Trasmil Industrial Cardan Shafts

Industrial cardan drive shafts and driveline transmissions Trasmil S.r.l. for rolling mills, heavy manufacturing machinery, conveyor lines and pumping stations: engineered component selection.

Trasmil Series 07–08 DIN Flanged Cardan Shafts

Industrial cardan shafts Trasmil series 07–08 DIN with connection flanges according to DIN standard from 58 to 480 mm. Drivelines deliver nominal torque from 320 Nm to 400,000 Nm for rolling mills, heavy conveyor systems and continuous pumping installations.

Flange connections under DIN standard with flange diameters from 58 to 480 mm
Nominal torque ratings across the transmission range from 320 to 400,000 Nm
Telescopic splined section providing compensation for continuous axial stroke
High-precision dynamic balancing performed at the Milan assembly workshop facility

Trasmil Series 07–08 SAE Cardan Shaft Assemblies

Industrial cardan shafts Trasmil series 07–08 with standardized SAE connection flanges ranging from size 1100 up to 1800. These assemblies transfer nominal torque from 700 to 25,000 Nm for processing machinery, heavy industrial compressors and mobile drivetrains.

Interface connection flanges compliant with SAE standards sized from 1100 to 1800
Continuous torque transmission ratings designed from 700 up to 25,000 Nm capacity
Compact universal joint geometry suitable for installations in restricted spaces
Custom center tube lengths engineered to match machine layout connection points

Trasmil Heavy Series 09 DIN Cardan Drive Shafts

Heavy industrial cardan shafts Trasmil series 09 DIN built for extreme mechanical duty in steel mills. Shafts transmit nominal torque from 56 kNm up to 500 kNm with flange diameters from 225 to 480 mm across rolling stands and continuous manufacturing lines.

Extreme duty torque transmission capacity delivering from 56 up to 500 kNm power
Standard DIN connection flanges spanning pilot dimensions from 225 to 480 mm
Reinforced cross journals and roller bearing units handling severe shock loads
Heavy-duty construction developed for continuous metallurgy production machinery

Trasmil Hub-Type Shaft Assemblies Series 01 and 02

Hub-mounted articulated transmissions Trasmil series 01 with pin joints and series 02 with needle bearings. These compact units provide smooth rotational power delivery at deflection angles up to 45 degrees in industrial automation lines and machine tools.

Pin joint mechanical architecture in series 01 tailored for lower-speed drives
Precision needle roller bearings in series 02 supporting elevated rotational speeds
Maximum working articulation angle accommodating deflections up to 45 degrees
Hub bore configurations available with keyway slots or involute spline profiles

Trasmil Series 07 Cross Joint Hub Assemblies

Hub-type cardan shafts and single universal joints Trasmil series 07 built around classic spider crosses. Components feature hub bores from 16 to 35 mm and quick-release executions for rapid maintenance changeovers across automated conveyor machinery.

Universal joint design utilizing precision cross spiders with needle roller kits
Hub bore mounting diameters engineered to accommodate drive shafts from 16 to 35 mm
Quick-release mechanism with spring-loaded collar for rapid machine assembly
Nominal torque transmission performance delivering ratings between 200 and 920 Nm

Trasmil Companion Flanges, Yokes and Fasteners

Precision companion flanges, universal joint weld yokes and high-tensile connection bolts Trasmil. These components provide exact spigot centering, eliminating driveline runout and protecting connected gearboxes from damaging torsional vibration stresses.

Companion matching flanges produced across all DIN and SAE standard dimensions
Precision machined centering spigots preventing radial runout along the shaft line
Calibrated high-strength fastening bolts and lock nuts for reliable connection
Forged tube weld yokes matched to standard driveline steel pipe outer diameters

Engineering design and dynamic balancing of Trasmil drive shafts

Italian manufacturer Trasmil S.r.l. has developed and built mechanical power transmission assemblies at its Milan production facility spanning over 2,000 square meters since 1984.

Industrial driveline reliability relies on high-grade alloy steel forging, precision universal joint geometry and dynamic balancing across each completed assembly on calibrated test rigs.

Factory balancing eliminates secondary vibration and radial runout during high-speed rotation, protecting gearboxes, driving motors and continuous production line machinery from bearing failure.

Flange geometry and interface standards DIN and SAE

Integrating Trasmil cardan shafts into industrial drivelines requires matching interface connection flanges and mating companion hubs. The production program incorporates standardized DIN flange dimensions with pilot diameters from 58 to 480 mm as well as SAE flange standards from size 1100 to 1800.

Flange alignment is maintained by precision cylindrical spigot registers with narrow radial tolerances, while torque transmission is secured through calibrated high-tensile connection bolts. Companion adapters and quick-release yokes allow installation without altering adjoining shaft interfaces.

Telescopic splined couplings and angular misalignment handling

Operating cardan drives on rolling mills, metallurgical roller tables and processing machinery involves continuous fluctuations in operating span and joint deflection angles.

Trasmil drive shafts feature precision telescopic splined sections with involute or straight-sided tooth profiles engineered for axial displacement under heavy torque loads.

Spline contact surfaces undergo induction hardening and low-friction polymer coating to prevent binding during peak loading, while multi-lip elastomeric seals protect the sliding assembly from scale, abrasive debris and moisture.

Bearing assemblies, cross spiders and maintenance practices

Universal joint pivots on Trasmil series 07, 08 and 09 cardan shafts feature alloy cross spiders with precision needle roller bearings enclosed in hardened chromium steel cups.

Lighter series 01 and 02 employ pin pivots and compact roller assemblies configured for operating angles up to 45 degrees in automation machinery. Pivot lifespan depends on monitoring radial and axial free play: when clearance exceeds permissible limits, spider bearing kits are replaced.

Replacement cross kits are identified from bearing cup markings or journal diameter measurements from equipment documentation.

Lubrication procedures and sealing protection for Trasmil shafts

Continuous torque transfer up to 500 kNm requires adherence to thermal thresholds and lubrication intervals specified by the manufacturer.

Trasmil universal joints and telescopic splines include grease fittings for relubrication using lithium-complex greases fortified with extreme-pressure EP2 additives. Grease is injected through the spider cross duct until emerging from all four bearing cup lip seals.

For severe operating conditions in steelworks and cement plants, protective steel slinger rings and polyurethane boots shield the driveline from grease washout and contamination.

Inspection criteria and wear monitoring for industrial drivelines

Routine maintenance of industrial drive shafts includes vibration logging during operation, checking flange bolt torque with calibrated torque wrenches, and inspecting universal joint yokes for fatigue.

Tube weld seams must show no hairline cracks, flange faces must remain flat, and splined slip joints must retain tight rotational clearance.

When excessive driveline play or bearing spalling occurs, our engineers assess the unit using nameplate photographs and drawings to arrange replacement yokes, spider kits or complete balanced shaft assemblies.

Trasmil and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Trasmil and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.