KNIPEX / KNIPEX-Werk Professional Pliers and Replacement Components

We configure and quote KNIPEX professional pliers and KNIPEX-Werk replacement components: Pliers Wrench soft plastic protective covers, Cobra push-button assemblies, TubiX pipe cutter wheels and StepCut stepped shearing blades by tool article.

Cobra Water Pump Pliers and Hinge Repair Kits

High-tech KNIPEX Cobra water pump pliers feature push-button fine adjustment and heavy-duty box-joint design. We supply spare push-button sets, return leaf springs, hinge pivot pins and smooth plastic jaw covers.

Double guide box-joint construction provides high mechanical joint stability
Induction-hardened teeth reach approximately 61 HRC for high wear resistance
Self-locking jaw profile ensures positive grip on pipes, sleeves and hex nuts
Complete push-button hinge repair assemblies supplied by tool article number

Pliers Wrench Assemblies and Soft Jaw Covers

The KNIPEX Pliers Wrench integrates the functions of adjustable pliers and metric open-end spanners. We supply replacement soft protective jaw pads for sensitive plated fittings, hinge push buttons and pivot bolts.

Smooth parallel gripping surfaces prevent damage to plated and polished edges
Continuously variable jaw opening replaces metric and imperial spanner toolkits
High lever transmission ratio yields strong clamping pressure on components
Replacement plastic jaw protector packs supplied for delicate assembly tasks

TwinGrip Slip Joint Pliers and Spare Components

KNIPEX TwinGrip slip joint pliers feature combined front and lateral gripping zones engineered to loosen stuck fasteners. We supply push-button adjustment spare assemblies, pivot hardware and replacement springs.

Aggressive front jaw serrations securely turn stripped screws and bolt studs
Three-point side grip geometry reliably clamps flat strips and round shafts
Slender head profile grants easy access to fasteners in confined enclosures
Replacement push-button and spring assemblies restore joint clamping control

TwinForce High Performance Diagonal Cutters

KNIPEX TwinForce heavy-duty diagonal cutters feature a dual-hinged mechanism reducing cutting effort by 39 percent. We supply hinge hardware, return springs and VDE insulated component replacements by tool model.

Dual joint geometry delivers high mechanical leverage to the cutting blades
Induction-hardened cutting edges reach 64 HRC to sever hard piano wire cords
Damped cut impact protects the technician hand joints during repetitive cuts
Supplying hinge components, return springs and handles by equipment article

TubiX Pipe Cutters and Replacement Cutting Wheels

KNIPEX TubiX precision pipe cutters feature the QuickLock mechanism for fast single-handed clamping on metallic tubes. We supply replacement needle-bearing cutting wheels, pivot axles and internal deburring blades.

QuickLock one-hand sliding rail clamps cutting wheel firmly to pipe profiles
Needle-bearing tool steel wheels smoothly cut copper and stainless pipelines
Fold-out internal rotary deburrer cleanly smooths cut edges prior to jointing
Supplying spare cutting wheels 90 39 02 and guide rollers by equipment model

StepCut Cable Shears and Replacement Blades

KNIPEX StepCut cable shears utilize stepped cutting edges that divide core strands sequentially, lowering hand force by 40 percent. We supply replacement shear blades, adjustable joint screws and return leaf springs.

Stepped cutting edges sever copper and aluminium conductors without crushing
Induction-hardened blades reach approximately 56 HRC for lasting sharpness
Adjustable bolted joint maintains blade alignment and smooth shearing motion
Supplying replacement cutting blades, joint screws and springs by tool model

Part Number Identification for KNIPEX / KNIPEX-Werk Tooling

Professional pliers manufactured by KNIPEX at the KNIPEX-Werk production plant are identified by a unique multi-digit article number marked on the tool handle or forged joint.

The initial numerical pair specifies the functional category, the middle sequence denotes jaw geometry, and the final digits define overall length in millimeters.

When submitting maintenance requests for spare components, providing the complete tool article number or a legible photograph of the forged marking enables precise matching.

Our technical personnel consult factory engineering documentation to identify corresponding hinge assemblies, protective jaw sets and leaf springs.

Protective Polymer Jaw Pad Installation for Pliers Wrench

KNIPEX Pliers Wrench models feature detachable protective soft jaw covers molded from tough engineering polymer to shield decorative chrome and polished brass fittings from surface scarring.

These smooth jaw pads clip directly onto the steel gripping jaws without mounting hardware, providing resilient contact surfaces for high-torque tightening. On industrial production lines, protective covers experience mechanical abrasion over extended operating periods.

Replacing worn jaw pads with matched three-pair service sets maintains edge integrity on finished assemblies and prevents metal-to-metal contact.

Push-Button Hinge Mechanism Overhaul for Cobra Pliers

The push-button adjustment assembly of KNIPEX Cobra water pump pliers incorporates a hardened toothed insert, a heavy-duty compression spring and a pivot hinge pin.

Under repetitive heavy impact or exposure to abrasive particulate matter, internal tooth engagement can experience wear, resulting in slippage during high-torque pipe gripping. Factory replacement repair kits restore mechanical locking without replacing the tool body.

The maintenance procedure entails driving out the worn hinge pin, cleaning the double-guide joint cavity, applying industrial synthetic grease and fitting the replacement spring and button.

Cutting Wheel and Internal Deburrer Maintenance for TubiX Cutters

KNIPEX TubiX pipe cutting tools employ precision disc cutters fabricated from ball-bearing tool steel and fitted with needle roller bearings for true tracking along pipe perimeters.

The QuickLock mechanism provides rapid one-hand positioning, but clean perpendicular cutting requires an unblemished wheel edge free from nicks or burrs.

Replacing the cutting wheel involves extracting the slide retaining pin and installing a standard matching wheel for thin-walled stainless steel or copper pipelines. In addition, the fold-out internal rotary deburrer blade should be inspected and renewed whenever dulling occurs.

Blade Alignment and Fastener Adjustment for StepCut Cable Shears

StepCut cable shears feature stepped cutting blades that divide wire strands sequentially to minimize required manual force. Periodic inspection of joint clearance is essential to prevent blade spreading and conductor crushing during heavy shearing cycles.

The adjustable bolted joint with a locking nut allows service technicians to eliminate axial play and calibrate smooth scissor action.

When cutting edges show abrasive dulling after extensive electrical installation runs, both shear blades and friction washers should be replaced and torqued to factory specifications for consistent performance.

Cleaning Protocols, Joint Lubrication and Corrosion Protection

Regular maintenance preserves the mechanical action and atramentized surface finish of KNIPEX-Werk industrial hand tools. Following work shifts, equipment should be wiped clean of metallic debris, cutting fluid residues and industrial dust using lint-free cloths.

Applying several drops of low-viscosity synthetic machine lubricant into the box-joint and dual-pivot tolerances followed by multiple full-stroke actuations ensures deep penetrative coverage. Aggressive acidic solvents that degrade multi-component grip sleeves must be avoided.

Routine lubrication prevents friction wear and extends service longevity.

KNIPEX / KNIPEX-Werk and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of KNIPEX / KNIPEX-Werk and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.