Samchully CNC Power Chucks, Rotary Hydraulic Cylinders & Workholding

Factory-direct international supply of authentic Samchully Machinery open-center power chucks HS, rotary cylinders S/SH, CNC rotary tables HR, and steady rests.

Samchully HS, HCH, HCL Open-Center and HHO Closed-Center Hydraulic Power Chucks (HS-04 through HS-24 Series)

Samchully Machinery Co., Ltd. open-center and closed-center hydraulic power chucks serve as premier OEM workholding solutions across modern CNC turning centers (Hyundai WIA, DN Solutions, Haas, and Mazak).

The flagship HS series encompasses 2-jaw, 3-jaw, and 4-jaw wedge-type hydraulic chucks ranging from 4-inch to 24-inch diameters, engineered for high-throughput turning of round bars and billets.

Chuck bodies are forged from chrome-molybdenum alloy steel, through-hardened and ground to exceed 60 HRC across slideways, eliminating elastic deformation.

The balanced wedge mechanism translates draw tube thrust into radial gripping forces reaching 245 kN while preserving total runout within 0.015 mm.

For oversized components requiring deep stroke engagement, HCL extended-stroke models provide maximum clearance, while HHO solid-body chucks optimize rigid clamping in blind-hole chucking tasks.

Broad envelope options: body diameters from 110 mm (HS-04) to 610 mm (HS-24) fitting spindle noses A2-5 through A2-15
High-speed turning thresholds: dynamic mass balancing permits sustained continuous machining speeds up to 6,000 RPM
Substantial gripping capability: advanced wedge mechanics produce clamping forces spanning 35 kN up to 245 kN on HS-24
Universal serration standard: master jaw serrations configured at 1.5 mm x 60° and 3.0 mm x 60° for interchangeability

Samchully Rotary Hydraulic Cylinders: Through-Hole S, SH, SY, SS Series & Solid Y, YH, YS Series (S1246, S1552, S1875, S2091)

Samchully Machinery rotary hydraulic cylinders provide responsive actuation for open-center power chucks and collet systems on CNC turning centers. The hollow S and SH series incorporate through-bore diameters from 36 mm to 165 mm, accommodating continuous bar feeding through the spindle.

Lightweight alloy and forged steel bodies with micro-finished rotary fluid sleeves minimize rotational inertia. Dual integral pilot-operated check valves lock holding pressure within cylinder chambers during sudden power loss or hose rupture, preventing workpiece ejection.

External proximity switches with micrometer-adjustable mounting rails interface directly with machine PLC controls to confirm clamped and unclamped status before cutting cycles begin.

Broad bore diameter range: through-holes from 36 mm (S1036) to 165 mm (S2516) matching standard bar feeders
Uncompromising clamp security: built-in check valves maintain hydraulic gripping pressure during sudden outages
Precise stroke verification: adjustable proximity switches ensure reliable closed-loop CNC status reporting
Rugged pressure capability: rated operating pressures up to 4.5 MPa with rotational limits reaching 7,000 RPM

Samchully 4th-Axis Rotary Tables HR, HDR, HLR Series & 5th-Axis Tilting Tables TR, TDR, DDR Series (HR-170, HR-210, HR-255, HR-320)

Samchully Machinery CNC rotary tables deliver 4th-axis indexing and simultaneous 5th-axis contouring capabilities to milling machining centers.

The HR and HDR series 4th-axis tables feature precision dual-lead worm and wheel drive assemblies engineered from high-strength phosphor bronze and surface-hardened alloy steel, delivering index accuracies within 15 arc-seconds and repeatability under 4 arc-seconds.

Heavy-duty hydraulic and pneumatic disc clamping systems generate holding torques up to 3,200 Nm, eliminating rotary platter micro-movement during aggressive rough-milling operations on hardened tool steels.

For complex aerospace impellers and turbine blisks, TR and TDR tilting-rotary tables paired with direct-drive DDR torque motor configurations enable multi-axis machining with platter velocities reaching 200 RPM, seamless tool clearances, and zero gear backlash.

