Carlo Gavazzi Industrial Equipment & Automation Systems
We supply complete industrial automation systems, electrical power quality analyzers, solid-state relays, proximity sensors, and soft starters by Carlo Gavazzi for continuous manufacturing lines and critical facility infrastructure.
Carlo Gavazzi Automation Systems, Relays & Energy Meters
Select an equipment category or device family. You can attach single-line electrical schematics, modernization technical briefs, or equipment parts schedules to your inquiry.
Carlo Gavazzi EM111, EM24, EM340 Energy Management & Power Quality Analyzers
Carlo Gavazzi EM111, EM210, EM24, and EM340 intelligent energy metering systems and power quality analyzers deliver continuous monitoring across utility switchboards and data centres. Certified under European MID standards, they provide bidirectional precision metering of active and reactive energy.
Systems support direct connection up to 65 A and external 5 A / 1 A current transformers. Built-in Modbus RTU and M-Bus ports stream power profiles, voltage metrics, and harmonic data to plant SCADA.
Selection criteria: single-phase (EM111) or three-phase (EM340, EM24) topology, current rating, accuracy class, and fieldbus protocol.
Carlo Gavazzi SPD, SPM, SPPC Industrial DIN-Rail Switching Power Supplies
Carlo Gavazzi SPD, SPM, and SPPC regulated DIN-rail switching power supplies deliver stable secondary voltages of 12 V, 24 V, and 48 V to controllers, sensors, and actuators. High conversion efficiency up to 93% mitigates heat dissipation inside enclosures, expanding hardware service life.
Capacities span 10 W to 960 W across universal AC/DC inputs. Units incorporate active PFC circuits, DC-OK status contacts, and parallel current-sharing for redundant N+1 power architectures.
Selection criteria: output power (10 to 960 W), DC voltage rating (12, 24, 48 V), PFC requirement, and DC-OK diagnostic relay.
Carlo Gavazzi RSGD, RSBS, RSWT Soft Starters & Motor Controllers
Carlo Gavazzi RSGD, RSBS, and RSWT solid-state soft starters optimize startup and stopping dynamics for induction motors up to 45 kW in pumps, compressors, and fans. Devices eliminate current surges, reduce stress on drivetrains, and prevent water hammer in piping networks.
RSGD features self-learning algorithms that adjust voltage ramp profiles to shifting load inertia. Internal bypass contactors engage at nominal speed, minimizing thermal accumulation inside electrical enclosures.
Selection criteria: motor operational current (12 to 100 A), mains voltage (up to 600 V AC), load category, and integrated bypass configuration.
Carlo Gavazzi DPA51, DPA02 Three-Phase Power Quality & Equipment Protection Relays
Carlo Gavazzi DPA51, DPA02, and DPB01 monitoring relays protect three-phase motors and machinery against distribution grid faults. Units continuously verify phase sequence, phase loss, voltage asymmetry, and over/undervoltage thresholds.
The compact 17.5 mm DIN-rail profile preserves cabinet space, while fast electromechanical changeover contacts instantly trip contactors upon detecting power supply anomalies, preventing motor winding burnouts.
Selection criteria: monitored phase voltage (208 to 480 V AC), asymmetry threshold, SPDT/DPDT output rating, and trip delay time.
Carlo Gavazzi IA, ICS, EC, CA, PD30 Industrial Non-Contact Sensor Systems
Carlo Gavazzi RGC solid-state contactors and RM1A, RAM1A relays handle switching currents up to 125 A at mains voltages up to 660 V AC.
Ideal for heating control across plastic extruders, packaging lines, and drying tunnels, zero-cross switching prevents arcing and acoustic noise, delivering lifespans exceeding tens of millions of cycles.
Direct Copper Bonding substrate technology maximizes heat dissipation across integrated heatsink profiles.
Selection criteria: technology (inductive, capacitive, optical), housing size (M8 to M30), sensing range, and PNP/NPN switching output.
Carlo Gavazzi RGC, RGS, RM1A Solid-State Power Relays & Heating Controllers
Carlo Gavazzi IA, IC, EI inductive sensors and CA series capacitive sensors with TRIPLESHIELD technology ensure object detection and bulk level control. Rugged stainless or nickel-plated brass cylindrical housings (M8 to M30) rated IP67/IP69K withstand aggressive coolants and metal chips.
Capacitive models resist electrostatic discharges and moist dust accumulation, reliably detecting polymer pellets, liquids, and powders in processing vessels.
Selection criteria: load current capacity (20 to 125 A), switching voltage (up to 690 V AC), DIN/chassis mounting, and control signal type.
Carlo Gavazzi Dupline Industrial Fieldbus & Signal Acquisition System
Carlo Gavazzi NES, NDA safety relays and SB safety light curtains protect operators across stamping presses, automated assembly cells, and robotic zones up to SIL 3 and PLe. Relays monitor emergency stop pushbuttons, interlock safety switches, and optical light grids.
