Ningbo Blin Machinery / BLIN MACHINERY — CNC Machine Tools & Machining Centers

Global supply of precision CNC turning machines and vertical machining centers manufactured by Ningbo Blin Machinery Co., Ltd. (China). Comprehensive solutions covering BL-V milling centers, BL-S slant bed lathes, BL-CSL Swiss-type turning machines, and heavy BL-VL vertical lathes from SpareX.

BLIN BL-V Series Vertical Machining Centers

Vertical machining centers BL-V4, BL-V7, BL-V8 and BL-V11 deliver high-speed 3D contour milling for molds and parts. The heavy cast iron frame suppresses machining chatter during heavy-duty cutting. We supply direct-drive spindle cartridges, linear guideways, ballscrews and digital servo motors.

High-rigidity BT40 and BT50 direct-drive spindle cartridges
Arm-type 24-pocket automatic tool changer (ATC)
Heavy-duty linear roller guideways on X, Y, Z axes
Precision ballscrews, angular contact bearings and seals

BLIN BL-S Series Slant Bed CNC Lathes

Slant bed CNC lathes BL-S32, BL-S36, BL-S200 and BL-S300 feature a 45-degree true slant bed structure. This configuration facilitates free chip flow and maximum rigidity under heavy-duty turning. We supply hydraulic chucks, rotating cylinders, servo tool turrets and way scraper kits.

Rigid 45° true mono-block slant bed casting design
Hydraulic power chucks and rotary through-hole cylinders
High-speed servo-driven 8/12-station tool turrets
Hydraulic seal kits, chuck jaws and drive accessories

BLIN BL-CSL Series Swiss-Type CNC Lathes

Swiss-type CNC lathes BL-CSL075, CSL123 and CSL205 handle precision production of miniature and slender parts. Synchronous sub-spindles and live radial tooling allow full front and back machining. We supply guide bushings, collet chucks, spindle drives and high-pressure coolant nozzles.

High-precision machining for bar stock from 0.5 to 20 mm
Synchronized sub-spindle for back-end component finishing
Driven tooling blocks for off-axis milling and drilling
Precision collets, rotary guide bushings and coolant lines

BLIN BL-CK Series Flat Bed CNC Lathes

Flat bed CNC lathes BL-CK6140 and BL-CK6150 are built for turning medium-sized shafts, tubes, and flange workpieces. Induction-hardened bed guideways ensure long-lasting positioning accuracy under heavy workshop duty. We deliver spindle drive belts, 4-way electric tool posts, and encoders.

Swing over bed up to 500 mm with distance between centers 1500 mm
Induction hardened and ground bed guideways for wear resistance
Heavy-duty 4-station automatic electric indexed tool posts
Telescopic stainless steel covers, carriage seals and belts

BLIN BL-T Series High-Speed Drill & Tap Centers

Drilling and tapping centers BL-T500 and BL-T600 are optimized for mass production of automotive aluminum electronic enclosures. Rapid tool exchange in 1.5 seconds cuts idle cycle times dramatically. We supply BT30 tool grippers, magazine cam boxes, pneumatic unclamp cylinders and servo motors.

High-speed BT30 direct-coupled servo spindle cartridge
Fast servo tool change mechanism with 1.5 s chip-to-chip cycle
Rapid traverse speed reaching 48 m/min on all linear axes
Pneumatic unclamp cylinders, tool claws and rotary sensors

BLIN BL-VL Series Heavy Vertical Turning Lathes

Vertical turning lathes BL-VL400, BL-VL800 and BL-VL2500H process heavy rings, valve bodies, and railway wheels weighing up to 15 tons. A massive column and hydrostatic table bearings deliver smooth heavy roughing. We deliver hydraulic chuck jaws, table drive gearboxes and lubrication units.

Table diameters from 400 to 2500 mm with load capacity up to 15 tons
Hydrostatic guideways with independent oil temperature control
High-torque two-speed mechanical transmission gearboxes
Hardened top chuck jaws, hydraulic manifolds and proportional valves

BLIN Spindle Cartridges, Tool Turrets & Tooling

Spindle cartridges and servo tool turrets dictate the precision and repeatability of BLIN machine tools. Worn spindle bearings degrade surface finish and cause workpiece runout. We supply preloaded angular contact bearing sets, rotary tool holders, BMT turret disks and encoder coupling kits.

Class P4/P2 high-precision angular contact matched bearing sets
Labyrinth air purge seals protecting spindle bearings from mist
VDI and BMT tool disks with driven axial/radial tool holders
Optical encoder couplings, proximity limit switches and cables

Engineering Service, Diagnostics & Spare Parts

SpareX provides technical support, spare parts distribution, and machine diagnostics for BLIN equipment globally. We support complete machine overhauls, ballscrew replacement, spindle rebuilds, and electrical debugging. Parts are verified against factory serial numbers to prevent machine downtime.

Comprehensive machine inspection, vibration analysis and laser calibration
Rapid dispatch of direct replacement parts matched by machine serial number
Ballscrew and linear guideway overhaul with bearing preload verification
Turnkey technical documentation, schematics and commissioning support

Manufacturing Capabilities and Machine Tool Lineup of BLIN MACHINERY

Ningbo Blin Machinery Co., Ltd. produces an extensive portfolio of advanced CNC machine tools designed for demanding metal-cutting environments.

The manufacturing program includes BL-V series vertical machining centers, BL-S slant bed CNC turning centers, BL-CSL high-precision Swiss-type lathes, and heavy-duty BL-VL vertical turning machines.

The equipment incorporates rigid Meehanite cast iron structural components, induction-hardened guideways, high-precision C3-class ballscrews, and dynamically balanced spindle cartridges engineered to machine titanium, stainless steels, and aerospace aluminum alloys.

Technical Selection Criteria and Production Engineering Support

Selecting the right BLIN CNC machine configuration depends on part geometry, required dimensional tolerances, batch sizes, and automated loading requirements. For high-volume miniature shafts and medical pins, BL-CSL Swiss-type turning centers with live radial tools provide optimal cycle times.

For mold cavities, aerospace structural components, and precision housings, the BL-V series offers high-rigidity BT40 and BT50 spindles with optional high-pressure through-spindle coolant (CTS).

SpareX provides comprehensive technical assessments, tooling recommendations, and direct factory export coordination.

Ningbo Blin Machinery / BLIN MACHINERY and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Ningbo Blin Machinery / BLIN MACHINERY and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.