Veith System Cutting-Room Pin Tables and Spreading Systems

Precision pattern-matching pin tables (KT, SKT, MONO/DUO), overhead Cloth-Roll Magazine gantry spreaders, STOLK needle plates, and PinIT software engineered by Veith System GmbH, Germany.

VEITH Pin Table for Woven Fabrics (KT-type)

The standard VEITH Pin Table for woven fabrics measures 406 cm in length with 2 m modular extensions, 170 cm standard width (options up to 240 cm), and 80–90 cm adjustable working height. Ball-point needles (1.0–1.8 mm) protect yarns inside panels, yielding 3–8% fabric savings.

  • 406 cm length, 2 m extensions
  • 170–240 cm width, 80–90 cm height
  • Ball-point pins 1.0 / 1.4 / 1.8 mm
  • 3–8% fabric and 30–50% labor savings

VEITH Pin Table SKT for Tubular Knitted Fabrics

SKT pin tables align open-width tubular knitted fabrics with horizontal or slanted stripes from circular knitting. Needle bars swivel up to 13 degrees and lock with a brake even mid-spread. Standard length is 406 cm in widths from 170 to 240 cm, cutting fabric waste by 5–10%.

  • Needle bar swivel angle up to 13°
  • Standard 406 cm length, 212 cm width
  • Optional 0.6 × 25 mm fine needles
  • 5–10% knitted fabric savings

VEITH Pin Table for Flat Knitted Fabrics (MONO / DUO)

This pin table aligns horizontal stripes and vertical cable knits across multiple plies without single-piece cutting. Built in MONO (204 × 114 cm) and DUO (204 × 226 cm) versions at 80–90 cm height. Gear-rack mechanics keep bars strictly perpendicular.

  • MONO single workplace: 204 × 114 cm
  • DUO double workplace: 204 × 226 cm
  • Gear-rack perpendicular bar alignment
  • 80–90 cm height, hand-wheel pin lift

VEITH Cloth-Roll Magazine with Integrated Gantry Spreader

The VEITH Cloth-Roll Magazine with integrated gantry spreader stores cloth rolls on overhead tracks with a pneumatic clamping mechanism, pneumatic face-to-face roll turning, and ball-bearing trolleys. Built over existing tables for MTM and 1–5 ply quick-response lays.

  • Pneumatic roll clamp and face-to-face turn
  • Overhead ball-bearing roll trolleys
  • Pairs with pneumatic cutting device
  • Fits MTM and 1–5 ply quick response

VEITH Needle-Plates (STOLK) and Spare Needles (ENSTO)

VEITH Needle-Plates (STOLK) stabilize stacked plies from above without clamp compression or shifting during manual or CNC cutting. Sliding bridges guide 45 mm × 1 mm pins cleanly into the lay. Packed as 12 STOLK plates and 10 ENSTO spare needles.

  • Article STOLK: 12 plates per pack
  • Article ENSTO: 10 spare needles
  • 45 mm pin length, 1 mm diameter
  • Zero clamp pressure inside lay center

VEITH PinIT Matching and Marker Software

VEITH PinIT software links X and Y fabric repeats with CAD markers and exact pin-table needle bar positions. It generates frame parameters for slanted knit stripes and supports NB-shift offsets. Blocking allowances disappear, enabling net CNC cutting.

  • X/Y repeat and Y-offset calculation
  • Frame parameters for slanted stripes
  • NB-shift needle bar offset support
  • Works with CAD markers and CNC cutters

Selecting the right VEITH Pin Table for woven, tubular, or flat-knit fabrics

Tailored menswear and shirting lines rely on the KT-type VEITH Pin Table (406 cm base length with 2 m extensions, 170 to 240 cm widths) with ball-point needles in 1.0, 1.4, and 1.8 mm diameters to protect fibers inside panels.

Circular open-width knitters use the SKT table, whose needle bars swivel up to 13 degrees to align helical stripe skew without destructive stentering.

For flat-knitted garments with horizontal stripes and vertical cables, MONO (204 × 114 cm) and DUO (204 × 226 cm) units use gear-rack mechanics to hold bars perpendicular. Air flotation and end-cutter adapters move finished multi-ply lays directly onto automatic CNC cutters.

Eliminating blocking tolerances with PinIT software and Cloth-Roll Magazine

With more than 900 installations worldwide, VEITH pairs hardware tables with PinIT software to turn matching into a structured CAD workflow.

PinIT calculates X and Y repeats, Y-offsets, NB-shift adjustments, and slanted-stripe frame parameters so markers are planned for net cutting with 3–10% fabric savings.

In MTM and quick-response cutting rooms handling 1–5 ply lays across varied fabrics, the overhead Cloth-Roll Magazine stores rolls on ball-bearing trolleys with pneumatic clamping and face-to-face roll turning, replacing manual roll lifting and floor racks.

Veith System and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Veith System and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.