Kapego Architectural LED Luminaires, Projectors and Drivers

We identify and quote Kapego inground luminaires, underwater pool spotlights, linear wall washers, and regulated power supplies by technical specifications.

Kapego Inground LED Fixtures for Architectural Pavement and Walkways

Kapego inground luminaires deliver illumination across walkways, parking bays, and plazas. Engineered with electropolished stainless steel bezels and anodized aluminum enclosures, these watertight units withstand heavy traffic loads up to five tons with IP67 protection.

Toughened safety glass lens engineered for vehicle drive-over weight loads.
Corrosion-resistant aluminum body paired with marine grade 316L steel flanges.
High efficiency Cree and Osram emitter arrays generating up to 120 lm per watt.
Factory-sealed waterproof cable gland assemblies with thermal silicone cabling.

Kapego Submersible LED Luminaires for Fountains and Swimming Pools

Kapego submersible lighting fixtures operate in chlorinated pool water, architectural fountains, and water displays. Manufactured from grade 316 stainless steel with fluorosilicone seals, these underwater spotlights guarantee IP68 waterproof ratings down to five meters depth.

Marine grade stainless steel housing resistant to underwater pool environments.
Safe low voltage direct current operation across 12V and 24V DC power lines.
Multicolor RGBW emitter arrays with precision collimators for fountain jets.
Integrated thermal protection safeguarding diodes during accidental dry runs.

Kapego Architectural Surface and Recessed Exterior Wall Luminaires

Kapego architectural exterior wall sconces illuminate building perimeters, vertical columns, and entrance portals. Available in up-and-down and unidirectional configurations, these IP65-rated aluminum fixtures produce defined optical beam geometry without light pollution.

Dual directional optical output with independently adjustable beam shutters.
Durable thermoset powder coat finish tested against harsh coastal salt spray.
Multiple beam distribution angles ranging from narrow ten to wide sixty degrees.
Convenient rough-in mounting base featuring quick-disconnect electrical blocks.

Kapego Linear Architectural Wall Washers and Floodlight Projectors

Kapego linear flood fixtures project homogeneous vertical illumination across tall building facades, architectural friezes, and bridge spans. Equipped with tilt-lock mounting brackets and DMX512 integration, these IP66 modules enable dynamic color-changing illumination programs.

Asymmetrical and elliptical optical lenses delivering uniform vertical wash.
Extruded aluminum profile housing with integrated passive thermal cooling fins.
Full support for DMX512 and RDM addressing for dynamic lighting visual scenes.
Waterproof plug-and-play inline interconnect cabling for continuous daisy chains.

Kapego Landscape Bollard Posts and Garden Pathway Illumination

Kapego pathway bollard luminaires deliver comfortable pedestrian illumination along garden walkways, corporate campuses, and park trails. Built with cylindrical aluminum posts and shielded optical louvers, these IP65 fixtures eliminate glare while offering vandalism resistance.

Vandal-resistant extruded aluminum post structure with reinforced mounting base.
Radial downward optical reflector avoiding direct uncomfortable pedestrian glare.
Heavy-duty galvanized ground anchor plates and templates for concrete footing.
Energy efficient LED emitter arrays maintaining stable long-term white chromaticity.

Kapego Regulated LED Power Supplies and RF Lighting Controllers

Kapego regulated switching power supplies and digital controllers deliver clean 24V direct current to outdoor lighting networks. Wireless RF 2.0 receivers and DMX decoders provide smooth flicker-free pulse width modulation dimming across architectural light installations.

Regulated 24V direct current output featuring short-circuit overload shutdown.
Wireless RF 2.0 multi-zone receivers compatible with touch-sensitive wall pads.
High frequency pulse width modulation dimming avoiding visual camera flicker.
Sealed aluminum enclosure modules equipped with secure screw wiring terminals.

Kapego Inground Luminaires for Architectural Pavements and Walkways

Kapego inground lighting luminaires series deliver durable recessed illumination across urban pedestrian pavements, parking zones, and building approaches.

The structural design unites a heat-dissipating anodized aluminum rough-in enclosure with an electropolished grade 316 stainless steel surface bezel.

High strength toughened silicate glass lenses withstand vehicular static wheel loads up to five tons, while synthetic elastomer gaskets maintain verified IP67 ingress protection against rain and ground moisture.

When submitting an engineering inquiry, provide surrounding paving material specifications, desired optical beam spread, color temperature ratings, and expected vehicular traffic density.

Kapego Submersible LED Spotlights for Swimming Pools and Fountains

Kapego submersible lighting fixtures are engineered for continuous underwater operation within commercial swimming pools, reflecting ponds, public waterfalls, and dynamic musical fountains.

Fabricated from marine grade austenitic 316L stainless steel, the luminaire body resists corrosion from chlorinated sanitizers and dissolved minerals. Precision multi-lens collimator optics generate focused beam angles to illuminate water spouts and ornate fountain basins with minimal light loss.

Safe low-voltage 12V and 24V direct-current power feeds eliminate electrical hazards near water basins. When planning installation details, specify immersion depth, basin geometry, beam chromaticity, and control interfaces.

Kapego Architectural Exterior Wall Luminaires for Facade Illumination

Kapego exterior surface and recessed wall fixtures illuminate building columns, decorative piers, perimeter walls, and commercial entrance portals. Fixtures incorporate independent optical modules supporting upward and downward illumination with adjustable internal mechanical cutoff louvers.

The corrosion-resistant aluminum alloy housing is treated with electrostatic polyester powder coatings resisting solar ultraviolet degradation and weathering extremes. Verified IP65 sealing prevents moisture and windblown dust ingress.

When requesting project selection, clarify mounting height coordinates, exterior cladding texture, architectural beam requirements, and input supply voltages.

Kapego Linear Wall Washers and Flood Projectors for Facade Surfaces

Kapego linear flood fixtures provide uniform vertical illumination across vertical facade envelopes, structural bridge spans, decorative friezes, and historical landmarks.

Specialized optical collimators eliminate hot spots while providing gradual vertical brightness from ground grade up to building parapets.

The extruded aluminum profile housing features articulated mounting brackets with angle indicators for precise directional alignment during nighttime commissioning. Digital DMX512 and RDM compatibility enables synchronized multi-scene color shows.

To configure linear flood solutions, provide facade elevation height, continuous horizontal run dimensions, setback distance, and desired control protocol.

Kapego Pathway Bollards for Landscape Grounds and Garden Walkways

Kapego pathway bollards ranging from three hundred to one thousand millimeters in height deliver comfortable pedestrian guidance lighting along public park trails, garden paths, and hospitality promenades.

Shielded light engine arrays direct illumination downward onto curved optical reflectors, spreading broad ground pools without blinding oncoming pedestrians.

The heavy-duty tubular aluminum post withstands accidental impact forces, while an internal sealed junction chamber isolates electrical wire splices from soil humidity.

When requesting bollard layouts, confirm post height, spacing intervals along pathways, preferred color temperature, and concrete anchor footing specifications.

Kapego Regulated Switching Power Supplies and RF Control Modules

Kapego regulated switching power supplies and wireless controllers guarantee reliable operation and smooth dimming across exterior lighting installations.

Direct current 24V driver units incorporate multi-stage protection circuitry against short-circuits, thermal overload, and electrical mains surges.

Wireless RF 2.0 receiver modules with touch-sensitive wall pads support multi-zone grouping and high-frequency pulse width modulation dimming without video recording flutter.

When selecting power supplies and controllers, specify total electrical luminaire wattage ratings, trunk cable lengths, and site control automation integration protocols.

Kapego and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Kapego and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.