Industrial Lubricants and Machine Oils Burrenkopf

Industrial lubrication fluids and machine oils Burrenkopf: HLP and HVLP hydraulic lines, CLP and PAO gear lubricants, CGLP slideway oils, and VDL compressor chemistries.

Mineral and high viscosity hydraulic oils H.o.B-Hydrauleum HLP and HVLP

Industrial hydraulic fluid formulations within the HLP and HVLP families protect high pressure plant pumps, molding units and stamping presses. The fluid maintains a tough boundary film under loads above 350 bar while shielding precision spool valves from abrasive friction.

Kinematic viscosity ratings from ISO VG 5 through 220 under DIN 51524 Part 2
High viscosity index formulations of the HVLP grade for outdoor ambient shifts
Verified compliance with industrial pump criteria of Denison HF-0 and HF-2
Rapid water separation behavior combined with swift release of entrained air

Ashless and food industry hydraulic fluids H.o.B-Hydrauleum HLP-S and AW

Specialty fluid compositions in the HLP-S line eliminate zinc and metallic additives to prevent sludge accumulation in fine servo valves of automated machining centers. The Hydrauleum AW product line uses refined base fluids tailored for conveyors and food packaging machinery.

Ashless chemistry without zinc protects bronze bushings and silver alloy parts
Fully compliant with NSF H-1 guidelines and standards of FDA 21 CFR 178.3570
Exceptional micro filtration performance through three micron filter elements
Chemical compatibility with standard nitrile rubber NBR and Viton FKM seals

Industrial gear lubricant formulations H.o.B-Lubricaleum CLP, PAO and PGLP

The Lubricaleum product family features mineral CLP fluids alongside synthetic polyalphaolefin (PAO) and polyglycol (PGLP) chemistries. These lubricants service heavy duty spur, helical, bevel and planetary gearboxes operating in steel rolling mills and industrial material hoists.

Viscosity grades spanning ISO VG 68 up to 680 in line with DIN 51517 Part 3
Substantial load bearing capability passing the FZG gear scuffing stage 12
Synthetic PAO formulations operating from minus 40 up to plus 150 degrees C
Polyglycol PGLP fluids for worm drive sets to minimize sliding friction heat

Machine tool slideway lubricants H.o.B-Lubricaleum CGLP

Lubricaleum CGLP formulations eliminate jerky stick-slip vibration across machine tool ways during slow micro feeding cycles. Strong surface adhesion and demulsifying additives prevent water-soluble cutting fluids from stripping the oil layer, protecting surface finish parameters.

Available in ISO VG 32, 46, 68, 100, 150 and 220 under DIN 51502 specifications
Compliant with requirements defined by Cincinnati Machine specification P-53
Repels water based cooling emulsions preventing oil wash off along the ways
Corrosion protection across ground ferrous and synthetic machine bed guides

Compressor and turbine lubricants H.o.B-Lubricaleum VDL and Turbinenöl TDL

Lubricaleum VDL formulations lubricate reciprocating, screw and rotary vane compressors encountering air discharge temperatures up to 220 Celsius. The TDL turbine product line delivers anti-oxidation stability to guard high speed turbine bearings against varnish sedimentation.

Viscosity span from ISO VG 22 up to 320 complying with DIN 51506 VDL criteria
Low carbon forming tendency across discharge valves and air receiver systems
Turbine oil TDL meeting DIN 51515 for extended service life in power plants
Swift air separation preventing foaming and corrosion inside oil reservoirs

Industrial greases, metalworking fluids and service chemicals Burrenkopf

The Burrenkopf lubricating grease range incorporates lithium, aluminum and synthetic thickeners such as polyurea, bentonite and PTFE for assemblies facing temperatures up to 250 Celsius. The assortment includes neat cutting oils, drawing fluids and industrial workshop cleaners.

Water wash off resistance and shear stability under persistent mechanical shake
Non melting bentonite and PTFE formulations designed for drying oven bearings
Water soluble and neat cooling fluids for high speed turning and deep drilling
Pumpability across centralized progressive lubrication networks like Lincoln

German lubricant engineering tradition and Burrenkopf enterprise history

German enterprise H.O. Burrenkopf & Co. Schmierungstechnik headquartered in Cologne has specialized in formulating and blending high performance lubricants for heavy industry for over seven decades.

