Eaton Industrial Electrical Equipment & Spares: NZM/FAZ Breakers, DILM Contactors, 9SX UPS, PowerXL Drives & Vickers Hydraulics

Direct international supply of genuine industrial electrical equipment from Eaton Corporation plc (founded in 1911): NZM/IZMX compact circuit breakers (MCCB), FAZ modular breakers, DILM contactors, PKZM0 motor protectors, 9SX/9PX online UPS, PowerXL drives, and Vickers hydraulic components.

Eaton NZM Series Moulded Case Circuit Breakers & IZMX Air Circuit Breakers

Eaton NZM series moulded case circuit breakers (frame sizes NZM1, NZM2, NZM3, NZM4) rated from 20 to 1600 A and IZMX16 / IZMX40 open air circuit breakers rated from 630 to 4000 A are engineered for heavy-duty main power distribution, transformer feeder protection, and motor control centers.

Featuring extreme breaking capacities up to 150 kA at 415 V, these circuit breakers leverage advanced PXR electronic trip units with embedded power metering and diagnostic intelligence.

PXR electronic trip units featuring class-1 power measurement, ground fault protection, and graphic OLED display
Ultimate short-circuit breaking capacity up to 150 kA at 415 V AC across unified space-saving frame envelopes
Fixed and withdrawable (draw-out) execution with safety interlocks for maintenance isolation without busbar disruption
Seamless digital communications integration via native Modbus RTU, Profibus-DP, and Ethernet TCP/IP architectures

Eaton FAZ Miniature Circuit Breakers & xEffect Residual Current Devices

Eaton FAZ, FAZ-T, and FAZ6 miniature circuit breakers (MCBs) rated from 0.5 to 63 A provide dependable circuit protection for industrial control panels, automation infrastructure, and commercial electrical distribution.

Complemented by FRCmM residual current circuit breakers (RCCBs) and PKNM / mRB6 residual current breakers with overcurrent protection (RCBOs), the lineup provides tripping sensitivities from 10 to 300 mA.

Rated short-circuit breaking capacity up to 15 kA in compliance with IEC/EN 60898-1 and IEC/EN 60947-2
Specialized tripping curves K, S, and Z engineered for delicate control transformers, semiconductors, and PLCs
Dual-terminal design allowing simultaneous termination of pin-type busbars and incoming conductors
Modular snap-on accessories including auxiliary contacts, shunt trip releases, and undervoltage trip modules

Eaton DILM Power Contactors & PKZM0 / PKZM4 Motor-Protective Circuit Breakers

Eaton DILM contactor series (from DILM7 up to DILM1600) delivers reliable motor switching for ratings up to 900 kW in AC-3 duty.

Paired with PKZM0 (up to 32 A) and PKZM4 (up to 65 A) motor-protective circuit breakers with short-circuit breaking capacities up to 150 kA without upstream backup fuses, they configure coordinated motor starters with optimal footprint and operational lifespan.

Wide-voltage electronic AC/DC control coils with low pick-up/holding power and integrated transient suppressors
PKZM0 and PKZM4 motor protectors providing short-circuit breaking up to 150 kA and adjustable overload trips
Bimetallic and electronic overload relays ZB12, ZB32, ZB65, and ZEB featuring phase-failure sensitivity
Direct SmartWire-DT communication connectivity eliminating conventional I/O point-to-point wiring

Eaton T-Series Rotary Cam Switches & P1 / P3 Switch-Disconnectors

Eaton T-series cam switches (T0, T3, T5B) and P-series switch-disconnectors (P1, P3, P5) rated from 20 to 315 A deliver rugged manual switching, control sequence selection, and emergency-stop isolation for industrial machinery.

Available in open flush-mount, DIN-rail configurations, and robust surface-mount insulated enclosures up to IP65 with padlockable rotary operating mechanisms.

