TRENS SK metal turning machines and precision assemblies

TRENS SK metal turning machinery and replacement assemblies: universal center lathes SN 50, heavy duty lathes SN 71, SBL CNC centers, and spindle tooling.

TRENS SK: European machine tool manufacturer of turning systems and assemblies

Slovak machine tool manufacturer TRENS SK traces its heritage to 1937 and is globally recognized as former TOS Trencin. The plant delivered over one hundred thousand metalworking lathes combining rigid grey iron beds with outstanding thread cutting turning precision.

European mechanical engineering enterprise dedicated to precision turning systems
Direct continuity of manufacturing standards and design expertise from TOS Trencin
Rigid grey iron machine beds with induction hardened ways to suppress vibrations
Elevated kinematic accuracy tailored for single workpiece and batch turning jobs

Universal center lathes TRENS of the SN 32, SN 50, and SN 500 SA model series

Conventional center lathes TRENS SN 32, SN 50, and SN 500 SA perform high-precision turning operations across repair and production workshops. Machines incorporate 7.5 kW spindle motors, wide speed range gearboxes, and large bore spindles measuring 52 or 77 mm.

Expansive selection of threads spanning metric, module, imperial, and diametral pitches
Heavy-duty 7.5 kW drive motor delivering uniform torque during tough metal cutting
Detachable gap bed bridge engineered to turn large diameter flanges and bulky discs
Hardened and ground prismatic guideways delivering negligible friction degradation

Heavy duty center lathes TRENS of the SN 71, SN 710, and SUI 80 machine lines

Heavy-duty lathes TRENS SN 71, SN 710, and SUI 80 machine massive forgings, shafts, and formed blanks. The equipment handles workpiece swings up to 800 mm over bed ways, spindle bores up to 105 mm, and integrates reinforced drive motors rated from 11 to 15 kW.

Expanded workpiece turning swing over bed ways spanning 710 to 800 mm clearances
Reinforced main electric motor delivering 11 to 15 kW output with steady engagement
Heavy-duty tailstock barrel featuring extended travel to support lengthy heavy shafts
Accommodation for heavy roller rests and steady guides holding massive forgings

CNC flat bed turning machines TRENS SE 320, SE 520, SE 820, and SE 1020 Numeric

CNC turning machines TRENS SE Numeric combine ergonomic cycle controls with advanced Siemens 840D or Heidenhain control units. Machines feature digital feed servos, precision ball screws, position feedback scales, and quick-change multi-position tool turrets.

Advanced digital computer numerical controls utilizing Siemens Sinumerik platforms
Precision ground ball screws along X and Z motion axes fitted with preloaded nuts
Quick-action tooling turrets and Multifix or Parat toolholders for rapid tooling setups
Automated lubrication distributor delivering measured oil films to slide guideways

Slant bed CNC turning centers TRENS of the SBL 300, SBL 500, and SBL 700 series

High performance turning centers TRENS SBL 300, SBL 500, and SBL 700 employ rigid slant beds angled at 45 and 60 degrees for optimal chip evacuation. Centers incorporate power driven rotary tool turrets, programmable tailstocks, and continuous spindle C-axis motions.

Solid unibody slant machine structure delivering optimum rigidity and thermal control
Rotary tool turrets by Sauter or Duplomatic supporting off-center drilling and milling
High-velocity spindle cartridge assembly cooled by dedicated recirculation circuits
Fully enclosed cutting compartment matched with automatic metal chip conveyors

Spindle assemblies, headstocks, feed gearboxes, and slide tooling for TRENS

For servicing and preventive maintenance of TRENS lathes, supply lines encompass spindle roller bearings, shafts, gearbox gears, friction clutch disks, cross slide screws, wipers, and steady rests. Components adhere strictly to factory engineering manufacturing prints.

Precision radial and thrust spindle bearings delivering calibrated preloaded setups
Alloy steel transmission gears and spline shafts treated by induction hardening runs
Multi-plate friction clutch packs, brake linings, and gear selector detent mechanisms
Leadscrews, bronze split nuts, carriage gib strips, and roller contact steady rests

Heritage of TOS Trencin and modern machine tool engineering by TRENS SK

Slovak mechanical engineering manufacturer TRENS SK established its industrial history in 1937, initially fabricating aero equipment before specializing in metalworking machine tools throughout the early 1950s.

