Jinan Xintian Technology industrial laser machinery

Jinan Xintian Technology (XT Laser) industrial systems: sheet fiber cutters up to 60 kW, precision tube lasers, welding and cleaning units.

Jinan Xintian sheet metal fiber laser cutting machinery

Jinan Xintian Technology fiber laser cutting systems across G, GPX, and A series are built for rapid processing of carbon steel, stainless steel, aluminum, and copper. Heavy machine structures subjected to 650 C thermal stress relief eliminate vibration during high-speed cutting.

Gantry machinery systems across G, GPX, and A series with fiber sources up to 60 kW
Worktable operational envelopes from 1500x3000 mm expanding up to 2500x6000 mm
Automated dual shuttle exchange pallets enabling continuous material handling cycles
Dynamic kinematic acceleration up to 1.5G with precision positioning within ±0.03 mm

Jinan Xintian precision CNC tube laser cutting machinery

Jinan Xintian Technology CNC tube laser cutters across T, TK, and THP series handle 3D cutting of round, square, rectangular tubes, and structural channels. Pneumatic chucks with automated self-centering and side-mounted mechanics ensure clean cuts without thin-wall distortion.

Processing round tubes from 10 to 240 mm and rectangular profiles up to 240 mm width
Precision THP series models engineered for minimal remaining tail material waste
High-speed pneumatic self-centering clamping chucks rotating up to 200 rev per min
Automatic tube bundle storage loaders accommodating raw tube lengths up to 12.5 meters

Jinan Xintian combination sheet and tube laser systems

Versatile Jinan Xintian Technology laser machines across GT and HT series combine flat sheet processing and long tube cutting on a unified machine base. This configuration saves up to 50% of shop floor footprint while enabling swift changeover between plate and profile cutting.

Fully enclosed protective GT systems alongside open configuration HT series models
Independent rotary drive mechanism supporting tube workpieces up to 6 meters length
Unified numerical controller providing automated beam trajectory contour optimization
Advanced optical cutting heads equipped with closed-loop autofocus height tracking

Jinan Xintian handheld and robotic laser welding systems

Jinan Xintian Technology laser welding machines include water-cooled and air-cooled handheld units alongside multi-axis robotic welding cells. Joints are formed without thermal distortion, porosity, or excessive spatter, reducing post-weld grinding and surface preparation labor.

Multifunctional wobble welding heads providing adjustable oscillation beam widths
Reliable joining of dissimilar metals, titanium alloys, aluminum, and galvanized sheet
Six-axis articulated robotic arms engineered for high-volume automated welding tasks
Integrated precision wire feeder systems accommodating wire diameters from 0.8 to 1.6 mm

Jinan Xintian industrial surface laser cleaning equipment

Jinan Xintian Technology laser cleaning systems remove rust, oxides, heat scale, paint coats, and oil films without abrading the substrate. This non-contact optical process eliminates hazardous chemical reagents, abrasive media consumption, and subsequent industrial waste disposal.

Pulsed laser cleaners engineered for delicate mold tooling and precision components
High-power continuous wave CW configurations delivering optical output up to 3000 W
Lightweight ergonomic handheld cleaning guns projecting beam widths up to 300 mm
Ecological surface preparation workflow free from dust, solvents, and media grit

Jinan Xintian industrial laser marking and engraving units

Jinan Xintian Technology marking systems utilizing fiber, UV, and CO2 lasers generate indelible text, 2D data matrix codes, barcodes, and technical graphics on metals, plastics, glass, and ceramics. Fiber laser sources deliver an operating lifecycle exceeding 100,000 working hours.

Stationary benchtop, portable, and on-the-fly continuous production line systems
High-speed precision galvanometer scanners achieving marking speeds up to 7000 mm per s
Cold UV laser marking heads for micro-processing of polymers, silicon, and optics
Industrial software package compatible with enterprise tracking and automation loops

Manufacturing foundation and technological capabilities of Jinan Xintian

Jinan Xintian Technology Co., Ltd. (brand XT Laser) was established in 2004 in Jinan and represents a prominent developer of industrial laser processing machinery.

The manufacturing complex integrates three specialized production hubs located in Suncun, Shengjing, and Zhangqiu spanning over 50,000 square meters of workshop area.

The manufacturing infrastructure incorporates large gantry milling equipment, high-temperature thermal stress annealing chambers operating at 650 C, and laser interferometers for kinematic calibration.

Corporate quality management complies with ISO 9001 provisions, providing dependable machine tool geometry and prolonged component service life.

Fiber laser cutting machinery systems for sheet metal and plates

Sheet metal cutting machinery across G, GPX, and A series incorporates high-efficiency ytterbium fiber laser sources delivering power ratings from 1.5 kW up to 60 kW.

The reinforced aerospace-grade extruded aluminum gantry minimizes dynamic inertia under 1.5G kinematic accelerations, yielding dross-free edge quality on plates up to 100 mm.

To reduce handling downtime, machines feature automatic hydraulic shuttle worktables capable of complete pallet exchange cycles in under 15 seconds.

Independent autofocus optical cutting heads equipped with closed-circuit liquid cooling protect optical lenses during prolonged multi-shift production runs across fabrication workshops.

Precision CNC tube cutting machinery and structural profile processing

Automated tube cutters across T, TK, and THP series perform 3D cutting of structural shapes, round tubes, and rectangular hollow sections with strict accuracy.

Intelligent self-centering pneumatic chucks automatically adjust clamping pressure based on wall thickness, eliminating mechanical crimping on thin-walled aluminum and copper pipes.

The high-precision THP series utilizes a side-mounted clamp architecture achieving negligible remnant tail waste, saving material on expensive alloy tubing.

Automated package loaders accept tube bundles up to 12.5 meters in length, executing sequential dispensing, seam orientation, and feed stroke advancement without manual intervention.

Combination dual-function laser systems for flat plates and tubes

Dual-purpose cutting systems across GT and HT series merge flat sheet processing and full-length tube profile cutting within a single structural frame.

This integrated layout conserves workshop floor area and curtails capital expenditures, allowing fabricators to toggle production between plate parts and structural tubular components.

The systems feature unified CNC control software equipped with an integrated laser cutting parameter library for various metals.

Automated tube deflection compensation algorithms combined with optical workpiece coordinate tracking ensure accurate hole alignments and bevel mating for architectural frames and structural assemblies.

Precision laser welding machines, surface cleaners, and marking units

Jinan Xintian Technology finishing equipment incorporates compact handheld laser welders, pulsed cleaning machinery, and stationary marking stations.

Handheld welders featuring wobble optical heads create dense, hermetic weld beads with smooth surfaces, preventing thermal warpage across thin-gauge stainless steel enclosures.

Optical cleaning systems strip rust layers, thermal oxide scale, grease, and paint coatings without altering base metal microstructures.

Industrial fiber and ultraviolet marking units generate permanent high-contrast DataMatrix identifiers, serial codes, and technical graphics across metals, optical glass, and high-performance polymers.

Engineering equipment configuration by technical customer specifications

Application engineers evaluate plant production objectives to configure Jinan Xintian Technology laser systems based on workpiece geometry, throughput targets, and specific metal alloys.

Complete engineering support covers replacement laser optics, protective windows, cutting nozzles, servo drives, and linear motion bearings.

Industrial equipment and component deliveries proceed through documented commercial terms backed by technical customs compliance and comprehensive accounting documentation.

Direct engineering coordination with the manufacturing plant provides verified operational parameters and dependable component fitment.

Jinan Xintian Technology and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Jinan Xintian Technology and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.