High electrical and mechanical endurance up to 500,000 operating cycles under heavy inductive loading
IP65 sealed thermoplastic enclosures engineered for harsh industrial washdown and dusty environments
Emergency-Off red/yellow rotary handles lockable with up to three padlocks in the open (0/OFF) position
Extensive custom and standard switching programs including changeover, star-delta, and multi-step selection

Eaton 9SX, 9PX & 93PM Online Double Conversion UPS Systems

Eaton online double-conversion uninterruptible power supplies including 9SX (1–11 kVA), 9PX (1–22 kVA), and 93PM / 9395 modular 3-phase systems (up to 1200 kVA) guarantee clean, uninterrupted sinusoidal power for industrial control racks, critical PLCs, and manufacturing automated lines.

Offering unity power factor and hot-swappable battery modules, these units safeguard processes against voltage sags, harmonics, and blackouts.

True online double-conversion architecture with zero transfer time to internal and external battery backup
Unity output power factor (PF = 1.0, kVA = kW) maximizing deliverable active power to modern industrial loads
Energy Saver System (ESS) operational mode boosting overall operating efficiency up to 99%
Cybersecure Gigabit Network Cards (NETWORK-M2 and NETWORK-M3) certified to UL 2900-1 standard

Eaton PowerXL DG1 / DM1 Variable Frequency Drives & DS7 / S811+ Soft Starters

Eaton PowerXL variable speed drives, including DC1, DA1, DG1, and next-generation DM1 Pro micro drives spanning 0.37 to 630 kW, offer superior dynamic control and energy optimization for centrifugal pumps, air handling units, and industrial conveyors.

Complemented by DS7 and S811+ solid-state soft starters with integral bypass, they mitigate mechanical shock and electrical inrush on startup.

Sensorless vector control (SLV) delivering up to 200% starting torque across low-speed heavy-inertia duty
Integrated dual DC link chokes and class C2/C1 EMC filters suppressing harmonic line distortions
Compact DM1 Pro architecture featuring onboard Modbus, Ethernet/IP, and SIL2 / Cat 3 Safe Torque Off (STO)
DS7 and S811+ soft starters preventing hydraulic water hammer and mechanical coupling premature wear

Eaton Bussmann Series High-Speed & Industrial Power Fuses

Eaton Bussmann series fuses set the benchmark in ultra-rapid circuit protection for sensitive power semiconductors including SCRs, thyristors, IGBT inverters, and DC drives.

The portfolio spans cylindrical cartridges (10x38, 14x51, 22x58 mm), standard DIN / NH knife-blade links (NH000 through NH4a), and square-body high-speed fuses rated up to 7500 A and operational voltages up to 1500 V DC / 1000 V AC.

Ultra-rapid response curves (gR, aR, aS) delivering extremely low let-through I²t energy to protect silicon
Interrupting rating up to 200 kA RMS ensuring total isolation under catastrophic fault conditions
Versatile terminations: flush-end studs, knife blades, and visual trip indicators compatible with microswitches
Engineered solutions for photovoltaic arrays (1000/1500 V DC PV class), battery storage, and EV traction systems

Eaton Vickers Industrial Hydraulics: Directional Valves, Pumps & Seal Kits

Hydraulic power and fluid conveyance components engineered under the Eaton, Vickers, and Char-Lynn brands power heavy metallurgy plants, CNC machine tools, injection moulding machines, and mining equipment worldwide.

We supply original DG4V solenoid-operated directional control valves, PVH/PVB variable displacement axial piston pumps, Vickers V/VQ vane pumps, Char-Lynn orbital hydraulic motors, and OEM replacement rotating groups and cartridge kits.

Directional spool valves DG4V-3 and DG4V-5 compliant with standard ISO 4401 (CETOP 03 and CETOP 05) interfaces
PVH heavy-duty axial piston pumps rated for continuous operation at 350 bar with load-sensing compensators
Char-Lynn high-torque low-speed (HTLS) orbital motors (2000, 4000, 6000 series) for rugged rotary machinery
Original factory replacement cartridges, seal kits, cylinder blocks, valve plates, and piston assemblies

Eaton Industrial Electrical Equipment Identification & Part Number Sourcing

Eaton Corporation plc (founded in 1911 by Joseph Eaton, with global headquarters in Dublin, Ireland and North American operations centered in Beachwood, Ohio) stands as a premier global power management enterprise.

