Wörner / Wörner Automatisierungstechnik Stoppers & Positioning Modules
Technical specifications and selection for Wörner / Wörner Automatisierungstechnik modules: DBS and PND pneumatic stoppers, DEL and ELD electric stoppers, index cylinders, and spares.
Pneumatic Stoppers DBS & PN
Pneumatic stoppers from Wörner / Wörner Automatisierungstechnik (DBS, PND-67, PNU-395, DBSS, D0-70) decelerate workpiece carriers cleanly. PND-67 stops 65 kg at 6 m/min with 10% less air. Replacement seal sets, pistons, and damping inserts restore service life.
- PND-67: up to 65 kg at 6 m/min
- PNU-395: propelling force 275 N
- PN endurance: > 5M cycles
- Line speed: 6–36 m/min
Electric Stoppers DEL, ELD, ELU
Electric stoppers DEL, ELD, and ELU from Wörner / Wörner Automatisierungstechnik operate on 24 V DC without compressed air. Models DEL-630, ELD-1200, and ELU-300 reach 80% efficiency and cut operating costs sevenfold. Drives, sensors, and stop plates are replaceable.
- Supply: 24 V DC, current < 2 A
- ELD-1200: force up to 750 N
- DEL-630: force up to 250 N
- Energy efficiency: ~80%
Roll Stoppers DBSR & ELUR
Slim roll stoppers DBSR-30, DBSR-270, DBSR-550, DBSR-1000, and ELUR-65 mount directly between conveyor rollers without omitting rollers. Versions cover damped pneumatic and undamped electric stopping from 6 to 36 m/min. Replacement levers, dampers, and seals are supported.
- Series: DBSR-30 .. DBSR-1000
- Electric variant: ELUR-65
- Friction: 0.02 / 0.07 / 0.20
- Fits between conveyor rollers
Angle Dampers DBSQ & ELDQ
Angle dampers DBSQ-15, DBSQ-65, DBSQ-300, DBSQ-1100, and ELDQ-300 smoothly decelerate workpiece carriers at direction changes and stitch ends without lowering. Pneumatic and electric drives match friction factors 0.02 to 0.20. Damping cartridges and stop buffers are replaceable.
- Series: DBSQ-15 .. DBSQ-1100
- Electric series: ELDQ-300
- Design: non-lowering stop
- Use: corners & stitch ends
Index Cylinders DI & DIA
Pneumatic index cylinders DI-490, DI-1050, DI-2200, and DIA-495 accurately locate and lift workpiece carriers directly off the conveyor. They provide a compact alternative to heavy lifting-positioning units. Seal kits, locating pins, and sensors are available as spares.
- Models: DI-490, DI-1050, DI-2200
- Variant: DIA-495 pneumatic
- Drive: pneumatic actuation
- Task: lifting & precision locating
Anti-Bounce Stops DR & PNR
Anti-bounce stops DR, DRP, DRE, PNR, PNRP, and DR-R hold carriers precisely against the main stop without rebound on low-friction conveyors. Lowerable-pawl versions allow reverse transport at workstations. Pawls, springs, and return actuators are supplied as spare parts.
- Pneumatic: DRP, PNRP
- Electric: DRE (lowerable)
- Mechanical: DR, PNR, DR-R
- Supports reverse conveyor flow
Accelerators DAU & Crossings DDS
Pneumatic acceleration units DAU-80 and DAU-350 rapidly bring pallets back to line speed after cycle completion. Displacement stops DDS-80, DDS-160, and DDU-100 fit between parallel tracks to control crossing flows. Rollers, drive cylinders, and seal kits are replaceable.
- Accelerators: DAU-80, DAU-350
- Crossings: DDS-80, DDS-160
- Undamped crossing: DDU-100
- Slim body for line intersections
Spare Parts & Accessories
Maintenance and adaptation parts include adapter plate 45003267, adjusting screw 45003982, angular air connection 04520001, anti-twist lock 17502, anti-bounce stop 44000481, and assembly kit 44000735. Wear parts remain available for repair-friendly legacy units.
- Plate 45003267 / Screw 45003982
- Air fitting 04520001 / 10519
- Backstop 44000481 / 44000551
- Kit 44000735 / Lock 17502
About Wörner / Wörner Automatisierungstechnik GmbH
Founded in 1965 in Denkendorf, Germany, Wörner Automatisierungstechnik GmbH manufactures stopping and positioning modules for assembly and transfer systems.
Its operations comply with DIN ISO 9001 and ISO 14001, serving automotive, electronics, medical technology, and cleanroom lines globally with a sales office in China and a US subsidiary.
This catalog page covers conveyor automation modules from Wörner Automatisierungstechnik GmbH only; centralized lubrication systems from Eugen Woerner GmbH & Co. KG are covered separately.
Selection criteria: pneumatic vs. 24 V DC electric stoppers
Sizing depends on workpiece carrier mass, conveying speed (6, 9, 12, 18, 24, 30, or 36 m/min), and friction coefficient (0.02, 0.07, or 0.20). Pneumatic PND-67 stops up to 65 kg at 6 m/min with 10% lower air consumption than DBS-20/60 and endurance above 5 million cycles.
Electric DEL, ELD, and ELU modules run on 24 V DC (< 2 A) directly from PLC I/O modules, reach approx. 80% energy efficiency compared to 6% for pneumatics, and cut operating costs sevenfold.
Specialized conveyor modules and spare parts support
The lineup includes slim DBSR/ELUR roll stoppers that fit without removing rollers, DBSQ/ELDQ angle dampers, DI-490/DI-1050/DI-2200 index cylinders, DR/DRP/DRE anti-bounce stops, DAU-80/DAU-350 acceleration units, and DDS-80/DDS-160/DDU-100 crossing stops.
Repair-friendly design keeps wear parts such as adapter plates (45003267), adjusting screws (45003982), and assembly kits (44000735) available for years.
Wörner / Wörner Automatisierungstechnik and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wörner / Wörner Automatisierungstechnik and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for WYLER
- Equipment and parts for Shinko Technos
- Equipment and parts for TOHO Electronics
- Equipment and parts for WOMA
Documents and sources
- About Wörner Automatisierungstechnik GmbH — company history since 1965 and ISO 9001 / 14001
- Wörner product overview — stoppers, angle dampers, index cylinders, and backstops
- The PN line — PND-67, PNU-395 pneumatic stoppers and endurance test data
- Electric stoppers DEL, ELD, and ELU — 24 V DC supply and efficiency specs
- Wörner spare parts and accessories — adapter plates, screws, fittings, and assembly kits
- Wörner repair service — long-term availability of wear and spare parts
- Stoppers and separating stops — friction 0.02–0.20 and speed 6–36 m/min range
- Roll stoppers DBSR and ELUR — slim housing for roller conveyor systems
- Angle dampers DBSQ and ELDQ — smooth stopping at direction changes
- Index cylinders DI-490, DI-1050, DI-2200, and DIA-495 — lifting and positioning
- Anti-bounce stops DR, DRP, DRE, PNR, and PNRP — rebound prevention
- Acceleration units DAU-80 and DAU-350 — cycle time reduction on transfer lines
- Displacement stops DDS-80, DDS-160, and DDU-100 — crossing flow control