Operating across decades under the renowned enterprise name TOS Trencin, the plant built global reputation as an established producer of dependable universal turning machinery delivering over one hundred thousand units to eighty nations worldwide.

The engineering philosophy of TRENS centers upon solid unibody grey iron machine beds, induction-hardened guideway systems, and high-precision spindle bearings.

Currently the enterprise maintains modern turning equipment platforms while delivering engineering replacement assemblies that fully restore original kinematic runout precision and workpiece surface finish.

Universal center lathes of the SN series: kinematics and thread cutting

Lathe series SN 32, SN 50, and SN 500 SA represent an international benchmark for conventional metal turning machinery operating within toolrooms and maintenance workshops.

Machine construction relies upon a rigid frame featuring induction-hardened prismatic guideways that maintain dimensional stability against static and dynamic forces encountered during heavy cutting runs.

The headstock transmission delivers an expansive range of spindle speeds while the feed gearbox enables direct execution of metric, module, imperial, and diametral threads without complicated gear train swaps.

High carriage rigidity suppresses unwanted vibration harmonics, securing uniform workpiece tolerances and fine surface Ra values.

Heavy duty center lathes SN 71, SN 710, and SUI 80 for large forgings

Engineered to machine bulky stepped shafts, heavy hydraulic cylinders, substantial flanges, and large formed blanks, TRENS developed the heavy-duty center lathe lines SN 71, SN 710, and SUI 80.

These machines feature high-power main drive motors delivering 11 to 15 kW output, maintaining steady high torque across low spindle rotational speeds.

The main spindle incorporates a generous bore clearance up to 105 mm to accommodate long industrial bar stock and tubing.

A reinforced tailstock assembly with an extended travel barrel provides dependable axial clamping against massive workpieces, while optional roller steady rests prevent workpiece deflection during prolonged metal removal.

CNC flat bed turning machines SE Numeric: control ergonomics and accuracy

The TRENS SE 320, SE 520, SE 820, and SE 1020 Numeric series bridges manual control flexibility with high-productivity automated contour turning.

The machines integrate modern computer numerical control systems by Siemens Sinumerik and Heidenhain, supporting graphical shopfloor conversational programming and standard canned cycles.

Axis motions along X and Z coordinates utilize precision ground ball screws fitted with preloaded double nuts to eliminate backlash during motion reversals.

Digital servo motors deliver stable feed rates, while an automatic central lubrication distributor meters uniform oil films to sliding contact surfaces, preventing premature mechanical wear.

Slant bed CNC turning centers of the SBL series: dynamics and tooling

Tailored for batch manufacturing of complex turned parts, TRENS builds high-performance slant-bed turning centers within the SBL 300, SBL 500, and SBL 700 lines.

The rigid unibody frame angled at 45 and 60 degrees delivers balanced force distribution, superior thermal stability, and unobstructed gravitational chip evacuation away from moving axes.

These turning centers incorporate heavy-duty Sauter or Duplomatic rotary turrets with driven live tool stations and a continuous spindle C-axis, allowing combined turning, keyway milling, and transverse hole drilling in a single setup.

A fully sealed safety enclosure prevents coolant fluid atomization into the surrounding workspace.

Spindle cartridges, transmission gearing, and slide maintenance tooling

Continuous long-term reliability of TRENS machine tools is sustained through scheduled replacement of wearable friction components and mechanical drive elements.

Available maintenance hardware includes dual-row cylindrical roller spindle bearings with tapered bores, calibrated preload shims, spline shafts, and hardened alloy transmission gears.

The tooling portfolio also incorporates Multifix and Parat quick-change toolposts, slide gib adjustments, cross slide leadscrews paired with bronze split nuts, multi-jaw chucks, roller rests, and polyurethane wipers that prevent metal chips from entering precision guide ways.

TRENS SK and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of TRENS SK and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.