WYLER (WYLER AG) Precision Levels & Inclination Sensors
Swiss precision inclination instruments by WYLER AG: BlueLEVEL electronic levels, BlueSYSTEM bundles, Clinotronic S and wylerCLINO inclinometers, nivelSWISS, ZEROTRONIC / ZEROMATIC sensors, and wylerSOFT 3.
BlueLEVEL & BlueLEVEL-2D Electronic Precision Levels
BlueLEVEL and BlueLEVEL-2D provide ±20 mm/m measuring range with 0.001 mm/m (0.2 arcsec) resolution over Bluetooth and RS-232. Single- and dual-axis units align machine beds per DIN 2276/2. Replaceable M4 base inserts and battery caps are available.
- Range: ±20 mm/m
- Resolution: 0.001 mm/m (0.2 arcsec)
- Interface: Bluetooth / RS-232
- Power: 1.5 V size C batteries
BlueSYSTEM Bundles Differential Measurement Kits
BlueSYSTEM II Bundle 003, 004, 005, and 007 combine paired BlueLEVEL instruments with BlueMETER SIGMA readouts and wylerCONNECT adapters. Kits measure straightness, surface-plate flatness, squareness, and bed twist. Individual sensors and bus cables are replaceable.
- Bundles: 003, 004, 005 & 007
- Setup: dual-sensor differential
- Software: wylerSPEC compatibility
- Service parts: adapters & cables
Clinotronic S / PLUS & wylerCLINO Frame Inclinometers
Clinotronic S (±45°) and wylerCLINO Frame (±10° / ±60°) portable digital inclinometers feature color displays, local gravity compensation, and wylerUNIVERSAL Android remote readout. Nickel-plated iron frames offer M3 mounts and magnetic inserts. Spare inserts and battery lids are supported.
- Ranges: ±10°, ±45° & ±60°
- Frame: scraped iron with cross vial
- Remote readout: Android Bluetooth
- Options: magnetic inserts & M3 holes
nivelSWISS Standalone Electronic Alignment Levels
The nivelSWISS standalone electronic inclination instrument uses an analog galvanometer readout with high zero-point stability for rapid machine-tool alignment and table rotation checks. Available with scraped horizontal or angular measuring bases. Replacement bases and probes are serviced.
- Readout: analog galvanometer
- Bases: horizontal or angular scraped
- Zero-point stability: standalone unit
- Use: machine geometry & plates
ZEROTRONIC & ZEROMATIC Industrial Inclination Sensors
ZEROTRONIC 3 (±0.5° to ±10°) and ZEROTRONIC C (±30° to ±60°) digital sensors operate from -40°C to +75°C over long-distance RS-485 links. Dual-axis ZEROMATIC 2/2 (±1°) achieves 1 arcsec stability via automatic 3–24 hour reversal checks. Sensor heads and wylerSOLID enclosures are supported.
- Ranges: ±0.5° to ±60° / ±1° dual-axis
- Temp range: -40°C to +75°C
- Long-term accuracy: 1 arcsec
- Enclosure: wylerSOLID option
Precision Spirit Levels SPIRIT, Clinometer 80 & Water Level 77
Mechanical levels built to DIN 877 and DIN 2276/1 include horizontal 55 SPIRIT, magnetic 48 SPIRIT, frame 58 SPIRIT (0.02–0.3 mm/m), micrometer 52/68, shaft 56/63, cross 76/78, circular 72–74, clinometer 80, and water level 77. Replacement vials and adjustment screws are available.
- Standards: DIN 877 & DIN 2276/1
- Sensitivity: 0.02–5 mm/m
- Models: 48, 55, 58 SPIRIT, 68, 80
- Parts: spirit vials & zero/twist screws
BlueMETER SIGMA Readouts, Interfaces & Bus Cables
BlueMETER SIGMA displays up to four measurement channels (A, B, C, D) and differential 2D graphs (A-B, C-D) from BlueLEVEL, BlueCLINO, Clinotronic, and ZEROTRONIC units. Supported hardware includes LED-CROSS, wylerCONNECT, MultiTC, BlueTC, Hub RS485 boxes, and sensor cables.
