WTE Präzisionstechnik / WTE Precision Clamping Chucks & Toolholders

German-engineered WTE Präzisionstechnik (WTE) hydraulic expansion chucks, ThermoChuck shrink holders, Precision-DrillChuck units from 0.2 mm, and HSK/SK/BT arbors.

HydroChuck MHC and HighTorque Chuck (HTC) Hydraulic Chucks

Engineered at WTE Ehrenfriedersdorf, HydroChuck MHC and HighTorque Chuck HTC achieve < 3 μm radial run-out with strong damping. The 3° slim HTC geometry fits deep mould cavities under high torque. Axial/radial μm screws, sleeves, and MQL tubes are replaceable.

  • Run-out accuracy: < 3 μm
  • HTC contour: 3° slim design
  • MQL support: 1- & 2-channel
  • Parts: μm screws, sleeves

UNIQ Mill Chuck and UNIQ DReaM Chuck 4.5° Hydraulic Chucks

The WTE / MAPAL UNIQ series suppresses micro-vibration and cuts spindle load by up to 15 percent. UNIQ Mill Chuck holds HA shanks at 80 °C over 240 minutes up to 33,000 rpm. UNIQ DReaM Chuck 4.5° matches DIN 69882-8 contours from 3–5 mm with optional DirectCool.

  • Speed rating: up to 33,000 rpm
  • Thermal limit: 80 °C (> 240 min)
  • Contour: 4.5° DIN 69882-8
  • Spindle load drop: up to 15%

ThermoChuck MTC Heat-Shrink Toolholders

ThermoChuck MTC shrink chucks use high-temperature tool steel for high torque transfer and radial rigidity. Radial run-out and bore repetition accuracy stay < 3 μm. Each holder is finely balanced and supports MQL with or without axial length-adjustment screws.

  • Bore run-out: < 3 μm
  • Steel grade: high-temperature
  • Length stop: axial screw option
  • Standard: fine balanced, MQL

Precision-DrillChuck (MPC) and Micro-Precision-DrillChuck

WTE Precision-DrillChuck (MPC) and Micro units provide direct clamping from 0.2 mm independent of spindle rotation. Lateral locking uses a bevel gear, pinion, and T-handle hex wrench. Modular heads fit machine tapers, with 2.5 mm pins switching Form AD or B coolant.

  • Direct clamping: from 0.2 mm
  • Mechanism: bevel gear & pinion
  • Coolant: Form AD / B threaded pins
  • Parts: jaws, pinion, hex pins

System HB Power Chucks and MDA / MCA / MFS Milling Cutter Arbors

Mechanical milling chucks cover System HB Power Chuck with a two-piece clamp, differential screw, and spring positioning. The range includes collet, Weldon, and Whistle Notch chucks, vibration-damping MDA arbors, heavy-duty MCA arbors, and MFS screw-in holders.

  • System HB: differential screw
  • Damping: MDA cutter arbors
  • Types: collet, Weldon, Whistle Notch
  • Interfaces: MCA face & MFS thread

Manual HSK KS Clamping Units, Reducers and Modular Extensions

Modular tooling from WTE / MAPAL covers manual HSK clamping units with the KS cartridge for spindle or flange mounting. The range includes HSK reducers and extensions, KS steep taper adapters, hydraulic and thermal tool extensions, blanks, and coolant tubes.

  • HSK clamping: KS cartridge unit
  • Extensions: hydraulic & thermal
  • Adapters: HSK & KS steep taper
  • Hardware: coolant tubes, bolts

WTE Präzisionstechnik Manufacturing Base and Clamping Portfolio

WTE Präzisionstechnik in Ehrenfriedersdorf manufactures hydraulic expansion chucks, ThermoChuck shrink chucks, Precision-DrillChuck units from 0.2 mm, milling cutter arbors, and MQL toolholders.

Operating at Gewerbegebiet an der B95, 2a, D-09427 Ehrenfriedersdorf as the MAPAL Group Centre of Competence for chucks, the 120-employee plant produces standard and special clamping tools for global machining centres (wte.mapal.com redirects to mapal.com).

The lineup spans manual HSK clamping units with the KS clamping cartridge, hydraulic and shrink holders, modular drill chucks, MDA vibration-cancelling arbors, MCA/MFS adapters, and HSK/KS reducers and extensions.

Run-Out Precision, UNIQ Thermal Stability and Slim Contours

HydroChuck MHC, HighTorque Chuck HTC (3° slim design), and ThermoChuck MTC maintain radial run-out and repetition accuracy < 3 μm in the bore. UNIQ Mill Chuck handles HA shanks at 80 °C across milling cycles exceeding 240 minutes up to 33,000 rpm.

UNIQ DReaM Chuck 4.5° replicates the DIN 69882-8 heat-shrink outer contour from 3 to 5 mm and larger, reducing micro-vibration and cutting spindle load by up to 15 percent while supporting decentralized DirectCool channels.

MQL Coolant Systems and Mechanical Clamping Integration

Clamping systems support both 1-channel and 2-channel MQL machining through sealed HTC, shrink, and length-adjustable hydraulic toolholders.

Mechanical Precision-DrillChuck MPC and Micro-Precision-DrillChuck clamp directly from 0.2 mm via bevel gear and pinion, with threaded pins adapting coolant delivery between Form AD and Form B.

WTE Präzisionstechnik and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WTE Präzisionstechnik and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.