GVR Pompe industrial external volumetric gear pumps

GVR Pompe industrial external gear pumps (Italy): monobloc BMF/BCF, bell-coupling BFC, heated BC, and high-pressure APF units.

Monobloc gear pumps across BMF and BCF series

GVR Pompe monobloc gear pumps across BMF and BCF series with integrated IM B34 electric motors transfer lubricating fluids from 1 to 1,000 cSt without solid particles at flowrates from 2 to 70 L/min and continuous operational delivery pressures up to 12 bar.

Compact monobloc construction with rigid flange alignment for electric motor drive
Durable body options built in solid grey alloy or stainless steel grade AISI 316
Industrial three-phase and single-phase electric motors with IP55 protection rating
Accurate engineering selection of pump displacement based on fluid viscosity data

Bell-coupling gear pumps across BFC series

GVR Pompe BFC series volumetric gear pumps couple to standard IEC industrial electric motors with B14 flanges using intermediate bell housings and flexible couplings, delivering 2 to 70 L/min of lubricating fluids at system operating pressures up to 12 bar.

Standardized intermediate bell housing for direct coupling to IEC electric motors
Flexible internal coupling dampens vibration and protects drive shaft bearings
Hydraulic body configurations available in grey alloy, bronze, or steel AISI 316
Rapid motor replacement without disassembling fluid suction and delivery piping

Bare shaft gear pumps with feet mounting across B series

GVR Pompe B series volumetric gear pumps with bare drive shafts and feet mounting handle medium and high viscosity lubricants from 1 to 20,000 cSt. The product line covers broad operational delivery from 5 to 800 L/min at working pressures reaching 12 bar.

Broad volumetric fluid delivery capacity spanning from 5 to 800 liters per minute
Dependable handling of high-viscosity lubricating fluids measuring up to 20,000 cSt
Rigid base feet mounting ensures firm vibration-free installation on skid frames
Explosion-proof design variants available upon request under ATEX directives

Gear pumps with heating chamber across BC series

GVR Pompe BC series volumetric gear pumps feature integrated thermal jackets within the pump housing for circulation of diathermic heat transfer oil, hot water, or steam. Ranging from 10 to 400 L/min, they prevent hardening of bitumens, resins, and waxes up to 12 bar.

Integrated thermal jacket body prevents solidification of heavy fluid media
Connects to external thermal circulation loops using hot water, steam, or oil
Hydraulic assembly fabricated in durable grey alloy or stainless steel AISI 316
Stable fluid transfer for temperature-sensitive resins and polymers up to 12 bar

High-pressure gear pumps across APF series

GVR Pompe APF series positive displacement gear pumps deliver fluid pressures up to 25 bar with capacities between 5 and 80 L/min. This series powers heavy-duty forced lubrication loops, auxiliary hydraulic machinery, and fuel oil feeding for industrial burners.

Elevated continuous operating delivery pressure capability reaching up to 25 bar
Precision tooth profile geometry minimizes operating noise and pressure ripples
Direct flange coupling to standard IEC IM B34 electric motors via drive coupling
Heavy-duty housing construction built with alloy body and high-tensile steel shafts

Skid-mounted pump groups MBM and IF chemical pumps

GVR Pompe product lines incorporate skid-mounted MBM and MBMC pumping packages on steel baseplates with B3 electric motors, alongside stainless steel AISI 316 series IF units rated at 5 to 25 L/min up to 25 bar for low-viscosity chemicals and industrial reagents.

Pre-assembled MBM pump skid packages mounted on rigid baseplates with coupling
Corrosion-resistant IF series fabricated in AISI 316 stainless steel metallurgy
Precision metering and transfer for low-viscosity fluids starting from 5 L/min
Factory-aligned shaft couplings deliver extended service life and reliability

Engineering standards and technological foundation of GVR Pompe

Italian manufacturer GVR Pompe has specialized in the development and precision production of external volumetric gear pumps since 1956.

The modern manufacturing complex in Pieve Emanuele near Milan accommodates specialized engineering design departments, computerized milling workshops, and automated hydrodynamic testing loops. The enterprise has operated under family stewardship across three generations.

Rigid tooth profile tolerances and minimal clearances between gear teeth and pump housings eliminate cavitation and suppress hydraulic pulsations.

The manufacturing system is accredited under international quality standard ISO9001, providing long-term operational endurance for industrial machinery in continuous heavy-duty processing installations.

Monobloc and bell-coupling pumps BMF, BCF, and BFC for industrial processing

The BMF and BCF product lines feature compact monobloc construction with integrated electric motors conforming to IM B34 specifications, delivering fluid outputs from 2 to 70 liters per minute at pressures up to 12 bar.

The BFC series incorporates an intermediate bell housing and flexible internal coupling, enabling direct matching to any standardized IEC industrial electric motor.

Hydraulic pump bodies are manufactured in solid grey alloy, bronze, or corrosion-resistant stainless steel grade AISI 316.

These units power continuous lubrication for rolling mill journal bearings, cooling fluid circulation, industrial gear unit charging, and transfer of clean mechanical lubricants with kinematic viscosity ratings reaching 1,000 cSt.

Bare shaft pumps across B series and skid-mounted packages MBM

Positive displacement gear pumps across series B with bare drive shafts and rigid foot mounting handle viscous fluids up to 20,000 cSt at flowrates spanning 5 to 800 L/min.

Modular MBM pumping packages are built upon robust structural steel baseplates, integrating the B series pump with a B3 electric motor through a vibration-damping flexible shaft coupling.

The pumps feature single or double mechanical seals, high-temperature gland packings, and internal pressure relief bypass valves.

For chemical facilities, paint workshops, and volatile processing environments, ATEX explosion-proof configurations are available in full accordance with European safety standards.

Heated gear pumps across BC and MBMC series for temperature-sensitive fluids

Series BC gear pumps and skid-mounted MBMC packages incorporate an integral thermal heating jacket around the hydraulic fluid cavity.

The jacket accommodates continuous circulation of diathermic heat transfer oil, saturated steam, or hot industrial water, completely preventing solidification of viscous media within the pumping mechanism.

Covering displacements from 10 to 400 L/min, these specialized pumps serve bitumen distribution terminals, asphalt production sites, paraffin plants, synthetic resin synthesis, and industrial adhesive processing.

The balanced thermal profile preserves fluid fluidity up to 12 bar, preventing startup jamming when processing heavy polymers.

High-pressure pumps APF and stainless steel chemical pumps series IF

Series APF positive displacement gear pumps generate elevated working delivery pressures up to 25 bar with capacities between 5 and 80 L/min.

The series is utilized in forced lubrication loops for high-torque industrial gearboxes, machine tool hydraulic systems, and heavy fuel oil delivery systems for large thermal industrial boilers.

The specialized IF product line is constructed from stainless steel AISI 316 to handle chemically active and low-viscosity solutions at 5 to 25 L/min under pressures up to 25 bar.

Strict gear tooth profile finishing guarantees steady laminar delivery without cavitation wear across internal hydraulic pathways.

Maintenance guidelines, spare parts selection, and factory components

To preserve dependable performance of GVR Pompe machinery, the factory produces targeted replacement parts: drive gears, idle gears, precision ground shafts, sleeve bushings, mechanical seals, and body gaskets.

Technical engineering specialists execute precise component matching using the equipment serial number and nameplate.

Scheduled preventive maintenance involves periodic inspection of flexible coupling inserts, verification of axial gear clearances, and examination of shaft sealing integrity.

Timely substitution of wear components with qualified factory-built parts prevents unexpected downtime across critical processing installations.

GVR Pompe and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of GVR Pompe and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.