Founded in 1945, the lubrication enterprise established benchmark manufacturing protocols aimed at reducing mechanical friction across industrial plant machinery.

In 2020, the company celebrated seventy five years of continuous growth across European markets, joining energy group Knauber Mineralol GmbH & Co. KG based in Bonn in late 2023.

The centralized logistics facility in Wachtberg maintains rigorous quality inspection procedures for every production batch of industrial machine fluid before distribution.

Hydraulic fluid categorization of H.o.B-Hydrauleum and viscosity selection

The industrial fluid lineup within H.o.B-Hydrauleum HLP spans a complete kinematic viscosity range from ISO VG 5 through 220 under DIN 51524 Part 2 standards.

Highly refined base fluids paired with an antiwear additive package prevent metal scuffing across high pressure piston pumps and directional spool valves operating at circuit pressures exceeding 350 bar.

For production equipment operating under fluctuating ambient shop temperatures, the high viscosity index HVLP product line delivers reliable shear resistance.

Furthermore, automated machining centers utilize ashless and zinc free HLP-S fluids that prevent fine particulate sludge deposits from accumulating inside precision proportional servo manifolds.

Lubricaleum industrial gear fluids: mineral CLP versus synthetic PAO and PGLP

Industrial gearboxes on metal rolling mills, heavy duty haulage conveyors and polymer extruders withstand intense tooth contact pressures during operation.

The mineral fluid line H.o.B-Lubricaleum CLP incorporates sulfur phosphorus extreme pressure additives that pass the demanding FZG gear test rig evaluation at mechanical failure stage twelve.

When operating under thermal conditions exceeding 100 degrees Celsius and inside enclosed worm drives, engineering teams specify synthetic Lubricaleum PAO polyalphaolefin or Lubricaleum PGLP polyglycol formulations.

Synthetic base fluids diminish internal hydrodynamic friction, mitigating micro pitting and flank fatigue across surface hardened gear teeth.

Slideway lubrication principles for machine tool ways using CGLP formulations

Precision metal cutting operations on milling and grinding machines demand smooth traversing movement of heavy slides without stick slip jerky behavior.

Specialized machine way oils within the H.o.B-Lubricaleum CGLP series under DIN 51502 exhibit polar adhesion to build an enduring fluid film across ferrous metal and synthetic polymer guide ways.

Surface active additives suppress vibration during slow micro feeding cycles while guarding bed surfaces against corrosion from water soluble cutting emulsions.

The fluid rapidly separates aqueous coolant mixtures, preventing stubborn sludge residue from building up along machine way wipers and slide carriages.

Compressor and turbine lubrication technology for continuous plant operations

High pressure gas boosters and industrial air compressors impose severe thermal demands on circulating lubrication films.

Machine fluid grades in the H.o.B-Lubricaleum VDL line meet DIN 51506 standards, withstanding compressor air discharge temperatures up to 220 degrees Celsius while resisting carbon build up on reciprocating valve discs.

For power generation turbine sets and heavy circulating oil networks, the H.o.B-Turbinenol TDL line complies with DIN 51515 specifications.

The formulation delivers rapid water separation from steam condensate, hydrolytic stability and foam suppression, safeguarding hydro dynamic journal bearings during continuous operation throughout demanding plant production campaigns.

Engineering conversion protocol to Burrenkopf lubricants and fluid condition monitoring

Switching industrial machinery over to alternative lubricant formulations requires preliminary chemical compatibility analysis of residual oil films and additive chemistries.

Transitioning from conventional mineral oils to synthetic polyglycol PGLP fluids demands thorough reservoir flushing and validation of synthetic seal elastomer compatibility.

Routine plant fluid condition monitoring encompasses periodic measurement of kinematic viscosity, total acid number TAN, metallic wear debris and moisture contamination.

Scheduled parameter tracking enables proactive predictive maintenance schedules, extending the operating overhaul life of capital manufacturing machinery.

Burrenkopf and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Burrenkopf and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.