WFL Millturn Technologies / MILLTURN Complete Machining Centers

Multifunctional turning-boring-milling machining centers by WFL Millturn Technologies / MILLTURN engineered for complex aerospace and heavy engineering workpieces.

WFL M30 and M35 MILLTURN Complete Machining Centers

Multifunctional M30 and M35 MILLTURN complete machining centers deliver simultaneous five-axis turning, milling, and drilling operations for complex aerospace parts. The rigid slant bed architecture supports center distances scaling up to 2000 mm.

Maximum swing and turning diameter between centers measures up to 520 mm throughout
Main turning spindle powertrain rated at 33 to 54 kW with torque peaking at 1600 Nm
Pivoting B-axis milling head delivering 33 kW power with speeds reaching 4000 min-1
Automatic tool changer supporting disc and chain magazines from 40 to 120 positions

WFL M40 and M40X MILLTURN High-Performance Machining Centers

Heavy-duty M40 and M40X MILLTURN multitasking machines excel in aggressive stock removal on titanium, nickel alloys, and turbine shafts. High feed forces across all linear axes combined with massive drive torque ensure peak metal removal rates without chatter.

Center distances available in modular steps of 1000, 2000, 3000, and up to 4500 mm
Turning diameter capacity between centers reaches 520 mm with rigid steady rests
Main turning spindle delivers torque ratings up to 2000 Nm and power up to 54 kW
Proprietary real-time collision prevention system WFL CrashGuard protects equipment

WFL M50 and M50-G MILLTURN Multitasking Machining Centers

The M50 and M50-G MILLTURN centers manage demanding operations for turbine rotors, aerospace parts, and long drilling components. The machine handles five-axis milling, gear hobbing, shaping, gun drilling, and internal profiling under any tool orientation.

Machining diameter capacity over the bed guideways expanded up to 670 mm throughout
Center distances configured in modular lengths spanning from 1000 mm up to 6000 mm
Spindle drive packages deliver power ratings up to 80 kW with torque up to 3600 Nm
Counter-spindle architecture on M50-G allows complete dual-ended component machining

WFL M80 and M80-G Heavy-Duty MILLTURN Centers

The M80 and M80-G MILLTURN heavy-duty centers feature extra-wide guideway spacing and minimal tool overhang to achieve supreme rigidity under heavy metal removal. The design eliminates vulnerable lower telescopic covers, routing chips straight into conveyors.

Turning diameter capacity between centers accommodates workpieces from 950 to 1100 mm
Center distances scale up to 8000 mm for massive maritime shafts and power turbines
Main turning spindle delivers torque ratings up to 5860 Nm with drive power up to 90 kW
Ergonomic front-access tool magazine handles heavy milling cutters weighing up to 35 kg

WFL M100, M120, and M150 Large-Capacity MILLTURN Centers

The premier M100, M120, and M150 MILLTURN platforms manage giant components up to 12 meters in length. A rigid 60-degree slant bed design ensures superior damping when machining internal profiles on generator rotors, landing gear, and heavy marine shafts.

Turning lengths and center distances configure up to 12000 mm for massive shafts
Workpiece swing capacity over the top slide accommodates components up to 1140 mm
Spindle drive powertrain generates up to 14000 Nm torque with 113 kW electrical output
Heavy boring bar magazine handles deep tooling up to 2500 mm long and 180 kg weight

WFL Spindle Units, B-Axis Milling Heads, and Tooling Systems

Precision motor spindles, pivoting B-axis milling heads, and hydraulic chucking systems from WFL ensure micron-level positioning. High-torque drives, integrated dynamic monitoring, and HSK or Capto tooling interfaces maintain dependable rigidity under load.

Pivoting B-axis milling and boring head offering a continuous angular range up to 220 deg
Milling spindle configurations provide rotational speeds scaling up to 4000 min-1
Integrated non-contact spindle vibration monitoring via proprietary WFL iControl unit
High-pressure coolant interfaces delivering fluid at pressures up to 350 bar to tooling

Complete one-hit machining concept for complex rotational components

The core engineering philosophy of WFL Millturn Technologies is clamp once and machine complete. By integrating heavy turning, five-axis milling, deep-hole gun drilling, and angular boring into a single setup, Millturn centers eliminate cumulative reclamping tolerances.

This configuration slashes manufacturing lead times for turbine rotors, marine crankshafts, and aircraft landing gear while maintaining sub-micron structural repeatability.

Slant bed structural rigidity and vibration-damping architecture

Heavy-duty slant bed architecture manufactured from high-grade grey mineral alloy with an optimal 60-degree angle provides dynamic vibration damping during high-power chipping.

Broad spacing between linear guideways minimizes tool overhang and thermal deformation, routing chips directly downward into high-volume scrap removal conveyors without requiring vulnerable lower telescopic guideway covers.

Continuous pivoting B-axis milling head and Hirth coupling locking

The heavy-duty turning-boring-milling unit pivots continuously along the B-axis with a travel range up to 220 degrees. For high-torque heavy turning operations, a high-precision Hirth coupling firmly locks the milling spindle into position with high clamping force.

For simultaneous five-axis profiling, torque motor direct drives maintain continuous dynamic interpolation without mechanical backlash.

Ultra-high pressure coolant systems and deep-hole drilling technology

Processing high-temperature nickel superalloys and titanium requires specialized chip breaking and cooling delivery. WFL machines incorporate ultra-high pressure coolant systems delivering up to 350 bar through the tool center.

Dedicated boring bar accommodations support deep internal hole gun drilling with high length-to-diameter ratios, accompanied by internal damping systems to eliminate regenerative chatter.

Integrated workpiece measurement and intelligent CrashGuard protection

In-process workpiece inspection utilizing Renishaw touch probes and laser tool setting systems validates critical dimensions before the component leaves the chuck.

WFL CrashGuard real-time collision prevention software models machine kinematics in real time within the CNC memory, instantly halting axis feed motions within milliseconds if an unforeseen interference is detected.

Global equipment configuration and international engineering delivery

SpareX manages the procurement, specification verification, and cross-border delivery of WFL Millturn multifunctional machining centers for manufacturing facilities worldwide.

Technical teams coordinate machine foundation layouts, electrical utility requirements, modular tool magazine capacities, and steady rest configurations to match project requirements.

WFL Millturn Technologies / MILLTURN and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WFL Millturn Technologies / MILLTURN and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.