ULBRICH / Ulbrich Stainless Steels & Special Metals: Precision Strip, Foil & Wire

Cold-rolled strip coil, Ultralite foil, fine braid wire, flat wire, shaped wire, and PV ribbon from Ulbrich Stainless Steels & Special Metals (ULBRICH) in 165+ alloys per ASTM, AMS, and DIN.

Cold-Rolled Precision Strip Coil

Cold-rolled precision strip is produced in gauges from 0.0003 to 0.120 inches across 140+ strip alloys with standard thickness tolerances of +/- 5%. Slit coil reaches 0.188 inches thick and 59.5 inches wide. Production uses 6 Sendzimir mills, 8 annealing lines, and tension leveling.

  • 0.0003" to 0.188" gauge
  • Up to 59.5" slit width
  • 6 Sendzimir mills
  • 8 annealing lines

Ultra-Thin Foil & Ultralite Grades

Precision foil and Ultralite alloys are rolled from stainless steel, nickel, titanium, cobalt, niobium, zirconium, and precipitation-hardening grades down to 0.0003 inches. Ribbon-wound slit coil starts at 0.00039 inches (0.010 mm). Edges follow AISI No. 1 round, No. 3 slit, and No. 5 square specs.

  • Gauges from 0.0003"
  • Stainless, Ni, Ti, Co, Nb
  • AISI No. 1 / 3 / 5 edges
  • Camber 13 mm in 2.5 m

Precision Fine & Medical Braid Wire

Precision fine and braid wire covers round diameters below 0.00075 inches and flat widths from 0.035 to 1.50 inches for medical catheter braiding and aerospace assemblies. The Braid Wire Accelerator program supplies 304V, 304LVM, 316LV, MP35N, L605, Nitinol, and tungsten on Steeger and DIN spools.

  • 0.0002"–0.335" range
  • 304V, 316LV, MP35N, L605
  • Nitinol & tungsten wire
  • Steeger & DIN spools

Precision-Rolled Flat Wire

Flat wire is drawn and rolled from round rod with intermediate anneals across thicknesses from 0.0002 to 0.210 inches (0.00508 to 5.33 mm) and widths from 0.002 to 1.00 inches. Available in stainless steels, Nitinol, cobalt superalloys, tungsten, and clad metals with square or round edges.

  • 0.00508–5.33 mm thick
  • 0.05–25.40 mm wide
  • Square & round edges
  • Intermediate annealing

Custom Shaped & Profile Wire

Shaped profile wire is engineered at Ulbrich Shaped Wire in North Haven to exacting cross-sectional tolerances for net or near-net component geometry. Standard square, wedge, and custom profiles reduce downstream machining across stainless, titanium, aluminum, and carbon alloy grades.

  • Net & near-net profiles
  • Square, wedge & custom
  • Less machining waste
  • Stainless, Ti & Ni grades

PV Ribbon & Solar Interconnect Wire

Ulbrich PV Ribbon Wire delivers interconnect conductors engineered to boost electrical output in photovoltaic modules. The range includes standard tinned flat copper wire, Light Capturing Ribbon (LCR), multi-tabbing ribbon, and connectors tailored for thin-film solar panels.

  • Tinned flat copper
  • Light Capturing Ribbon
  • Multi-tabbing ribbon
  • Thin-film connectors

Precision Cut-to-Length Sheets & Blanks

Precision blanking and cut-to-length lines process coils up to 30 inches wide and down to 0.004 inches thick with automated flattening and stacking. Custom sheets and blanks are supplied in 303, 304, 304L, 316L, 316, 17-4PH stainless steels and specialty alloys.

  • Widths up to 30 inches
  • Gauges from 0.004"
  • 303, 304L, 316L, 17-4PH
  • Auto-stacked CTL blanks

165+ Specialty Alloys, Bi-Metals & Coatings

Ulbrich processes 165+ alloys including Inconel, Hastelloy, Monel, Titanium Grade 1/2/9 and Ti 15-3-3-3, cobalt MP35N, L-605, Alloy 188, niobium, tantalum, and SPCCA/SPCCS bi-metals. Surface options cover peelable plastisol PVC, PTFE Molykote, nitrile rubber, and electroplating.

  • 165+ engineered alloys
  • Inconel, Hastelloy, Ti
  • SPCCA & SPCCS bi-metals
  • PVC, PTFE & plating

Ulbrich Stainless Steels & Special Metals Manufacturing Profile

Founded in 1924 in Connecticut, Ulbrich Stainless Steels & Special Metals, Inc. (ULBRICH) operates 14 manufacturing mills, service centers, and sales offices across North America, Europe (Ulbrich of Austria, Ulbrich Europe Metals in Germany), Mexico (Ulbrinox), and Asia (Shanghai).

Core rolling capabilities include 6 Sendzimir mills, 3-4 hi mills, 8 atmosphere-controlled annealing lines, tension leveling, and precision wire drawing across more than 165 specialty alloys and 20,000 metal products.

Tolerances, Edge Conditioning & Spool Formats

Precision strip coil and Ultralite foil start at 0.0003 inches (0.0075 mm) with +/- 5% thickness tolerance and +/- 0.005 inches width tolerance. Slit coils reach up to 59.5 inches wide with AISI No. 1 round, No. 3 slit, No. 5 square, or broken-corner edges.

Fine braid wire, flat wire, and shaped wire are delivered in annealed to extra-full-hard and spring tempers on Steeger (15, 26, 30 mm) and DIN (80, 100, 125, 160) spools or oscillate-wound coils.

NADCAP Testing & Regulated Industry Approvals

Ulbrich operates an in-house NADCAP-accredited testing laboratory performing tensile, bend, metallography, IGA/IGO, alpha-layer, Rockwell, and Vickers hardness verification to AMS, ASTM, MIL, and DIN standards.

Materials are approved for aerospace engine builders including Rolls-Royce, GE, and Pratt & Whitney, as well as medical catheter braiding (Braid Wire Accelerator), automotive sensors, oil & gas, and solar photovoltaic interconnects.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.