Innomar / Innomar Technologie Parametric Sub-Bottom Profilers (SBP & SES-2000)
Selection and quotation of Innomar / Innomar Technologie parametric sub-bottom profilers (formerly SES-2000) from 0.5 m shallow-water portable units to 11,000+ m deep-sea systems, USV/ROV heads, 3D arrays, and spare parts.
Innomar Shallow-Water SBP (Compact, Light, Standard)
Innomar essential, compact, light, and standard sub-bottom profilers operate in 0.5–500 m water depth with up to 50 m sediment penetration. Their narrow sub-5° beam at 4–15 / 100 kHz suppresses reverberation. Service parts cover 15–30 m cables, transducers, 12/24 V DC adapters, and mounts.
- Depth: 0.5 to 500 m
- Penetration: up to 30–50 m
- Frequencies: 4–15 / 100 kHz
- Spares: cables, transducers, mounts
Innomar Deep-36 and Deep-36-RP Deep-Water Profilers
Innomar deep-36 and deep-36-rp systems reach 5–6,000 m water depth with up to 150 m penetration. A 36 kHz primary channel (248 dB peak) delivers a 3.5°×3.5° beam up to 40 Hz with roll/pitch stabilization. Assemblies include 19" 10U transceivers (56 kg), 245 kg transducers, and 20–50 m cables.
- Depth: 5 to 6,000 m
- Penetration: up to 150 m
- Beam: 3.5°×3.5° at 2–7 / 36 kHz
- Hardware: 19" 10U, 20–50 m cables
Innomar Medium-100 Offshore Sub-Bottom Profilers
The Innomar medium-100 targets offshore surveys from 2 to 2,000 m water depth with up to 70 m penetration at 4–15 / 100 kHz. It supports FM chirp, 24-bit waveform logging, and heave/roll beam stabilization. Spares include IP65 shock-absorbing enclosures, hull frames, and 20–50 m cables.
- Depth: 2 to 2,000 m
- Penetration: up to 70 m
- Pulses: 4–15 / 100 kHz, FM chirp
- Hardware: IP65 enclosure, frames
Innomar Deep-15 Full-Ocean-Depth Profilers
The flagship Innomar deep-15 sub-bottom profiler operates across full ocean depths from 10 to 11,000+ m with up to 200 m seabed penetration. Its 0.8–18 kHz frequency band and heave, roll, and pitch beam stabilization sustain spatial resolution for deep-sea drilling and oceanography.
- Depth: 10 to 11,000+ m
- Penetration: up to 200 m
- Frequencies: 0.8–18 kHz
- Stabilization: H / R / P active
Innomar USV, ASV, and ROV Remotely Operated Profilers
Innomar essential (80 m depth rating), compact-usv, standard-usv, medium-usv (2–2,000 m), and standard-rov (1–400 m) integrate transceiver electronics inside the acoustic head. Replacement assemblies cover SBP Interface Units (SIU), 100–240 V AC power adapters, pole fairings, and motion links.
- Platforms: USV, ASV, AUV, ROV
- Range: 0.5–2,000 m (80 m rating)
- Stabilization: ±10° optional
- Parts: SIU unit, pole fairings
Innomar Multi-Transducer 3D Systems (Quattro, Sixpack)
Innomar quattro (four transducers, 0.5–600 m), sixpack (0.5–1,000 m), and standard dual head (0.5–800 m) capture high-density 3D sub-seabed grids. Operating at 4–15 kHz with 50–60 m penetration, they locate buried pipelines, cables, boulders, and archaeological structures across wide corridors.
- Models: Quattro, Sixpack, Dual
- Depth: 0.5 to 1,000 m
- Penetration: up to 50–60 m
- Output: 3D sub-bottom gridding
Innomar SESWIN Acquisition and ISE Post-Processing Software
All Innomar profilers ship with SESWIN online acquisition software, SES-Convert for exporting SES3 full-waveform data to SEG-Y, XTF, and ASCII, and SES-NetView for remote Ethernet QA. The optional ISE post-processing suite analyzes multi-ping sub-bottom profiles with COM, UDP, RS232, and NMEA links.
- Acquisition: SESWIN online control
- Post-processing: Innomar ISE
- Formats: SES3, SEG-Y, XTF, ASCII
- Interfaces: Ethernet, UDP, RS232
Legacy Innomar SES-2000, SES-96, and Discontinued Systems
Before 2021, Innomar systems were branded SES-96, SES-2000, and Innomar SES. Discontinued models include smart (succeeded by essential), autonomous ASV, medium-70 (succeeded by deep-36), sidescan-100 extension, and iplc-1500 telemetry. We source replacement assemblies and service legacy units.
- Legacy names: SES-96, SES-2000
- Discontinued: smart, medium-70
- Other legacy: sidescan-100, iplc-1500
- Support: spares and repair
Parametric Acoustic Technology and Series Selection
Founded in Rostock in 1997 and part of NORBIT ASA since July 2024, Innomar Technologie GmbH builds parametric sub-bottom profilers (formerly branded SES-96, SES-2000, and Innomar SES) using non-linear interaction of two high-frequency beams.
This generates narrow sub-5° beams without distinct sidelobes and high 80% relative bandwidth.
Shallow-water systems (essential, compact, light, standard) cover 0.5 to 500 m depth with 30 to 50 m sediment penetration.
High-power offshore systems (medium-100, deep-36, deep-36-rp, and deep-15) extend operating ranges from 2 m down to 11,000+ m with up to 200 m penetration and heave, roll, and pitch beam stabilization.
Autonomous Platforms, 3D Arrays, and Data Software
Remotely operated models (essential rated to 80 m submergence, compact-usv, standard-usv, medium-usv, and standard-rov) house transceiver electronics inside the acoustic head alongside SBP Interface Units (SIU) and optional ±10° stabilization.
Multi-transducer quattro (4 heads) and sixpack arrays capture high-density 3D sub-seabed grids for cable depth-of-burial, pipeline routing, UXO, and archaeology. Software includes SESWIN acquisition, SES-Convert (SES3 to SEG-Y, XTF, ASCII), SES-NetView QA, and ISE post-processing.
Innomar Technologie and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Innomar Technologie and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Seatronics
- Equipment and parts for Impact Subsea
- Equipment and parts for Imagenex Technology
- Equipment and parts for Unidata
Documents and sources
- Innomar — Official parametric sub-bottom profilers homepage
- Innomar — About Innomar Technologie GmbH and NORBIT ASA
- Innomar — Product overview and legacy SES-96 / SES-2000 naming
- Innomar — Shallow-water SBP models (essential, compact, light, standard)
- Innomar — High-power SBP solutions (medium-100, deep-36, deep-15)
- Innomar — Technical specification of deep-36 SBP
- Innomar — Remotely operated solutions for USV, ASV, and ROV
- Innomar — Multi-transducer 3D SBP (quattro, sixpack, dual head)
- Innomar — Software suite (SESWIN, ISE, SES-Convert, SES-NetView)
- Innomar — Discontinued and legacy products archive
