Unigen Steel Engineering Heavy Machined Assemblies

Unigen Steel Engineering Srl (Brescia, Italy) machines medium and large industrial assemblies up to 50 tonnes and 10 meters: rolling mill stands, spindle shafts, chocks, gearboxes, gears up to 7500 mm, furnace rolls, and marine drums.

Spindle shafts and clutches

Unigen Steel Engineering manufactures forged steel spindle shafts with rotating or fixed heads and hot-assembled sleeves up to 11,530 mm in length and 630 mm in diameter for rolling mill drives. High-resistance steel transmission clutches with teeth and brake are also built for tube lines.

  • Lengths up to 11,530 mm, body dia up to 630 mm
  • Fixed heads up to 1,010 mm and hot-fitted sleeves
  • Forged and high-resistance alloy steels
  • Toothed brake clutches for heavy tube drives

Rolling mill stands and chocks

Unigen Steel Engineering produces 8-stand wire rolling lines with lubrication and water cooling up to 28 mm wire diameter, plus rail stands for UIC 60 mm profiles. Forged steel chocks of 900×1300 mm with hydraulic balancing and 500×500 mm wire-line chocks are milled and bored for bearings.

  • 8-stand wire mills up to 28 mm wire diameter
  • UIC 60 mm rail rolling stands, factory-tested
  • 900×1300 mm forged chocks with hydraulic balance
  • 500×500 mm wire-mill chocks ready for bearings

Entry guides and coiler segments

Unigen Steel Engineering machines entry roller guides for coil finishing stands up to 2000 mm in heat-processed electrowelded steel and wire guides up to 80–120 mm in forged steel. Coiler expansion segments of 2000–2500 mm use nodular iron with bronze pads or nitrided forged steel.

  • Coil finishing guides up to 2000 mm width
  • Wire entry guides for Ø 80 mm and Ø 120 mm
  • Expansion segments L 2000–2500 mm, Ø 450 mm
  • Bronze sliding pads, nitrided and induction steel

Pinions, gears and gearboxes

Unigen Steel Engineering produces rolling mill pinion shafts up to L 3500 mm × Ø 1200 mm, marine pinions of Ø 350–400 mm, and ring gears from 500 to 7500 mm diameter with Gleason spiral, chevron, or Hirth toothing. Welded steel gearboxes include forced lubrication and speed-change units.

  • Gear diameters from 500 mm up to 7500 mm
  • Rolling mill pinion shafts L 3500 × Ø 1200 mm
  • Gleason spiral, chevron, and Hirth tooth profiles
  • High-speed gearboxes with forced oil lubrication

Furnace rolls and winch drums

Unigen Steel Engineering builds heat-treatment furnace and rolling mill rolls from 2500 to 5000 mm long and 150 to 800 mm diameter using high-temperature centrifugally formed stainless steel or forged steel with welded trunnions. Marine winch drums run 2000–3500 mm × Ø 800–1300 mm.

  • Furnace and mill rolls L 2500–5000 × Ø 150–800 mm
  • High-temp stainless and forged alloy trunnions
  • Grooved marine winch drums L 2000–3500 mm
  • Single-piece forged drums Ø 800–1300 mm

Shafts and forged crankshafts

Unigen Steel Engineering mills and turns forged 40NiCrMo7+QT crankshafts (700×300×1800 mm) and eccentric lifting shafts (L 2200 mm × Ø 550 mm). Every forged shaft undergoes dimensional inspection plus ultrasonic and magnetic particle testing under UNI-EN 10228 class 3.

  • Forged 40NiCrMo7+QT quenched and tempered steel
  • Crankshaft dimensions 700 × 300 × 1800 mm
  • Eccentric lifting shafts L 2200 × Ø 550 mm
  • Ultrasonic and magnetic NDT per UNI-EN 10228 Cl.3

Press slides and extrusion heads

Unigen Steel Engineering designs, welds, and machines central press slides in steel and bronze measuring 1000×1000 mm by 3500 mm long at 10 tonnes weight. For plastic film and recovery lines, forged steel twin-screw plasticizer cylinder heads (L 1500 mm) are built with integrated air cooling.

  • Central press slides 1000×1000×3500 mm, 10 t
  • Steel structure with replaceable bronze wear guides
  • Twin-screw plasticizer cylinder heads L 1500 mm
  • Forged steel housing with air-cooling circuit

Motor bases, exchangers and spares

Unigen Steel Engineering bores GS600 nodular iron 12-cylinder V diesel motor bases with 8 bar water and 12 bar oil tightness tests. The plant also builds high-temperature stainless steel air-water heat exchangers, S355J2 mud separator drums, and GS600 chain guides (250 mm pitch, Ø 600 mm).

  • V12 diesel motor bases in GS600, 8/12 bar tested
  • High-temp stainless air-water heat exchangers
  • Mud separator drums with gears in S355J2 steel
  • GS600 chain guides, 250 mm pitch, L 250 × Ø 600 mm

Unigen Steel Engineering Brescia workshop and machining limits

Founded in 1988 in Brescia, northern Italy, Unigen Steel Engineering Srl operates a ~5000 m² facility across three bays served by four bridge cranes over 10 tonnes, including 32-tonne and 50-tonne cranes for heavy industrial handling.

CNC turning, milling, boring, and mechanical carpentry cover medium and large workpieces up to 50 tonnes and 10 meters in length (with spindle shafts up to 11,530 mm), backed by high-precision ZEISS coordinate measuring inspection.

International standards, materials and non-destructive testing

Production follows UNI-EN/DIN (Europe), AISI/SAE (United States), and GOST (Russia) standards using steel from Italian forgers and millers. Critical forged shafts in 40NiCrMo7+QT pass dimensional, ultrasonic, and magnetic particle testing per UNI-EN 10228 class 3.

Materials span forged and electrowelded steel, S355J2 structural steel, nodular iron GS600, bronze sliding pads, and high-temperature centrifugally formed stainless steel. Diesel motor bases undergo 8 bar water and 12 bar oil tightness testing.

Core industrial sectors served worldwide

Steel plants rely on Unigen Steel Engineering for 8-stand wire mills, UIC 60 mm rail stands, hydraulic rolling mill chocks, spindle shafts, entry guides, furnace rolls, and coiler expansion segments.

Shipbuilding, energy, cement, press, tube, and plastic recovery lines order marine winch drums, ring gears (500–7500 mm), speed-change gearboxes, 10-tonne steel-bronze press slides, air-water heat exchangers, and twin-screw plasticizer cylinder heads.

Unigen Steel Engineering and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Unigen Steel Engineering and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.