Versatile platter sizes: faceplate diameters of 170 mm, 210 mm, 255 mm, 320 mm, and 500 mm with ground T-slots
Rigid clamping mechanisms: hydraulic braking forces up to 3,200 Nm prevent angular deflection under heavy cuts
Exceptional spatial accuracy: indexing accuracy within 15 arc-seconds with optional circular scale integration
Broad CNC controller compatibility: pre-engineered cabling and motor interfaces for Fanuc, Siemens, and Mitsubishi

Samchully Hydraulic Self-Centering Steady Rests: SLU, SRU Series & Side-Cylinder SLUB Series for CNC Lathes

Samchully Machinery hydraulic self-centering steady rests (SLU and SRU series) provide stable support during high-precision turning and cylindrical grinding of long shafts and tubular components prone to cutting deflection.

The synchronized three-point lever kinematic design automatically maintains concentricity along the lathe spindle centerline across gripping diameters from 4 mm to 460 mm without manual intervention.

Clamping arms feature hardened roller bearings running on needle cages, accommodating peripheral workpiece surface speeds up to 900 m/min while safeguarding finely ground bearing journals from marring.

Coolant flush ports deliver high-pressure fluid directly over roller contact zones, while an air barrier keeps internal mechanisms free of metal swarf. The compact SLUB series incorporates a side-mounted actuating cylinder, optimizing critical turret tool clearances.

Expansive clamping diameters: gripping capacities spanning 4 mm to 460 mm across SLU-1 through SLU-5 models
High centering accuracy: repeatable self-centering precision within 0.005 mm eliminates shaft runout during turning
Severe environment sealing: integrated pneumatic swarf barrier and automated metered lubrication to roller pins
Space-saving machine envelope: SLUB side-cylinder configurations maximize longitudinal bed travel on CNC lathes

Samchully Precision Machine Vices: Mechanical & Hydraulic PV, MC, MPV, MH Series & 5-Axis Self-Centering CV Series

Samchully Machinery precision machine vices deliver workholding rigidity across vertical machining centers and multi-axis milling platforms.

Vice beds are machined from high-tensile nodular ductile iron or normalized alloy steel, flame-hardened along ground guideways to 55–60 HRC to maintain squareness and parallelism tolerances within 0.01 mm over extended service lives.

PV series mechanical vices and MH hydra-mechanical models incorporate the patented Multi-Power force multiplier mechanism, enabling operators to achieve repeatable holding forces up to 80 kN through manual handle rotation without requiring external hydraulic packs.

The semi-spherical anti-lift jaw mechanism directs dynamic gripping vectors downward, preventing upward workpiece tilt during heavy face-milling cuts, while the compact CV 5-axis self-centering vice line provides elevated jaw heights for unimpeded multi-angle tool clearance.

Substantial gripping force: Multi-Power mechanical and hydraulic boost systems generate clamping forces up to 80 kN
Down-thrust anti-lift geometry: dynamic jaw segments suppress upward part displacement during heavy milling
Standard jaw configurations: jaw widths available in 100 mm, 130 mm, 160 mm, and 200 mm with openings over 400 mm
Optimized 5-axis CV models: concentric self-centering mechanism offering maximum spindle accessibility

Samchully High-Speed Collet Chucks: Quick-Change QC Series & Fixed-Length CR, DC Bar Chucking Systems

Samchully Machinery collet chuck systems (CR, QC, and DC series) deliver high-speed workholding performance tailored for bar-fed CNC turning centers and multi-tasking lathes.

Compared with conventional jaw chucks, collet chuck bodies feature minimized mass and symmetrical radial profiles, decreasing centrifugal force loss and enabling sustained spindle rotation velocities up to 7,000 RPM.

The advanced QC Quick-Change mechanism allows operators to switch collet segments within seconds using a manual changeover fixture without removing the chuck body from the spindle nose.

The CR fixed-length design incorporates a push-to-close collet sleeve geometry that eliminates axial part displacement during clamping, ensuring strict workpiece shoulder length tolerances during automated bar feeder cycles.

