Würges Vibrationsmotoren / Wuerges Industrial Electric Vibrators

German-made Würges Vibrationsmotoren (Wuerges) rotary unbalance vibrators: standard HV (20 N–127 kN), flange-mounted VFL, ATEX HVE/VFLE, high-frequency HF, 12/24 V DC HV 2 GL, and SR rectifiers.

Compact Foot-Mounted Vibrators HV 0,1 – HV 15

Compact foot-mounted unbalance motors HV 0,1, HV 0,4, HV 1, HV 2, HV 6, HV 8, HV 12 and HV 15 serve feeders, hoppers and screens. Synchronous speeds span 750–3,600 rpm with 20–12,700 N centrifugal force and 0.04–60 cmkg moment. Bearings, weights and covers are replaceable.

  • Speed: 750–3,600 rpm
  • Force: 20–12,700 N
  • Moment: 0.04–60 cmkg
  • Parts: bearings, weights, covers

Heavy-Duty Industrial Vibrators HV 40 – HV 200

Heavy-duty foot-mounted motors HV 40, HV 70/75, HV 100, HV 180 and HV 200 drive large screens, foundry shakeouts and conveyors. Speeds cover 750–1,800 rpm with 3,000–127,000 N (127 kN) force and 67–2,300 cmkg working moment. Heavy bearings, eccentric discs and housings are serviceable.

  • Speed: 750–1,800 rpm
  • Force: 3,000–127,000 N
  • Moment: 67–2,300 cmkg
  • Models: HV 40 to HV 200

Flange-Mounted Electric Vibrators VFL 2

Flange-mounted vibrators in the VFL 2 series permit multi-orientation mounting with the same mechanical strength as foot mounting. Operating at 1,500–3,600 rpm, they deliver 440–1,898 N force and 1.39–3.7 cmkg moment in compact frames. Seals, bearings and covers are replaceable.

  • Mounting: multi-angle flange
  • Speed: 1,500–3,600 rpm
  • Force: 440–1,898 N
  • Moment: 1.39–3.7 cmkg

Explosion-Protected ATEX Vibrators HVE 2 / VFLE

Explosion-protected HVE 2 and VFLE vibrators comply with ATEX Directive 2014/34/EU for hazardous gas and dust environments. Available in 5 variations, HVE 2 runs at 1,500–3,600 rpm with 440–2,860 N force and 1.85–9.0 cmkg moment. Ex seals, glands, bearings and covers are replaceable.

  • Compliance: ATEX 2014/34/EU
  • Speed: 1,500–3,600 rpm
  • Force: 440–2,860 N
  • Moment: 1.85–9.0 cmkg

High-Frequency External Vibrators HF 2 – HF 15

High-frequency external vibrators HF 2, HF 6, HF 8 and HF 15 operate at 3,000–6,000 rpm for rapid, fine-pitch concrete compaction and screening. Centrifugal force spans 1,980–20,000 N (up to 20 kN) across 10 models. High-speed bearings, seals and end covers are replaceable.

  • Speed: 3,000–6,000 rpm
  • Force: 1,980–20,000 N
  • Models: HF 2, HF 6, HF 8, HF 15
  • Use: compaction & fine screening

DC Industrial Vibrators HV 2 GL (12 / 24 V DC)

Direct-current vibrators HV 2 GL operate on 12 V or 24 V DC for mobile vehicles and off-grid equipment without AC mains power. Offered in 3 variations at 3,000 rpm, HV 2 GL generates 1,100–1,980 N force and 2.33–4.16 cmkg working moment. Brushes, bearings and weights are replaceable.

  • Voltage: 12 V or 24 V DC
  • Speed: 3,000 rpm
  • Force: 1,100–1,980 N
  • Moment: 2.33–4.16 cmkg

Oscillating Rectifiers SR and Flange-Split IP 66 Covers

Oscillating rectifiers (SR) bolt onto HV2, HF2, HVE2, HV6–HV65 and HF15 motors for directed linear vibration on guided chutes. For tight clearances, motors are offered with 1 or 2 flange-split IP 66 covers and two-output-stage builds. Split covers and seals are replaceable.

  • SR fit: HV2–HV65, HF2, HF15, HVE2
  • Protection: IP 66 flange-split
  • Config: 1 or 2 split covers
  • Variants: 2-output-stage builds

Würges Vibrationsmotoren (Wuerges) Manufacturing Base and Focus

Würges Vibrationsmotoren GmbH in Neusäss near Augsburg manufactures electric unbalance vibrators exclusively since 1965, covering HV foot-mounted motors (20 N to 127 kN), VFL flange units, HVE ATEX motors, HF high-frequency vibrators, HV 2 GL 12/24 V DC motors, and SR linear directional units.

Operating at Boschstrasse 9, D-86356 Neusäss, the German factory builds and tests rotary vibration drives for harsh environments involving high heat, moisture, dust, and heavy mechanical loads.

The plant operates under ISO 9001-2015 quality management and manufactures explosion-protected electric vibrators compliant with European ATEX Directive 2014/34/EU.

Model Matrix: HV, VFL, HVE/VFLE, HF, HV 2 GL and Oscillating Rectifiers SR

Foot-mounted HV motors span 13 frame series from HV 0,1 (3,000–3,600 rpm, 20–58 N, 0.04–0.08 cmkg) through mid-range HV 2 / HV 15 / HV 40 (up to 25,000 N) up to heavy-duty HV 70/75, HV 100, HV 180 and HV 200 (56,500–127,000 N, 630–2,300 cmkg).

Flange-mounted VFL 2 vibrators (1,500–3,600 rpm, 440–1,898 N) enable multi-orientation mounting with foot-mount strength.

High-frequency external vibrators HF 2, HF 6, HF 8 and HF 15 run at 3,000–6,000 rpm (1,980–20,000 N) for faster, finer compaction. Where AC mains power is unavailable, HV 2 GL motors run at 3,000 rpm on 12 V or 24 V DC (1,100–1,980 N).

Oscillating rectifiers (SR) bolt onto HV2, HF2, HVE2, HV6–HV65 and HF15 drives to generate directed linear vibration.

IP 66 Flange-Split Covers, Two-Stage Builds and Spare Parts Selection

For confined installations, selected HV vibration motors are available with one or two flange-split protective covers rated to IP 66 while retaining standard HV electrical ratings.

Two-output-stage vibration motors and alternative mounting footprints allow direct integration into existing vibrating screens, feeders, hoppers, and concrete formwork.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.