WS Wärmeprozesstechnik (FLOX) Industrial Burners — Equipment & Spare Parts

FLOX® flameless oxidation burners across REKUMAT recuperative, REGEMAT regenerative, and LUVOMAT lines, plus SiSiC radiant tubes and CBFF-V2 / CBR burner control systems.

REKUMAT C & CS — Ceramic Recuperative Burners

REKUMAT C (10–100 kW) and CS (20–100 kW) burners operate at 700–1,250 °C using integrated SiSiC ceramic gap-flow heat exchangers. They serve strip and hardening furnaces with hydrogen readiness. Replaceable parts include SiSiC recuperators, flame tubes, nozzles, electrodes, and seals.

  • Capacity 10–100 / 20–100 kW
  • Temperature 700–1,250 °C
  • SiSiC ceramic heat exchanger
  • Hydrogen-capable FLOX®

REKUMAT M & S — Metallic Recuperative Burners

Metallic REKUMAT M (20–300 kW, 700–1,100 °C) and gap-flow REKUMAT S (10–140 kW, 700–950 °C) exceed 80% efficiency via triple heat-exchanger area. Built for galvanizing, annealing, and enameling lines. Spare parts cover metallic recuperators, burner heads, nozzles, and valve kits.

  • Capacity 20–300 / 10–140 kW
  • Temperature 700–1,100 °C
  • Efficiency > 80%, gap-flow
  • Galvanizing & annealing lines

REKUMAT S NT — Low-Temperature Burners (< 600 °C)

REKUMAT S NT burners (10–100 kW) provide direct firing in low-temperature industrial furnaces below 600 °C. Their patented gap-flow recuperator triples exchange surface area to reach 90% and higher efficiency. Service parts include recuperator inserts, electrodes, gas orifices, and gaskets.

  • Capacity 10–100 kW
  • Temperature < 600 °C
  • Efficiency 90% and higher
  • Direct low-temp heating

REKUMAT CR — Sub-Stoichiometric Recuperative Burners

REKUMAT CR burners (40–60 kW, 700–1,250 °C) integrate post-combustion in a ceramic FLOX® recuperator unit. They provide direct heating in sub-stoichiometric furnace atmospheres with Green Gas readiness. Spare parts include post-combustion sleeves, SiSiC blocks, lances, and sensors.

  • Capacity 40–60 kW
  • Temperature 700–1,250 °C
  • Sub-stoichiometric operation
  • Integrated post-combustion

REGEMAT 250 — Regenerative FLOX Burners (120–140 kW)

REGEMAT 250 regenerative FLOX® burners (120–140 kW, 800–1,000 °C) heat continuous galvanizing, annealing, strip, and hardening lines. Ultra-low NOx levels eliminate exhaust treatment, with Green Gas readiness. Spare parts cover regenerator beds, switching valves, seals, and igniters.

  • Capacity 120–140 kW
  • Temperature 800–1,000 °C
  • Regenerative FLOX® cycle
  • Galvanizing & strip lines

REGEMAT 350 — Self-Contained Regenerative Burners

REGEMAT 350 integrates all switching valves inside one housing (200 kW FLOX® + 200 kW boost, 850–1,250 °C), avoiding paired burner setups. Designed for forging, bogie hearth, and stainless annealing lines. Parts include valve blocks, regenerator beds, thermocouples, and seals.

  • 200 kW FLOX® + 200 kW boost
  • Temperature 850–1,250 °C
  • Single-unit valve switching
  • Forging & stainless lines

LUVOMAT & Flat-Flame — Special FLOX Burners

LUVOMAT burners (up to 500 kW, 850–1,250 °C) handle externally preheated air and dusty or sub-stoichiometric atmospheres, while Flachflamme units (30–300 kW, 700–1,250 °C) fit chamber furnaces and chemical reactors. Spare parts include burner tiles, gas nozzles, UV cells, and flange seals.

  • LUVOMAT up to 500 kW, 850–1,250 °C
  • Flat-flame 30–300 kW
  • Externally preheated air
  • Chamber furnaces & reactors

SiSiC Radiant Tubes & CBFF-V2 / CBR Burner Controls

WS manufactures ceramic SiSiC sleeve tubes up to 2,800 mm with patented metal-flange joints, metallic P and double-P radiant tubes, valve trains, and CBFF-V2 / CBR control boxes (Profibus, Profinet, Ethernet, FLOX®). Spare components include tubes, flame tubes, load modules, and thermocouples.

  • SiSiC tubes up to 2,800 mm
  • Metallic P / double-P & SER
  • CBFF-V2 & CBR control boxes
  • Profibus / Profinet / Ethernet

WS Wärmeprozesstechnik FLOX® Burner Portfolio and Technical Selection

WS Wärmeprozesstechnik supplies FLOX flameless oxidation burners across REKUMAT recuperative, REGEMAT regenerative, and LUVOMAT series alongside SiSiC radiant tubes and CBFF-V2 / CBR burner controls.

Above 850 °C chamber temperature, intense internal flue gas recirculation produces a homogeneous reaction zone without a visible flame front, keeping NOx below 50 ppm at 1,100 °C.

Self-recuperative models span ceramic REKUMAT C/CS (10–100 and 20–100 kW, 700–1,250 °C), metallic REKUMAT M/S (up to 300 kW, >80% efficiency via gap-flow exchangers), low-temperature REKUMAT S NT (10–100 kW below 600 °C, >=90% efficiency), and sub-stoichiometric REKUMAT CR (40–60 kW) with Green Gas hydrogen readiness.

REGEMAT Regenerative Systems, SiSiC Radiant Tubes, and CBFF-V2 / CBR Controls

Continuous galvanizing, annealing, forging, and stainless steel lines utilize REGEMAT 250 (120–140 kW, 800–1,000 °C) and self-contained REGEMAT 350 regenerative burners (200 kW FLOX® + 200 kW boost, 850–1,250 °C) with integrated switching valves.

Special LUVOMAT burners (up to 500 kW) operate with externally preheated air and dusty atmospheres.

Indirect furnace heating relies on SiSiC ceramic sleeve tubes up to 2,800 mm with patented metal-flange joints and metallic P / double-P radiant tubes, paired with customer-wired CBFF-V2 (Profibus, Profinet, Ethernet, Pre-FLOX®/FLOX®) and CBR control boxes plus pre-tested valve trains.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.