Tiger Chiyoda (Chiyoda Machinery) Concrete Forming Lines & Equipment
Japanese concrete block machines (S, TGD, TGM, PS, TG, CFV, CV), mixers (DM, RM, DMK, OM), 3D-CAD molds, PTS/RT handling, poured precast lines, and PV/ash recycling systems by Tiger Chiyoda Co., Ltd.
Mold-Vibration Block Machines (S, TGD, TGM, TGF-4)
Mold-vibration S-Series machines (S-3, S-4, S-6) use dual 15-22 kW servo vibrators to reach cycles as fast as 6 seconds for 60-215 mm high concrete products. Suspended TGD-4B/5B/6B isolate frame loads, while TGM-3/4/6 and TGF-4 expand output. We source vibrators, dampers, and blades.
- S-3 / S-4 / S-6: 6 s/cycle, dual 15-22 kW servo motors, 60-215 mm
- TGD-4B / 5B / 6B: 4 x 2.2-3.7 kW vibrators, suspended mold frame
- TGM-3 / 4 / 6 (horizontal bar) and TGF-4 4-side screen-block press
- Wear parts: vibration motors, servo drives, agitator paddles, mounts
Table-Vibration & Inversion Presses (PS, TG, CFV, ML, CV)
Table-vibration PS (PS-60V/80V/100V), TG (TG-6BSV/10BSV/24BSV), and CFV (50/60/100) presses run 30-37 kW drives with auto mold change for pavers and blocks. ML-100 (4 x 3.5 kW) and mold-inversion CV-10S/15H handle large civil units. We supply eccentric shafts, cylinders, and table parts.
- PS-60V / 80V / 100V: 30-37 kW drive, pallets up to 1400 x 1080 mm
- TG-6BSV / 10BSV / 24BSV & CFV-50 / 60 / 100: 30-37 kW table drives
- CV-10S / CV-15H inversion press: up to 1500 x 1250 x 500 mm, 2500 kg
- Spares: vibration shafts, bearing housings, hydraulic valves, locks
Batching Mixers (DM, RM, DMK High-Shear & OM Bladeless)
Tiger Chiyoda builds vertical DM-8..81 (150-1500 L) and horizontal RM-24..120 (500-2500 L) concrete mixers plus tilting high-shear DMK-10..4000 units (up to 4000 L / 6400 kg). Bladeless OM-5..1000NA mixers (0.5-75 kW) disperse fibers, GRC, and resins without heat. We supply blades and liners.
- DM-8..81: 150-1500 L (350-3150 kg); RM-24..120: 500-2500 L (to 5500 kg)
- DMK-10..4000: tilting drum, charge up to 4000 L / 6400 kg
- OM-5..1000NA / OMN-15 / OMH-30NA: 5-1000 L bladeless soft mixers
- Wear parts: mixing arms, scraper blades, drum liners, shaft seals
Custom 3D-CAD Molds & Hardened Wear Tooling
Tiger Chiyoda designs custom block and paver molds in 3D-CAD through plate fabrication, CNC machining centers, lathes, heat-treatment quenching, and dimensional inspection. Tooling also adapts to third-party block presses. We supply complete mold boxes, tamper shoes, cores, and guide bushings.
- Engineering: custom 3D-CAD profiles for masonry and paving units
- Manufacturing: CNC machining centers, lathes, and quench hardening
- Compatibility: Tiger Chiyoda lines and modified third-party presses
- Spares: mold inserts, tamper heads, core bars, wear plates, bushings
PTS / RT Curing Transport, Loaders, Cubers & Robotics
Handling automation covers multi-tier PTS pallet transport directly into curing racks, compact RT and battery-powered rack carriers, loaders/unloaders, cubers, and articulated robots. Modules retrofit existing kilns and third-party presses. We supply wheels, encoders, chains, and gripper pads.
- PTS: multi-tier pallet transfer straight into/out of curing racks
- RT & battery rack carriers: compact retrofit for existing curing rooms
- Loaders, unloaders, cubers, and articulated palletizing robots
- Spares: drive rollers, proximity sensors, servo motors, clamp pads
Block Splitters (AF / TSP-12) & Optimas Vacu-Magnet Lifters
Hydraulic splitters AF-3HS, AF-3-400H, AF-3-500H, and TSP-12 split blocks 60-540 mm high and 200-1000 mm wide with controlled blade descent for natural-stone textures. Optimas Vacu-Magnet 500 and 1500 lift 500-1500 kg stone and curb units. We source blades, seals, and vacuum pads.
- AF-3HS / 400H / 500H & TSP-12: product height 60-540 mm, width 200-1000 mm
- Optimas Vacu-Magnet 500: 80 cbm/h vacuum, 500 kg max load, 70 kg unit
- Optimas Vacu-Magnet 1500: 160 cbm/h vacuum, 1500 kg max load, 175 kg
- Spares: splitting blades, hydraulic cylinders, vacuum pumps, suction pads
Poured Precast Concrete Lines (Feeders, Tables & Demolding)
Wet-pour precast lines comprise screw, slewing-lift, fork, and crane-hopper concrete feeders, lifting/tilting/monorail trolleys, external/oscillating/self-propelled table vibrators, and vacuum or clamp demolding units for U-gutters. We source augers, vibrators, trolley drives, and vacuum cups.