Upon optical barrier breach or safety stop activation, output circuits trip within 20 ms, safely isolating hazardous machinery drives.
Selection criteria: field network topology (up to 10 km), I/O channel quantity, PLC gateway protocol, and enclosure IP sealing rating.
Carlo Gavazzi Machinery Safety Modules & Protective Light Curtains
Carlo Gavazzi Dupline fieldbus transmits digital and analog signals up to 10 km over unshielded twisted-pair wiring. Exceptional noise immunity establishes Dupline as a standard across mining conveyor corridors, water treatment plants, and tunnel systems.
Fieldbus gateways translate distributed Dupline I/O data into Modbus, Profibus, or Ethernet for master PLCs, drastically cutting field cabling overhead.
Mains voltage and rated load current, operational load type (resistive heating elements, induction motors, inductive transformers), output switching logic, communication protocols (Modbus RTU, M-Bus, IO-Link), and enclosure installation form factor for DIN-rail or chassis mounting.
Replacement Modules & Auxiliary Parts
Precise manufacturer catalog ordering code from product housing, firmware revision code, terminal block configuration, current rating, and high-resolution photographs of the device nameplate.
Carlo Gavazzi Group and Industrial Engineering Heritage
The Carlo Gavazzi Group is a globally recognized manufacturer of electronics for industrial automation, energy management, and building control.
Founded in 1931, the group operates manufacturing facilities across Italy, Lithuania, Malta, and China, managed from its international headquarters in Switzerland. Its products operate across packaging, food processing, plastics, and material handling sectors.
Rugged circuit architecture guarantees immunity against severe electrical transients, voltage sags, and mechanical vibration.
Intelligent Energy Management and Power Quality Analysis
Carlo Gavazzi EM111, EM210, EM24, and EM340 energy management platforms and WM power analyzers provide continuous power quality oversight across distribution switchboards.
The meters deliver bidirectional four-quadrant metering of active and reactive energy, recording harmonic distortion and phase imbalances. Modbus RTU, Modbus TCP, and M-Bus connectivity empowers plant BMS and SCADA packages to optimize energy costs and protect distribution transformers.
Solid-State Switching for Demanding Thermal Applications
Carlo Gavazzi RGC, RGS, RM1A, and RAM1A solid-state relays and contactors deliver benchmark reliability for electrical heating in plastics extruders, injection molding machines, and industrial ovens.
Moving-part-free construction eliminates electrical arcing, contact bounce, and acoustic noise, achieving operating lives past tens of millions of cycles. Direct Copper Bonding technology transfers heat into heatsinks, while onboard varistors clamp transient switching spikes.
Adaptive Motor Starting and Mechanical Drivetrain Protection
Carlo Gavazzi RSGD, RSBS, and RSWT soft starters reduce starting current surges and suppress mechanical shock loads across pumps, blowers, and screw compressors.
The self-learning RSGD microprocessor algorithm automatically adjusts voltage acceleration profiles to actual load inertia without complex commissioning. Integrated electromechanical bypass contactors short-circuit thyristors at nominal speed, minimizing cabinet heat accumulation.
Precision Sensing Technology and Environmental Immunity
Inductive proximity, capacitive bulk level, and photoelectric sensors from Carlo Gavazzi provide dependable parts detection across industrial machines. Stainless steel and nickel-plated cylindrical sensors rated IP67/IP69K withstand aggressive machining coolants and debris.
Capacitive sensors featuring fourth-generation TRIPLESHIELD technology resist electrostatic discharge and moist dust buildup in dry material hoppers and storage vessels.
Long-Distance Dupline Fieldbus for Dispersed Infrastructure
The proprietary Carlo Gavazzi Dupline fieldbus transmits discrete and analog sensor inputs up to 10 kilometers over standard unshielded twisted pairs. Extreme noise immunity establishes Dupline as the benchmark across mining conveyors, municipal water stations, and tunnel ventilation.
Distributed I/O modules interface with master PLCs via Modbus and Profibus communication gateways, drastically slashing cabling and civil engineering expenses.
Certified Machine Safety Relays and Optical Safeguarding
Carlo Gavazzi NES, NDA safety relays and SB light curtains ensure automated manufacturing lines comply with SIL 3 and PLe machinery safety directives. The devices perform continuous hardware self-diagnostics across emergency stop buttons, gate interlocking switches, and optical perimeter barriers.
Upon optical intrusion or E-stop actuation, redundant safety outputs trip power contactors in under 20 ms, eliminating personnel hazards.
Submit Technical Specification
Submit your supply inquiry for complete systems or replacement hardware from Carlo Gavazzi. Technical engineering specialists will review project parameters, verify configuration options, and deliver commercial terms promptly.
