems. Processors DIP-D/DIP-E (19" 1U) and VS10 (3U/21HP, 100/120 Hz) filter video signals; HG1C04 (3U/21HP) outputs -400 to +20 V / -13 to +150 mA for tetrode grids.
- COLB / COLC / CPX: CAN-bus X-ray control
- DIP-D/E: 19" 1U, 50/60 Hz noise/edge filter
- VS10: 3U/21HP, 50/60 to 100/120 Hz, freeze
- HG1C04: 3U/21HP, -400…+20 V / -13…+150 mA
WME Power Systems GmbH Portfolio & Magnet Power Supply Selection
WME Power Systems GmbH (Hamburg, Germany, established in 1982) designs and manufactures precision magnet power supplies, linear and switched-mode power amplifiers, custom multi-output power modules, and 19-inch system electronics for accelerator laboratories, medical imaging, avionics, and industrial test stands.
Magnet supply series include water-cooled PA2540 (±40 A, ±25 V) and air-cooled PA4008 (±8 A, ±40 V) 4-quadrant linear amplifiers (< 100 ppm stability, DC–1000 Hz modulation), ultra-stable PA20100 (up to 100 A / 20 V, < ±10 ppm), pulsed PA1025P (0–250 A, 100 V, 1–100 ms, Ethernet/SCPI), and > 97% efficiency step-down DC/DC units PP0512 (1100 A / 50 V, 4-phase) and PP1006 (600 A / 50 V, 19" 8U).
Custom Industrial Supplies, High-Isolation Converters & X-Ray Control Modules
Industrial and test-stand configurations cover the 19-inch LP120-800 laboratory supply (20 kW continuous, 120 kW peak 100 ms, 50–800 V DC), 3-phase NT3000 (0–60 V / 120 A / 3000 W with crowbar) and NT1200 (0–60 V / 20 A, 0–10 V monitor), NT680 (19" 2U, +68 V / 10 A), multi-output medical modules NT177–NT770, YS Converter (75,000 V isolation, 300 V / 1000 W), and DC241015 IGBT driver converters.
System components include CAN-bus X-ray collimator controllers COLB, COLC, MDC01, FS-MDC-Z, central control CPX, safety table controller THST, digital image processors DIP-D/DIP-E and VS10, and tetrode grid driver HG1C04 (-400 to +20 V / -13 to +150 mA).
WME Power Systems and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WME Power Systems and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for WS Wärmeprozesstechnik
- Equipment and parts for Chuo Precision Industrial / Chuo Seiki
- Equipment and parts for Kohzu Precision
- Equipment and parts for WOTAN Technisches Büro
Documents and sources
- WME Power Systems GmbH official homepage (archived, EN) — Hamburg power electronics profile
- WME Power Systems About Us (archived, EN) — custom electronic assemblies since 1982
- WME Magnet Power Supplies catalog page (archived, EN) — PA and PP series overview
- WME PA2540 4-quadrant magnet power supply datasheet page (archived, EN)
- WME PA4008 4-quadrant magnet power supply datasheet page (archived, EN)
- WME PP1006 600 A water-cooled DC/DC magnet power supply page (archived, EN)
- WME Custom Power Supplies page (archived, EN) — LP120-800, NT series, YS Converter, AS34
- WME Power Supplies for Drives — discontinued DPS400 / DPS404A page (archived, EN)
- WME System Components page (archived, EN) — X-ray controllers, image processors, HG1C04