The company engineers and manufactures an extensive portfolio of medium and low-voltage power distribution equipment, circuit breakers (NZM, IZMX, FAZ), motor control devices (DILM, PKZM), online UPS systems (9SX, 9PX, 93PM), variable frequency drives (PowerXL), high-speed fuses (Bussmann), and

hydraulic components (Vickers).

To verify compatibility and procure genuine components, provide the complete manufacturer catalog number (e.g. 207325 for P1-32/I2/SVB or 259079 for NZMN2-A250), equipment series, rated current, control voltage, or an image of the device nameplate.

Moulded Case Circuit Breakers NZM & Open Air Circuit Breakers IZMX

Eaton NZM series moulded case circuit breakers (frame sizes NZM1 through NZM4) span nominal current ratings from 20 to 1600 A with ultimate short-circuit breaking capacities from 25 to 150 kA at 415 V AC.

The breakers integrate thermal-magnetic trip units alongside advanced PXR microprocessor electronic trip units with precision metering.

For main low-voltage switchboards and power station distribution panels, Eaton IZMX16 (up to 1600 A) and IZMX40 (up to 4000 A) air circuit breakers deliver breaking capacities up to 105 kA. Compact frame envelopes minimize enclosure footprints across xEnergy switchgear systems.

We supply fixed-mount and draw-out withdrawable configurations complete with motor operators, shunt trip coils, undervoltage releases, and auxiliary signaling contacts.

FAZ Miniature Circuit Breakers & xEffect Residual Current Devices

Eaton FAZ, FAZ-T, and FAZ6 modular DIN-rail circuit breakers rated from 0.5 to 63 A provide high-reliability circuit protection across industrial machinery, automation cabinets, and branch circuits.

Available in 1-, 2-, 3-, and 4-pole versions across tripping curves B, C, D, K, S, and Z with breaking capacities up to 15 kA.

Personnel safety and fire prevention are ensured through FRCmM residual current circuit breakers (RCCBs) and PKNM / mRB6 residual current breakers with overcurrent protection (RCBOs) featuring sensitivity thresholds of 10, 30, 100, and 300 mA.

Dual-terminal technology enables simultaneous termination of busbar combs and stranded incoming copper cables up to 25 mm² without loose connections.

DILM Power Contactors & PKZM0 / PKZM4 Motor-Protective Circuit Breakers

For motor switching and protection across machine tools, pumping stations, and industrial conveyors, Eaton manufactures DILM contactors ranging from DILM7 (3 kW AC-3) up to DILM1600 (900 kW). Electronically controlled AC/DC coils ensure chatter-free operation even during voltage dips.

PKZM0 (up to 32 A) and PKZM4 (up to 65 A) motor-protective circuit breakers combine temperature-compensated bimetallic overload elements with instantaneous magnetic short-circuit releases rated up to 150 kA without requiring upstream backup fuses.

Switching devices seamlessly integrate into reversing starters and star-delta assemblies via modular prefabricated electrical link kits.

T-Series Rotary Cam Switches & P1 / P3 Main Switch-Disconnectors

Eaton T-series rotary cam switches (sizes T0, T3, T5B) rated at 20, 32, and 63 A deliver dependable manual switching for instrument voltmeter circuits, motor reversing, multi-step control, and tapping selection on industrial machinery.

P1 (up to 32 A), P3 (up to 63/100 A), and P5 (up to 160/315 A) switch-disconnectors provide positive, visible contact separation under load. Units are available in panel-mount, DIN-rail mount, and IP65 rugged polycarbonate surface enclosures.

The red/yellow emergency-stop rotary handle accommodates up to three padlocks in the OFF position, ensuring strict compliance with Lockout/Tagout (LOTO) workplace safety regulations.

