WEROCO Industrial Machinery, Structural Systems and Spare Parts

We identify and quote WEROCO industrial equipment and replacement components by drawing, standard or nameplate: machine tools, climate test chambers, TL SP 99 steel guardrails, 4.6 to 12.9 fasteners, transport racks and gates.

Machine Tools, Climate Chambers and Spare Parts

Since 1990, the WEROCO machinery export division has supplied metalworking, woodworking and plastics processing machine tools, material testing climate chambers and replacement assemblies configured to customer technical specifications.

Assemblies for metalworking, plastics processing and woodworking machine tools.
Environmental and climate test chambers for industrial material verification.
Spindle groups, drive shafts, linear guideways, sensors and wiring harnesses.
Replacement mechanical components identified by machine nameplate or drawing.

Steel Guardrail Systems and Impact Barriers TL SP 99

WEROCO steel guardrail systems manufactured to TL SP 99 technical delivery conditions protect industrial roadways, plant perimeters, structures and parking facilities. Production plants undergo regular TUV inspections three times per year.

Steel guardrail beams in Profile A and Profile B geometry compliant with TL SP 99.
Complete single and double barrier assemblies in ESP, EDSP, DSP and DDSP series.
Structural barrier units with ground sleeves and plug-in posts for bridges.
Individual repair sections and collision protection guards for plant buildings.

Industrial Fasteners and Standard Parts DIN EN ISO 9002

WEROCO supplies industrial screws, bolts and fastening hardware produced under DIN EN ISO 9002 quality management systems for heavy machinery, automotive manufacturing and structural engineering in multiple alloys and strength grades.

Screws, bolts, studs and nuts across property classes from 4.6 up to 12.9.
Manufactured from carbon steel, industrial brass and Nirosta stainless steel.
Surface treatments including hot-dip galvanized and black oxide finishes.
Fastening hardware sets tailored for heavy machinery and automotive plants.

Transport Racks, Storage Frames and Support Trestles

WEROCO transport and storage racks as well as support trestles provide secure handling, transit and vertical storage for sheet glass, window assemblies, facade panels and flat workpieces across manufacturing floors and project sites.

A-frame transport racks and warehouse storage frames for glass and flat sheets.
Heavy-duty support trestles for safe positioning of panels on industrial sites.
Replacement clamping bars, rubber protection profiles and retaining rods.
Forklift pockets, crane lifting lugs and heavy-duty caster wheel assemblies.

Industrial Gates, Fire Doors and Special Steel Doors

WEROCO supplies industrial steel gates, sectional and roller doors, smoke and fire protection assemblies, and specialized steel doors with frames engineered for manufacturing plants, laboratories, warehouses and security-sensitive facilities.

Steel gates, smoke and fire protection gates, sectional, roller and up-and-over doors.
Steel doors and frames in T-30 fire-resistant and WK2 burglary-resistant designs.
Acoustic, smoke-tight, radiation-shielded and bullet-resistant door assemblies.
Partner line assemblies and parts from Hoermann, Novoferm, Domoferm, Metex, AZ, BOS.

Architectural Hardware and Flexo Partition Systems

WEROCO provides heavy-duty door and gate hardware alongside modular Flexo partition systems, including sliding, folding and framed door structures made of aluminum, timber and safety glass for industrial and commercial buildings.

Handle sets, locks, hinges and closers from Hoppe, ECO, Vieler, Hafi, FSB, HP, Hewi.
Sliding doors, folding doors and framed partition systems in the Flexo series.
Modular shelving, cabinet and partition wall structures in aluminum and glass.
Replacement roller carriages, upper guide tracks, dampers and latch hardware.

Specifying Machine Tools, Climate Chambers and Replacement Parts

Since 1990, the machinery export division of WEROCO (based in Schoeneiche near Berlin, Germany) has supplied metalworking, woodworking and plastics processing machine tools, material testing climate chambers and replacement assemblies tailored to customer requirements.

When requesting spare parts for machine tools or environmental test chambers, please provide the machine nameplate details, serial number, year of manufacture, component drawing or spare parts manual page.

Our engineers verify mounting dimensions for spindle assemblies, linear guideways, drive shafts, heating elements, circulation blowers and temperature or humidity sensors.

Selecting TL SP 99 Steel Guardrail Systems and Impact Protection

When configuring road, bridge or industrial perimeter barriers from WEROCO, specify the required beam cross-section (Profile A or Profile B according to TL SP 99 technical delivery conditions) and system architecture: single-sided guardrail ESP, single-sided Spacer guardrail EDSP, double-sided guardrail DSP or double-sided spacer system DDSP.

For bridges, ramps and retaining structures, indicate whether ground sleeves and plug-in posts or baseplate-mounted posts are required. For maintenance after vehicle impact, individual replacement beams, energy-absorbing brackets, post spacers and building collision guards can be ordered separately.

Ordering DIN EN ISO 9002 Industrial Fasteners and High-Strength Bolts

For industrial fastening hardware used in heavy machinery, automotive assembly lines and structural steelwork, specify the applicable DIN or ISO standard number, thread diameter, pitch, overall length and mechanical property class ranging from 4.6, 5.8 and 8.8 up to high-tensile 10.9 and 12.9 grades.

Select the base alloy according to the operating environment—carbon steel, industrial brass or corrosion-resistant Nirosta stainless steel—along with the required surface finish such as hot-dip galvanizing for outdoor infrastructure or black oxide treatment for precision machine tool fixtures and tooling assemblies.

Configuring Transport Racks, Storage Trestles and Industrial Gates

To select WEROCO transport and storage racks or heavy-duty support trestles for sheet glass, window units and flat facade panels, specify the maximum panel dimensions, payload capacity and handling method (forklift pockets or crane lifting lugs).

For industrial gates (steel, sectional, roller, up-and-over, smoke and fire gates) and specialized steel doors with frames (fire-rated T-30, burglary-resistant WK2, acoustic, radiation-shielded or bullet-resistant), indicate the clear opening dimensions and partner series (Hoermann, Novoferm, Domoferm, Metex, AZ, BOS) to match replacement panels, torsion springs, frames and seals.

Distinguishing German WEROCO GmbH from Unrelated Homonyms

In international procurement, it is essential to distinguish the German company WEROCO (August-Borsig-Ring 40, 15566 Schoeneiche near Berlin, registered at Frankfurt/Oder commercial register HRB 5182, VAT ID DE137224818) from the unrelated Luxembourg service entity Weroco S.a.r.l.

located in Sandweiler, Luxembourg.

The Luxembourg company operates exclusively in local vehicle license plates, tachograph inspection, speed limiters and taxi accessories, and has no connection to German industrial machinery exports, TL SP 99 steel guardrails, DIN EN ISO 9002 fasteners or industrial door and rack systems.

Engineering Verification, Quotation Workflow and Export Logistics

Inquiries for WEROCO machinery assemblies, structural protection barriers, industrial fasteners and door hardware can be submitted with part numbers, bill-of-materials spreadsheets, technical drawings or nameplate photographs.

Following engineering verification of dimensions and material specifications, SpareX prepares an itemized commercial quotation detailing unit pricing, production lead times, export packaging standards and international freight options (sea, rail, road or air cargo) to your manufacturing plant or project warehouse.

WEROCO and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WEROCO and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.