Tsukasa Electric Geared Motors and Fluid Pumps

Industrial drive solutions from Tsukasa Electric for banking ATMs, automated vending kiosks, and analytical fluid handling: brushed and brushless TG motors, All-in-one units, and PT pumps.

Tsukasa Electric TG series DC brushed geared motors and compact drive units

Tsukasa cylindrical geared motors across TG-47, TG-05, TG-30, TG-87, and TG-101 series provide dependable continuous operation in precision dispensing equipment. Five-slot armatures guarantee smooth motion without torque ripple, while precision gearheads minimize output shaft play.

Five-slot brushed armature topology for stable rotation across low output velocity bands
Multi-stage metallic gear train delivering extended operational durability under load
Nominal working potentials of 12 V and 24 V direct current for automation controllers
Slim cylindrical housing profile spanning 16 to 42 mm for compact cabinet integration

Tsukasa Electric TG-22 and TG-609 series inner-rotor brushless DC motors

Tsukasa brushless motors spanning TG-22, TG-611, TG-55, TG-503, and TG-609 series deliver reduced rotational inertia and low acoustic emission. The inner-rotor architecture coupled with precision ball bearings ensures high mechanical efficiency during heavy-duty multi-shift cycling.

Inner-rotor topology with rare-earth magnets delivering fast dynamic loop response
Precision Japanese ball bearings offering extended rotation durability across cycles
Minimal electromagnetic interference and dampened mechanical vibration during run
Flexible power range spanning 1.6 to 30 W for analytical and fluid dosing apparatus

Tsukasa Electric All-in-one integrated brushless motors with built-in driver

Tsukasa All-in-one motors including TG-631, TG-55LA, TG-609AA, and TG-609CA integrate intelligent driver electronics within the motor housing. Velocity adjustment is governed via incoming PWM commands, eliminating the requirement for external cabinet-mounted speed controller modules.

Integrated control board processing incoming PWM signals for exact velocity tuning
Internal protection circuitry guarding against current spikes and reverse polarity
Direct directional commutation, start, and stop logic triggered by digital inputs
Reduced package envelope minimizing necessary footprint within compact machinery

Tsukasa Electric PT-DBLP, PT-EP, and PT-DBAN series peristaltic tube pumps

Tsukasa peristaltic pumps across PT-DBLP1, PT-DBAN1, PT-EP1, and PT-EP2 series deliver precise micro-dosing for pure and aggressive fluids. Transported liquid contacts only the inner tube lumen, preventing fluid contamination while isolating pump mechanical drive parts from liquid.

Peristaltic rotor head with precision rollers delivering consistent pulse-free flow
Quick-exchange tube cartridges made from chemically inert silicone and fluoro polymers
Accurate volumetric throughput tuning spanning fractions of a milliliter up to a liter
Valveless and seal-free layout completely preventing leakage and fluid contamination

Tsukasa Electric TG-85-PU and TG-30-PU series compact gear and vane pumps

Tsukasa miniature gear pumps across TG-85E-PU-DB4 and TG-30S-PU-DB series feature engineering polymer fluid housings for circulation tasks up to 95 degrees. Pump heads produce steady discharge pressure coupled with high wear resistance across meshing gears throughout operation.

Corrosion-resistant polymer pump housing engineered for water and neutral solutions
Precision gear teeth engagement minimizing hydraulic pulsation throughout the fluid loop
Continuous fluid working thermal limit reaching 95 degrees Celsius inside the circuit
Integrated direct-current motor drive delivering minimal electric draw on startup

Tsukasa Electric linear and rotary actuators and TCP series motor drivers

Tsukasa electromechanical linear actuators and dedicated TCP series motor drivers automate locking mechanisms, dispenser carriages, and note validators. Integrated limit switches and position sensors ensure exact stroke termination at specified boundary endpoints under duty.

Spindle screw transmission mechanism converting motor torque into linear stroke
Built-in limit switches executing automated cutoff at stroke boundary positions
Dedicated TCP series driver boards managing independent multi-channel control
Widespread implementation in banking ATMs, automated vending, and laboratory units

Gear train kinematics and spur gear reduction across TG brushed motor lines

Tsukasa Electric brushed direct-current motors across TG-47, TG-05, TG-30, and TG-87 series pair with multi-stage metal cylindrical reduction gear trains.

A five-slot armature minimizes torque ripple across output shafts, ensuring stable rotation for document transport rollers and precision feeder mechanisms.

Wear-resistant bronze and alloy steel spur gears operate with synthetic grease lubrication formulated for the complete designed service lifespan of the drive unit.

Direct mounting of the gearhead onto the motor end-bell flange establishes precise shaft concentricity and eliminates mechanical runout during high-duty cycling.

Dynamic responsiveness and operational lifespan of inner-rotor BLDC drives

Tsukasa brushless motors spanning TG-22, TG-611, TG-55, TG-503, and TG-609 series employ an inner four-pole or multi-pole rotor layout. Rare-earth permanent magnets yield minimal rotational inertia, enabling rapid velocity ramp-up without winding overheating.

The absence of mechanical commutator brushes eliminates electrical sparking, lowers acoustic decibels, and curtails electromagnetic disturbance across adjacent analytical electronics in medical or laboratory devices.

Precision shielded ball bearings handle continuous axial thrust and radial forces across demanding automation schedules.

Integrated velocity regulation and onboard electronics in All-in-one models

The Tsukasa All-in-one drive range unifies a brushless motor and intelligent electronic control board within a single compact cylindrical housing. Series TG-631, TG-55LA, and TG-609AA accommodate smooth velocity regulation via incoming PWM pulses delivered from host machine controllers.

Built-in protection circuits prevent thermal damage from overcurrent during mechanical stall events and guard against unintended reverse polarity connections.

Eliminating external cabinet-mounted driver units streamlines internal wiring and reduces electrical enclosure dimensions in automation machinery.

Peristaltic liquid transport principles and elastomer tube selection guide

Tsukasa Electric peristaltic tube pumps across PT-DBLP1, PT-DBAN1, and PT-EP1 series deliver high-accuracy continuous or metered dispensing for chemical fluids.

Driven rollers progressively compress an elastic tube within the pump head, advancing a sealed bolus of fluid without pulsations or mechanical lubricant contact.

Modular quick-release tube cartridges made from chemically inert silicone or fluoro elastomers simplify scheduled tube replacement during fluid changeovers or planned plant maintenance routines on automated manufacturing stations.

Polymer fluid chamber construction across TG-PU high-pressure gear units

Tsukasa miniature gear pumps including TG-85E-PU-DB4 and TG-30S-PU-DB incorporate thermal-resistant engineering polymer pump chambers rated for liquid loops up to 95 degrees Celsius.

Precision gear teeth profiles deliver constant output pressure without volumetric fluctuations across closed circulation and cooling systems. The integrated direct-current motor delivers elevated breakaway torque while maintaining low power consumption under continuous run.

An integrated bypass relief valve protects fluid piping and gear teeth from excess hydraulic pressure spikes.

Preventive maintenance routines and mechanical drive reliability guidelines

Structured maintenance for Tsukasa electromechanical equipment involves periodic inspection of commutator brush wear, examination of peristaltic pump tubes, and verification of minimal backlash across gear reduction pairs.

Supporting non-stop plant productivity is assisted by maintaining vital wear items and spare tube assemblies at your facility warehouse.

Timely component renewal ahead of critical wear limits prevents unexpected assembly line shutdowns and preserves calibrated fluid dosing accuracy across machinery life cycles.

Tsukasa Electric and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Tsukasa Electric and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.