Online Double Conversion Industrial UPS: 9SX, 9PX & 93PM Series

Eaton online double-conversion uninterruptible power supplies supply stable, conditioned sinusoidal power to mission-critical PLCs, DCS controllers, CNC machines, and robotic assembly cells.

Single-phase 9SX (1–11 kVA) and 9PX (1–22 kVA) units feature unity power factor (PF = 1.0, kVA = kW), automatic internal bypass, and optional external battery modules (EBM) for extended runtime resilience.

Three-phase modular 93PM UPS systems rated up to 500 kVA operate at up to 99% efficiency in Energy Saver System (ESS) mode and include NETWORK-M2/M3 Gigabit management cards.

PowerXL DG1 / DM1 Variable Speed Drives & DS7 / S811+ Soft Starters

Eaton PowerXL variable speed drives, including DC1, DA1, DG1, and compact DM1 Pro micro-drives spanning 0.37 to 630 kW, optimize energy consumption and mechanical life across industrial blowers, compressors, and pump skids.

The DG1 platform includes integrated class C2 EMC filters, brake choppers, and dual DC link chokes, mitigating power system harmonics without extra hardware. Supported protocols include Modbus RTU, Ethernet/IP, Profinet, and BACnet.

Solid-state DS7 and S811+ soft starters with integrated bypass eliminate mechanical stress on couplings and eliminate hydraulic water hammer in industrial pipeline networks.

Bussmann Series High-Speed Semiconductor & Industrial Power Fuses

Eaton Bussmann series fuses provide industry-leading ultra-rapid circuit protection for power semiconductor equipment: SCR thyristors, diode rectifiers, IGBT inverter modules, and solar photovoltaic systems.

The portfolio features compact cylindrical cartridges (10x38, 14x51, 22x58 mm), standard DIN / NH knife-blade links (NH000 through NH3), and square-body fuses rated up to 7500 A and 1500 V DC.

Ultra-low let-through I²t energy ensures instantaneous arc clearing during short-circuit faults up to 200 kA, safeguarding expensive silicon devices.

Eaton Vickers Industrial Hydraulics: DG4V Valves, PVH Pumps & Seal Kits

Hydraulic components from Eaton, Vickers, and Char-Lynn operate across thousands of injection molding presses, steel mills, CNC machine tools, and mobile heavy machinery worldwide.

We supply genuine solenoid-operated directional valves DG4V-3 and DG4V-5 (ISO 4401 / CETOP 3 and 5), variable displacement axial piston pumps PVH (up to 350 bar), Vickers V/VQ vane pumps, and Char-Lynn orbital hydraulic motors.

For scheduled maintenance and plant overhauls, we supply OEM cartridge kits, rotating groups, valve spools, and FKM/NBR genuine seal rebuild kits.

Quality Assurance & International Compliance

All Eaton manufacturing facilities operate under certified ISO 9001 quality management, ISO 14001 environmental management, and ISO 45001 occupational health and safety standards.

Electrical switchgear and protection components undergo comprehensive factory acceptance testing for dielectric withstand, short-circuit withstand, mechanical endurance, and thermal dissipation under IEC/EN 60947 and IEC/EN 60898.

Every delivered component is provided with manufacturer factory inspection test sheets, full technical documentation, and international certificates of conformity.

International Supply Chain & Engineering Delivery

Equipguo provides direct international export supply of genuine Eaton electrical equipment, circuit protection devices, automation components, and spare parts for manufacturing facilities globally.

We oversee the complete export process: part number verification, OEM cross-referencing, customs clearance, secure transit packaging, and expedited international multimodal shipping to customer destination facilities.

We offer technical consultation, structured commercial contracts, and flexible export delivery terms from individual replacement items to complete cabinet bills of materials.

Delivery lead times, batch quantities, and pricing for Eaton equipment are calculated upon individual project specification; public retail price lists are not published by the manufacturer.

We operate as an independent international supplier and are not an exclusive distributor of Eaton Corporation plc.