Vezzani Industrial Scrap Shears and Presses

Stationary and mobile inclined shears (PC/AC, VS), baling presses (P), EAF basket presses (PCF), briquetting presses (B), and 360° integrated recycling systems engineered by Vezzani S.p.A., Italy.

PC / AC Stationary Inclined Shears

PC/AC stationary inclined shears deliver 500 to 2,400 metric tons of shearing force with feeding box widths from 2,000 mm to 3,700 mm and throughput exceeding 150 t/h. Gravity feed removes lids and pusher rams, cutting wear contact by 60%. Cylinder transducers track stroke and seal wear via PLC.

  • 500 to 2,400 t shearing force
  • 2,000–3,700 mm feed box width
  • Throughput exceeding 150 t/h
  • PLC cylinder seal wear sensors

VS Mobile Inclined Shears

VS mobile inclined shears operate with electric motors or diesel engines and require no foundations or civil works on flat yard surfaces. Continuous crane loading processes oversized scrap without pre-cutting. Side and vertical compression raises density while bolted liners simplify maintenance.

  • Electric or diesel powerpack
  • No foundation or civil works
  • Continuous crane loading
  • Side and vertical compression

P Series Baling Presses

P series baling presses form 20x20xvar to 80x80xvar bales at throughput above 80 t/h for ferrous and non-ferrous scrap. Densities reach 3.6 kg/dm3 for steel, 4.5 kg/dm3 for copper, and 1.85 kg/dm3 for aluminum. Tie-bolted chambers use replaceable wavy or grooved liners and auto-lubrication.

  • Throughput exceeding 80 t/h
  • Fe density up to 3.6 kg/dm3
  • Bales 20x20xvar to 80x80xvar
  • Bolted replaceable wear liners

PCF EAF Direct-Charging Basket Presses

PCF direct-charging basket presses compact successive scrap charges inside the EAF basket with a vertical pressure block. Doubling charge density improves arc efficiency and fills the furnace with fewer baskets. Shorter furnace open intervals raise daily steel melts and shop throughput.

  • Compacts scrap inside EAF basket
  • Doubles scrap charge density
  • Fewer charging baskets per heat
  • Reduces furnace open time

B Series Briquetting Presses

B series briquetting presses compress bushy or chipped metal turnings into 120 to 250 mm briquettes at up to 23 t/h without turning preprocessing. Exact dosing keeps uniform density for furnace remelting and compact storage. Open service access simplifies routine cylinder and die maintenance.

  • 120 to 250 mm briquette diameter
  • Output up to 23 t/h
  • No long-turning preprocessing
  • Exact chip dosing control

PC / PCM Horizontal Press Shears

PC/PCM horizontal hydraulic shears handle triple-duty operation as a scrap shear, three-compression baler, or portable logger up to 2,400 t force. Modular engineering delivers fast cycles and high reliability across scrap grades. Smaller models offer mobile chassis options for multi-yard use.

  • Triple-duty shear and baler
  • Up to 2,400 t shearing force
  • Fast cycle hydraulic system
  • Mobile lower-tonnage options

PM Portable Baling and Logging Presses

PM portable presses extend PCM horizontal shear hydraulics for high-density baling and car-body logging on mobile sites. Box lengths span 4 to 6 m with variable pusher rams rated up to 210 to 250 tons. Units come with diesel or electric drives in mobile or transportable builds.

  • 4 to 6 m charging box length
  • 210–250 t variable pusher ram
  • Diesel or electric drive
  • Mobile or transportable build

360° Integrated Scrap Processing Systems

Vezzani turnkey integrated systems pair shears and balers with conveyors, separation lines, cranes, and weighing modules. Every layout is customized to yard geometry and scrap mix for continuous flow. Support includes 24/7 telediagnostic monitoring and smart-glasses remote assistance.

  • Conveyors and separation lines
  • Integrated cranes and scales
  • Site-specific turnkey layout
  • 24/7 telediagnostic monitoring

Selecting between PC/AC stationary, VS mobile, and PC/PCM horizontal shears

PC/AC stationary inclined shears (500 to 2,400 metric tons, 2,000 to 3,700 mm feeding box width, exceeding 150 t/h) use gravity-fed continuous crane loading without pusher rams or box lids, eliminating squeeze-box cycle pauses and reducing scrap contact surface by 60%.

VS mobile inclined shears bring the same inclined pre-compression mechanics to flat yard surfaces without foundations or civil works using electric or diesel drives, whereas PC/PCM horizontal press shears and PM portable presses (4 to 6 m box, 210–250 t pusher ram) fit operations needing triple-duty shearing, baling, and car logging.

Matching P balers, PCF basket presses, and B briquetting lines to scrap grades

P series baling presses run above 80 t/h and produce 20x20xvar to 80x80xvar bales reaching 3.6 kg/dm3 for steel, 4.5 kg/dm3 for copper, and 1.85 kg/dm3 for aluminum, protected by tie-bolted frames and replaceable grooved or wavy wear liners.

In EAF melt shops, PCF basket presses double scrap density directly inside the charging basket to reduce open-furnace intervals.

For machine-shop swarf and bushy turnings, B series briquetting presses eliminate turning preprocessing and produce 120 to 250 mm diameter briquettes at up to 23 t/h. Across all lines, internal cylinder transducers report stroke position and seal condition directly to the PLC.

Vezzani and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Vezzani and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.