- Concrete feeders: screw, fork, slewing-lift, and crane hanging hoppers
- Trolleys: lifting, tilting, and monorail concrete transfer units
- Table vibrators: external, oscillating, poker, and self-propelled models
- Demolding for U-channels: vacuum cups, clamp pads, vibrators, rollers
PV Solar Panel Recycling, Ash Solidification & Pelletizing
Solar panel recycling integrates the PV Frame Separator (~400 panels/day, 5.5 kW), PV Recycle Hammer (~240 panels/day, 30.5 kW), and K-WST600 two-stage crusher (22 + 15 kW, 60/700 rpm, 8-12 mm screen). Ash solidification uses PS/S/CV presses and DMK mixers. We supply hammers, rotors, and screens.
- PV Frame Separator (~400 panels/day, 5.5 kW) & Hammer (~240/day, 30.5 kW)
- K-WST600 two-stage crusher: 600 x 800 mm feed, 22 kW + 15 kW, 60/700 rpm
- Ash, slag, gypsum & glass solidification with PS/S/CV presses & DMK
- Spares: hammer blades, screens (40 mm / 8-12 mm), FMP flat dies, filters
Mold-Vibration vs. Table-Vibration & Mold-Inversion Block Presses
For high-throughput wall and paving blocks (60-215 mm high), servo-driven S-Series mold-vibration machines (S-3, S-4, S-6; dual 15-22 kW vibrators) achieve cycles down to 6 seconds.
TGD-4B/5B/6B suspend the mold frame to isolate vibration from the main chassis, TGM integrates horizontal bar feeding, and TGF-4 uses a four-side opening mold for decorative blocks.
Table-vibration PS (30-37 kW, pallets up to 1,400 x 1,080 mm), TG-BSV, CFV, and ML-100 lines combine automatic mold change and face-mix feeders for multi-product masonry and hardscape plants. Heavy civil units up to 1,500 x 1,250 x 500 mm (2,500 kg incl.
mold) are produced on CV-10S and CV-15H mold-inversion presses.
Batching & Mixing Selection: DM, RM, DMK High-Shear & OM Mixers
Vertical pan mixers DM-8 to DM-81 (150-1,500 L) and horizontal-axis RM-24 to RM-120 (500-2,500 L) handle zero-slump concrete batches; DM flat drum bottoms simplify cleaning and liner inspection.
Tilting high-shear DMK mixers (10-4,000 L charge) pair rotating inclined pans with independent agitators for rapid dispersion and granulation.
For fibers, GRC, viscous resins, and powders with extreme density differences, bladeless oscillating OM mixers (5-1,000 L, 0.5-75 kW) blend without paddles or material heating. Custom 3D-CAD molds machined on CNC centers and quench-hardened can also be fitted to third-party block machines.
Curing Handling (PTS / RT), Splitters & Poured Precast Lines
Automated material flow relies on multi-tier PTS pallet transporters, compact RT and battery-powered rack carriers, loaders/unloaders, cubers, and articulated robots engineered to retrofit existing curing kilns.
Downstream finishing pairs AF-3HS/400H/500H and TSP-12 splitters (60-540 mm height) with Optimas Vacu-Magnet 500/1500 lifters (80-160 cbm/h).
For wet-pour civil precast such as U-shaped drainage gutters, Tiger Chiyoda supplies screw/fork/crane concrete feeders, monorail and tilting trolleys, external/oscillating/self-propelled table vibrators, and vacuum or clamp-reaction demolding units.
PV Solar Recycling, Ash Solidification & Japanese Plant Lineage
Environmental plants cover end-of-life PV module separation (Frame Separator ~400 panels/day, Recycle Hammer ~240 panels/day, and K-WST600 two-stage backsheet crusher at 22 + 15 kW with 8-12 mm screen), fly-ash and biomass-ash solidification into roadbed blocks via PS/S/CV presses and DMK mixers, plus FMP flat-die pelletizers.
Founded in 1950 in Okayama, Tiger Chiyoda Co., Ltd. adopted its current name in 2024 upon integrating Chiyoda Machinery and runs plants in Okayama, Saitama, and Sakaide (export arm: Tiger International).
Specify exact Japanese series codes to distinguish Japanese OEM plant specs from unrelated Tiger-branded machines.
Tiger Chiyoda and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Tiger Chiyoda and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Tiger Machine
- Equipment and parts for Calsitec
- Equipment and parts for Besser
- Equipment and parts for Columbia Machine
- Equipment and parts for Teeyer Intelligent
Documents and sources
- Tiger Chiyoda Co., Ltd. — corporate profile, plants (Okayama, Saitama, Sakaide) and 2024 merger history
- Tiger Chiyoda — end-to-end engineering, plant fabrication, installation and maintenance
- Tiger Chiyoda — block machines S, TGD, TGM, TGF, PS, TG, CFV, ML and CV series specs
- Tiger Chiyoda — batching and mixing equipment: DM, RM, DMK high-shear and OM mixers
- Tiger Chiyoda — custom 3D-CAD mold design, CNC machining and heat-treatment quenching
- Tiger Chiyoda — PTS/RT handling, cubers, AF/TSP-12 splitters and Optimas Vacu-Magnet
- Tiger Chiyoda — poured precast concrete table vibrators (external, oscillating, self-propelled)
- Tiger Chiyoda — vacuum and clamp demolding equipment for U-shaped concrete gutters
- Tiger Chiyoda — OM bladeless soft mixers (5-1,000 L) for fibers, resins and GRC
- Tiger Chiyoda — discarded solar panel recycling line (PV Frame Separator, Hammer, K-WST600)
- Tiger Chiyoda — fly ash and biomass ash solidification plants using PS/S/CV presses and DMK mixers
