Hydra-Cell / Wanner Engineering Seal-less High Pressure Diaphragm Pumps
Technical specifications and engineering selection of American-made Hydra-Cell Pro seal-less positive displacement pumps, API 674 triplex pumps, and API 675 metering solutions by Wanner Engineering, Inc.
Hydra-Cell Pro Sealless Pumps Series G and D
Hydra-Cell Pro sealless diaphragm pumps series G and D provide flow rates up to 140 l/min and pressures up to 103 bar. The multiple diaphragm balanced design eliminates dynamic seals and guarantees reliable dry running. Models G-03, G-10, G-25, and G-35 handle abrasives and machine coolant.
- Flow rate up to 140 l/min
- Pressure up to 103 bar
- Indefinite dry running
- Models G-03, G-10, G-25, G-35
API 674 High-Pressure Pumps Series T and Q
Industrial triplex pumps series T-80, T-100, T-200 and quintuplex pump Q-155 meet API 674 standards. They achieve pressures up to 345 bar with capacities up to 594 l/min. Direct hydraulic diaphragm actuation reliably handles viscous slurries up to 20,000 cSt and high-temperature process fluids.
- API 674 compliant
- Pressure up to 345 bar
- Flow up to 594 l/min
- Viscosity to 20,000 cSt
API 675 Hydra-Cell Precision Metering Solutions
Precision metering pumps series P100, P200, P300, P400, P500, P600, and MT8 are built to API 675 criteria. Steady-state accuracy stays within 1 percent with 1 percent linearity and 3 percent repeatability. The sealless liquid end completely eliminates fumes and hazardous chemical leakage.
- API 675 compliant
- Steady accuracy within 1%
- Linearity within 1%
- P100 to P600 & MT8
Wanner Valve Kits & Liquid End Parts
Factory Valve Kits from Wanner Engineering feature precision-ground seats, valves, springs, and seal rings. Components are crafted in 17-4 PH stainless, 316L, Hastelloy C, ceramic, and tungsten carbide. Replacing the valve pack restores hydraulic tightness and volumetric efficiency.
- Seats, valves & springs
- 17-4 PH, 316L & Hastelloy
- Ceramic & tungsten carbide
- Restores pump efficiency
Diaphragm Kits & Elastomer Seals
Diaphragm Kits feature hydraulically balanced diaphragms and O-rings engineered for heavy duty. Elastomer options include PTFE, EPDM, FKM (Viton), Buna-N, and Aflas to match aggressive chemicals. The flexible diaphragms withstand millions of stress-free pressure cycles without fatigue.
- Diaphragms & seal O-rings
- Elastomers PTFE, EPDM & FKM
- Buna-N, Neoprene & Aflas
- Millions of flex cycles
Drive Shafts, Plungers & Bearing Components
For the mechanical end of Hydra-Cell pumps, Wanner supplies precision drive shafts, plunger followers, and bearings. Shaft seal kits safeguard the oil sump against contamination. Using authentic drive parts prevents bearing play and housing bore wear under continuous industrial duty.
- H25 eccentric drive shafts
- K25 plunger follower sets
- Tapered roller bearings
- Crankcase shaft seal kits
Pressure Regulating & Bypass Valves C-Series
Pressure regulating and bypass valves of the C-series (C20, C46, C62, C64) handle pressures from 3.5 to 345 bar. Continuous bypass offloading protects pump systems from hydraulic hammer when lines shut. Bodies are machined from brass, 316 stainless steel, and corrosion-proof Hastelloy.
- Pressure 3.5 to 345 bar
- Surge-free bypass relief
- Series C20, C46, C62, C64
- Brass, 316 SS & Hastelloy
Turnkey Baseplate Pump Skid Packages
Turnkey Hydra-Cell pump skid packages mount on rigid steel baseplates with electric motors, gearboxes, and couplings. Assemblies feature pressure transmitters, inlet strainers, and control panels. Systems are delivered in industrial and explosion-proof ATEX builds for demanding process plants.
- Rigid steel baseplate skid
- Electric motor and gearbox
- Instrumentation and valves
- ATEX hazardous zone rating
Hydraulically Balanced Diaphragm Principles of Hydra-Cell Pumps
American manufacturer Wanner Engineering, Inc. has engineered and built Hydra-Cell seal-less positive displacement pumps since 1972.
The central advantage lies in hydraulic diaphragm balancing: process fluid resides on one side of the diaphragm while hydraulic drive oil supports the other. Equal pressure across the elastomer throughout forward and backward strokes eliminates stress and flexing fatigue.
High Pressure Triplex and Quintuplex Pumping under API 674 Standards
The heavy-duty Hydra-Cell Pro line encompasses triplex pumps T-80, T-100, T-200 and quintuplex pump Q-155, designed in compliance with American Petroleum Institute API 674 specifications.
The units deliver discharge pressures up to 345 bar (5000 psi) and flow rates to 594 l/min, providing 24/7 reliability for oilfield water disposal, chemical injection skids, and reverse osmosis seawater desalination.
Precision Chemical Dosing and Metering Solutions to API 675 Criteria
Hydra-Cell Metering Solutions comprising P100, P200, P300, P400, P500, P600, and MT8 series are tailored for precise dosing of volatile chemicals.
Hardware achieves steady-state accuracy within 1 percent, linearity within 1 percent, and repeatability within 3 percent, exceeding API 675 requirements with either manual stroke adjusters or electronic 4-20 mA actuators.
Seal-less Abrasive Handling and Dry Running Protection Capabilities
Conventional packed-plunger pumps degrade rapidly when handling particulate-laden fluids because abrasive particles score plungers and burn packing. Hydra-Cell pumps isolate fluid from dynamic shaft seals.
The pumps move slurries with particulates up to 800 microns, ceramic glaze, lime, and drilling fluids without wear. Furthermore, units run dry indefinitely without damaging internal hydraulic mechanisms.
Wetted Material Selection for Aggressive Chemicals and Acids
Modular pump heads adapt to diverse chemical media. Wetted manifolds are machined from 316L stainless steel, Hastelloy CW12MW, cast iron, PVDF, and polypropylene.
Valve assemblies feature valve seats and balls in ceramic, tungsten carbide, and hardened 17-4 PH stainless steel, paired with diaphragms in PTFE, FKM (Viton), EPDM, and Aflas.
Turnkey Skid-Mounted Pump Systems with Electric Drive and Controls
For industrial plants, factory-assembled turnkey skids mount on rigid steel baseplates with electric motors, industrial couplings, and gear reducers.
Packages integrate pulsation dampeners, C-series bypass regulating valves, inlet strainers, and control enclosures with variable frequency drives for automated flow modulation.
Hydra-Cell / Wanner Engineering and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hydra-Cell / Wanner Engineering and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Brand Hydraulics
- Equipment and parts for Kingston Valves
- Equipment and parts for ACTREG
- Equipment and parts for WASCO
Documents and sources
- Wanner Engineering Hydra-Cell Official Website
- Hydraulically Balanced Diaphragm Principles
- Hydra-Cell Pro Industrial Seal-less Pumps
- High Pressure Triplex and Quintuplex API 674 Pumps
- API 675 Hydra-Cell Metering Solutions
- Valve Kits and Diaphragm Kits Replacement
- Seal-less Pump Features and Benefits
- Hydra-Cell Technical Manuals and Guides
- Wanner Pumps China Subsidiary Official Portal