Collet chucks mount directly onto A2-5, A2-6, and A2-8 spindle noses, accepting standard DIN 6343 161E, 173E, and 185E collets.

Elevated rotational speed thresholds: balanced body dynamics support continuous spindle operations up to 7,000 RPM
Rapid changeover tooling: QC Quick-Change mechanisms enable complete collet replacement in under 15 seconds
Zero axial part shift: stationary workpiece stop geometry preserves strict longitudinal part positioning
Standard direct spindle mounting: pre-machined mounting recesses fit ANSI A2-5, A2-6, and A2-8 spindle noses

Samchully Replacement Chuck Jaws: Standard & High Soft Jaws SB, HB Series & Hard Step Jaws HJ, SHJ Series

Samchully Machinery precision replacement chuck jaws (SB, HB, HJ, and SHJ series) provide rigid torque transmission from chuck master slides onto precision turned components.

Unhardened soft jaws (SB and HB series) are machined from normalized S45C carbon machinery steel, allowing machinists to bore dedicated circular contours in situ under live clamp pressure, delivering part runouts under 0.01 mm across critical mounting diameters.

Extended-height soft jaws (reaching up to 150 mm) support oversized step faces and long shafts, while lightweight high-tensile aluminum jaws slash centrifugal gripping force attenuation on high-RPM spindle programs.

Hardened step jaws (HJ and SHJ series) are hot-forged from SCM440 chrome-molybdenum alloy steel and induction hardened to 58–62 HRC across aggressive serration teeth, embedding firmly into mill scale on hot-rolled bars and forged billets to withstand extreme cutting moments without slipping.

Comprehensive profile library: standard, pointed, wide pie-jaw, and extra-tall soft jaw geometries fitting 5" through 24" chucks
Precision master jaw interface: ground serration pitches of 1.5 mm x 60° and 3.0 mm x 60° complying with ISO chuck mounting standards
Task-specific metallurgy: malleable S45C steel for custom boring, hardened SCM440 alloy for roughing, and structural aluminum alloys
Broad brand compatibility: direct dimensional interchangeability across Samchully, Kitagawa, Auto Strong, and SMW-Autoblok chucks

Samchully Specialized Workholding Accessories: Draw Tubes, Spindle Adapter Flanges, T-Nuts & Seal Overhaul Kits

To guarantee continuous operational performance across CNC lathe clamping systems, Samchully Machinery supplies a comprehensive suite of genuine connecting components and maintenance rebuild kits.

Precision alloy steel draw tubes and connecting rods transmit axial thrust from hydraulic cylinder pistons directly into chuck wedge bodies with strict dynamic balancing to safeguard machine spindle bearings.

Spindle adapter mounting plates and intermediate flanges facilitate retrofitting Samchully power chucks onto varied international spindle mount standards compliant with ISO 702-1 (including ASA A2 and Camlock D configurations).

Precision ground T-nuts and Grade 12.9 high-tensile cap screws secure top jaws onto master slide serrations, resisting thread stripping under maximum torque specifications.

For preventative maintenance intervals, Samchully supplies OEM hydraulic cylinder seal overhaul kits, rod wipers, splash covers, and pressure test gauges.

Engineered draw tubes: precision-threaded seamless alloy steel tubes customized to specific spindle lengths
Spindle adapter flanges: precision mounting faceplates accommodating A2-4, A2-5, A2-6, A2-8, A2-11, and Camlock spindle noses
High-tensile clamping fasteners: hardened T-nuts and Grade 12.9 jaw attachment screws built for maximum torque ratings
OEM service rebuild kits: genuine NBR/FKM hydraulic seal rings, guide bushings, and replacement check valves

Precision Mechanical Kinematics, Metallurgy & Workholding Rigidity

Samchully Machinery Co., Ltd. workholding systems and machine tool accessories are engineered to sustain intensive, continuous multi-shift production regimes across high-speed CNC turning and milling centers worldwide.

