Tronzadoras MG Sawing Machinery and Cutting Systems

Industrial cutting machinery from Tronzadoras MG for aluminium, steel, and structural PVC framing: TL circular miter saws, DUO double miter saws, GAA automated cutting lines, and K metal bandsaws.

Tronzadoras MG TL and TLG series single-head circular miter saws

Tronzadoras MG TL-400, TL-500, and TLG-352 circular saws with blade diameters up to 500 mm deliver clean mitre cuts across aluminium and PVC profiles. Machines incorporate hydro-pneumatic blade feed cylinders, an indexing turntable, and dual low-high pressure profile clamps.

Turntable miter indexing range spanning from -22.5 degrees to +157.5 degrees
Pneumatic vertical and horizontal clamps equipped with low-high pressure tuning
Hydro-pneumatic feed speed control and full-coverage protective safety hood
Integrated vacuum port and precision micro-drop LUBETOOLS blade lubrication

Tronzadoras MG DUO series automated double-head circular miter saws

Tronzadoras MG DUO-450 and DUO-550 XE twin-head miter saws execute simultaneous angle cuts across aluminium and polymer framing profiles. Servo-driven motorized head positioning delivers high dimensional accuracy and repeatable tolerances across high-volume production schedules.

Circular saw blades sized 450 and 550 mm driven by hydro-pneumatic feed axes
Pneumatic head pivoting to 22.5, 45, and 90 degrees with digital angle readout
Industrial CNC controller managing automated cut lists and barcode labeling
Intermediate pneumatic profile support preventing deflection on long extrusions

Tronzadoras MG GAA 90 automated high-production cutting systems

Tronzadoras MG GAA-350, GAA-600, and GAA-800 automated CNC cutting systems deliver high-throughput 90-degree square cutting for metal bars and extrusions. Systems combine ball-screw bar feeders, multi-point clamps, and optional drilling spindles into one unified cell.

Automated servo pusher feeding extrusions in step increments up to 600 mm
Integration of vertical drilling and tapping spindles within the cut sequence
Circular saw blades from 350 to 800 mm with electronic spindle speed tuning
Chip extraction hopper connected directly to dedicated industrial vacuum units

Tronzadoras MG K and BMSO series metalworking bandsaws

Tronzadoras MG K-260, K-280-M, and BMSO industrial bandsaws deliver dependable sawing for solid bars, structural steel tubing, and metal sections. Heavy rigid structural iron saw bows absorb operational harmonics, maintaining square cutting faces and narrow kerf allowances.

Miter swivel bow frame allowing angle adjustments from 0 up to 60 degrees right
Blade guides engineered with roller bearings and sintered hard-metal guide pads
Integrated hydraulic tension gauge monitoring continuous bandsaw blade stretch
Dual-speed drive motor providing blade cutting speeds of 40 and 80 meters/min

Tronzadoras MG RAFRE end milling and copy routing machinery

Tronzadoras MG RAFRE-CRA and RAFRE-CRSA end-milling machines mill transom profiles and end-notch aluminium door extrusions. Quick-change tool spindles and adjustable mechanical depth turrets deliver clean burr-free joint profiles matching structural assembly requirements.

Pneumatic milling stroke actuation featuring adjustable feed speed damping
Quick-change cutter spindle arbor accommodating multiple milling tool stacks
Six-position rotating turret stop enabling repeatable depth preset switching
Horizontal and vertical pneumatic profile clamps with rubberized work surfaces

Tronzadoras MG machine components, saw blades, and pneumatics

Tronzadoras MG mechanical elements and maintenance wear parts sustain cutting productivity across metal workshops: tungsten carbide tipped saw blades, drive belts, clamping cylinders, feed dashpots, linear optical scales, and air prep units matching machinery serial numbers.

Tungsten carbide tipped saw blades in diameters of 350, 400, 450, 500, and 600 mm
Profile clamping pneumatic cylinders and proportional pressure regulators
Hydraulic feed dashpot dampers providing regulated smooth saw bow motion
Component verification using factory serial numbers and parts schematics

Hydro-pneumatic ascending and miter circular sawing technology

Tronzadoras MG TL and TLG circular saw models execute ascending and miter cutting profiles with high edge squareness and minimal edge burr across aluminium alloys. Blade movement is actuated by an under-table hydro-pneumatic feed ram regulated through closed-loop flow control valves.

Smooth engagement dampens blade tooth shock when entering thin extrusion walls, extending carbide tip wear life. The high-precision turntable rotates freely between -22.5 and +157.5 degrees with digital angular encoder readout for rapid setup.

Pneumatic clamps grip the profile securely on both sides of the kerf, preventing workpiece vibration.

Double-head simultaneous cutting and servo positioning control

High-output Tronzadoras MG DUO-450 and DUO-550 XE twin-head cutting machinery cuts both extrusion ends concurrently at required angles for window and architectural frame fabrication.

The stationary left saw head and mobile right head pivot automatically to standard 22.5, 45, and 90 degree presets via pneumatic actuators. Right-head horizontal positioning is driven by a precision servo motor riding along induction-hardened linear guideways with positional feedback down to 0.1 mm.

An industrial touchscreen controller calculates cutting lengths, blade kerf allowances, and profile heights automatically.

Automated progressive stroke feed and multi-axis drilling on GAA cells

GAA 90 automated cutting cells integrate material feeding, 90-degree square sawing, and optional hole drilling within one continuous automated work envelope.

Profile advancement is managed by a servo-driven ball-screw gripper carriage delivering stroke positioning repeatability within 0.05 mm across feed increments up to 600 mm.

Integrated vertical drilling and tapping spindles execute fastening holes prior to the saw cut, eliminating secondary handling steps across separate machinery. Bottom chip hoppers connected to high-volume industrial extractors clear swarf continuously from locating datums.

Heavy-duty steel bandsaw cutting and hydraulic blade tensioning

Tronzadoras MG K series industrial bandsaws are engineered for dependable cut-off operations on solid steel rounds, structural tubing, and metal profiles. Structural iron bow architecture pairs with a two-speed helical reduction gearbox and sintered carbide guide blocks to minimize harmonic chatter.

An integrated hydraulic tension gauge maintains optimum bandsaw band tightness, preventing blade deviation across thick billets and avoiding premature fatigue fractures under heavy feeds. Mitering up to 60 degrees right enables angled cutting without rotating long bundles.

End milling and profile notch machining for structural transom joints

Tronzadoras MG RAFRE series transom end-milling machines mill joining notches on aluminium mullions and transoms for tight weather-sealed facade connections.

A quick-release cutter arbor allows installing tool stacks up to 160 mm in diameter and completing tool changeovers in under two minutes when retooling between window systems. A revolving six-position mechanical depth turret establishes repeatable milling depths across multi-step profile flanges.

Hydro-pneumatic stroke damping prevents cutter chatter, protecting decorative anodized or powder-coated finishes.

Preventive maintenance of pneumatic valves, cylinders, and drive components

Continuous multi-shift cutting availability across Tronzadoras MG machines is supported through structured preventive servicing and factory-specified component replacements.

Maintenance schedules outline pneumatic clamp cylinder seal evaluations, compressed air filter-regulator element exchanges, timing belt tension checks, and linear encoder calibration. Scheduled inspection of micro-drop LUBETOOLS dispenser nozzles prevents aluminium chip welding onto saw teeth.

Maintaining critical spare parts on-site protects fabrication operations against unplanned downtime.

Tronzadoras MG and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Tronzadoras MG and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.