- Channels: 4 inputs & A-B / C-D math
- Interfaces: wylerCONNECT, MultiTC, BlueTC
- Display units: BlueMETER SIGMA, LED-CROSS
- Cables: RS-485 hubs & extension cords
wylerSOFT 3 Software, Granite References & SCS Calibration
The wylerSOFT 3 suite (v3.0.5.221: wylerSPEC 3, wylerELEMENTS 3, wylerPROFESSIONAL 3, wylerINSERT 3, SDK 3) runs with BlueLEVEL / BlueCLINO firmware 6.0.0.0 or higher. Granite straight edges, setting squares, and ISO/IEC 17025:2017 SCS 0044 calibration (0.001 mm/m to 360°) complete the system.
- Software: wylerSPEC 3 / wylerDYNAM
- Firmware floor: 6.0.0.0 via wylerEXPLORER 3
- References: granite straight edges & squares
- Lab range: 0.001 mm/m to 360° (SCS 0044)
Selecting WYLER AG Range, Resolution & Mechanical Base
For CNC machine bed alignment, straightness, and surface-plate flatness, BlueLEVEL and dual-axis BlueLEVEL-2D provide a ±20 mm/m range at 0.001 mm/m (0.2 arcsec) sensitivity per DIN 2276/2, while nivelSWISS offers an analog galvanometer readout with high zero-point stability.
Wide-angle tasks up to ±45° or ±60° are covered by the portable Clinotronic S (with wylerUNIVERSAL Android remote display and local gravity correction) and scraped iron wylerCLINO Frame instruments (±10° / ±60°) featuring optional magnetic inserts and M3 mounting holes.
Differential BlueSYSTEM Bundles & 4-Channel BlueMETER SIGMA
When aligning long guideways or heavy beds, floor drift can distort single-instrument readings. Preconfigured BlueSYSTEM II Bundle 003, 004, 005, and 007 kits pair two BlueLEVEL units with a BlueMETER SIGMA readout or wylerCONNECT wireless interface.
BlueMETER SIGMA processes up to four measurement channels (A, B, C, D) simultaneously and renders differential 2D graphs (A-B for X and C-D for Y), while wylerSPEC 3 documents straightness, flatness, perpendicularity, and twist.
Industrial Monitoring with ZEROTRONIC & ZEROMATIC Sensors
ZEROTRONIC 3 (±0.5° to ±10°) and ZEROTRONIC C (±30° to ±60°) digital inclination sensors feature built-in temperature compensation from -40°C to +75°C and long-distance RS-485 bus communication through Hub RS485, MultiTC, and BlueTC interfaces.
For continuous structural, radar, bridge, or machine monitoring, the dual-axis ZEROMATIC 2/2 (±1°) achieves 1 arcsec long-term stability by running automated reversal measurements every 3 to 24 hours, optionally protected inside a wylerSOLID enclosure.
wylerSOFT 3 Software, Granite References & SCS 0044 Lab
The wylerSOFT 3 platform (version 3.0.5.221, including wylerELEMENTS 3, wylerPROFESSIONAL 3, wylerSPEC 3, wylerINSERT 3, and SDK 3) connects over wylerCONNECT and requires BlueLEVEL / BlueCLINO firmware 6.0.0.0 or higher.
Classic DIN 877 and DIN 2276/1 spirit levels (55 SPIRIT, 48 SPIRIT, 58 SPIRIT, micrometer 52/68, shaft 56/63), granite straight edges, setting squares, and ISO/IEC 17025:2017 SCS 0044 metrology reports (0.001 mm/m to 360°) complete the equipment program.
WYLER and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WYLER and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Won-Top Electronics
- Equipment and parts for Wuxi York Intelligent
- Equipment and parts for WOMA
- Equipment and parts for Wuxi Tianyang Electron
Documents and sources
- WYLER AG Official Website (Switzerland)
- WYLER AG Company Profile (Winterthur)
- BlueLEVEL & BlueSYSTEM Precision Levels
- BlueLEVEL-2D Dual Axis Inclinometer
- BlueSYSTEM Bundles Preconfigured Kits
- Clinotronic S Portable Precision Inclinometer
- wylerCLINO Frame ±10° Cast Iron Inclinometer
- nivelSWISS Standalone Electronic Level
- ZEROTRONIC Inclination Sensors (±0.5° to ±60°)
- ZEROMATIC Dual-Axis Long-Term Sensor
- High-Precision Spirit Levels (DIN 877 / DIN 2276/1)
- BlueMETER SIGMA 4-Channel Display Unit
- wylerSOFT 3 Software & Firmware Notes
- WYLER Calibration Lab SCS 0044 (ISO/IEC 17025)