Core mechanical reliability across the HS power chuck line and S-series rotary hydraulic cylinders is anchored in heavy-section forgings of high-tensile chrome-molybdenum alloy steel (SCM440) subjected to deep core normalization.

Master jaw slideways and precision internal wedge surfaces undergo high-frequency induction hardening to 60–62 HRC followed by CNC coordinate grinding, preventing micro-galling and maintaining consistent radial concentricity over millions of clamping cycles.

The balanced wedge-plunger geometry optimizes force transmission from hydraulic drawbars into radial gripping vectors while minimizing sliding friction losses.

Dedicated high-pressure lubrication ports distribute grease directly into internal bearing ways, preserving gripping retention at top spindle velocities.

Hydraulic System Integrity, Integral Safety Check Valves & CNC Interlocks

Operational safety in high-speed rotary workholding is paramount for modern automated manufacturing cells. Samchully Machinery S and SH series through-hole rotary hydraulic cylinders integrate dual pilot-operated check valves engineered directly into the rotating cylinder body.

In the event of sudden hydraulic pump failure, pressure line dropouts, or power interruptions, the pilot check valves lock operational hydraulic pressure inside the piston chambers, preventing workpiece slippage or ejection under maximum spindle centrifugal forces.

Precision inductive proximity switches mounted along adjustable exterior brackets interface seamlessly with machine tool CNC controllers (Fanuc, Siemens Sinumerik, Heidenhain, Mitsubishi), verifying definitive clamped and unclamped piston stroke positions before spindle acceleration can initiate.

High-Accuracy Machine Kinematics: 4th & 5th-Axis Tables and Self-Centering Steady Rests

Samchully Machinery HR, HDR, and TR series CNC rotary tables enable simultaneous 4-axis and 5-axis machining of complex aerospace impellers, turbine blades, and precision dies on standard vertical machining centers.

The dual-lead worm and wheel drive system features ground phosphor-bronze wheels paired with induction-hardened alloy worms, allowing precise backlash adjustment without mechanism disassembly.

A powerful disc brake develops clamping torques up to 3,200 Nm, eliminating rotary platter deflection during aggressive rough-milling cuts.

For long shafts and tubular workpieces, Samchully SLU hydraulic steady rests provide rigid three-point self-centering support, maintaining center alignment with spindle axes to within 0.005 mm while internal air curtains prevent ingress of swarf and abrasive grinding sludge.

Workholding Optimization: Chuck Jaws, Collet Chucks and Connecting Hardware

Selecting the correct chuck jaws and collet configurations ensures workpiece dimensional accuracy and tool clearance.

Soft jaws (SB and HB series) machined from malleable S45C carbon steel are bored directly on the lathe spindle under active hydraulic pressure, providing complete circumferential contact and part runout within 0.01 mm.

Hardened step jaws (HJ series) feature aggressive induction-hardened serrations that bite securely into hot-rolled scale and forged billets for heavy-duty roughing cuts.

For high-speed bar turning up to 7,000 RPM, Samchully CR and QC collet chucks minimize rotating mass and eliminate centrifugal jaw force attenuation. The CR fixed-length design prevents longitudinal part displacement during clamping, ensuring strict shoulder length tolerances on bar-fed parts.

Turnkey International B2B Supply of Authentic Samchully Machinery Products

Equipguo provides direct international export supply of genuine workholding equipment, power chucks, rotary hydraulic cylinders, rotary tables, and original replacement components manufactured by Samchully Machinery Co., Ltd. for machine tool builders and production facilities worldwide.

Equipment selections are cross-referenced directly against machine spindle noses (ANSI A2-5, A2-6, A2-8, A2-11), bar capacity specifications, and original manufacturer part numbers.

Equipguo supports industrial customers with multi-currency trade financing, compliant export customs clearance, and global air and sea freight logistics delivered directly to customer manufacturing plants.

Equipment pricing, delivery schedules, and minimum order quantities for Samchully components are quoted upon specific commercial inquiry; open price lists are not published.