UNIFILL Vertical Thermoforming & Packaging Machines (UNIFILL Leading Thermoforming)

Italian vertical Form-Fill-Seal machinery (TF-X1, TF-X3, TF-X5, TF-X7, TF-K) and RESNOVA suppository lines for squeezable, peelable, QwikPak and paper unit-doses: technical specifications and project sizing.

TF-X1 and TF-X3 Series: 1–130 ml Monodoses

TF-X1 (up to 30 cycles/min, 1–50 ml) and TF-X3 (up to 35 cycles/min, 1–130 ml) form, fill and seal portion packs from rollstock. Intelligent sensors assist operation for food, pharma and chemical lines. Service parts cover heaters, dosing valves, seals, moulds and cutting blades.

  • TF-X1: 1–50 ml, up to 30 cycles/min, 80×120 mm area
  • TF-X3: 1–130 ml, up to 35 cycles/min, 160×150 mm area
  • Footprint: TF-X1 3800×1200×1750 mm; TF-X3 6787×1365×2038 mm
  • Parts: forming moulds, heaters, dosing seals, knives

High-Output TF-X5 Vertical FFS Line

The TF-X5 vertical thermoform-fill-seal machine delivers up to 35 cycles/min across a 1–250 ml dosing range with 260×120–150 mm or 300×120–150 mm mould areas. Dual powered reel shafts enable non-stop splicing. Dosing units, cutting heads, applicators and TCo kits are replaceable.

  • Up to 35 cycles/min, 1–250 ml, film 250–480 µm, reels 100–300 mm
  • Mould width: 260 mm (30 kW / 50 A) or 300 mm (32 kW / 60 A)
  • Air 1100 Nl/min at 6 bar, 6650×3250×2500 mm, weight 3500 kg
  • Options: cap/stick/straw applicators, Ultra-Clean, vision

Large-Format TF-X7 Thermoformer (100–500 ml)

TF-X7 automates 100–500 ml stand-up and non-stand-up packs at up to 35 cycles/min using 200–440 mm webs and EVOH or PVDC barrier films. A 2-shaft buffering reel unit supports continuous film feed. Service parts include wide moulds, sealing jaws, dosing nozzles and cutting tools.

  • Up to 35 cycles/min, 100–500 ml (up to 2×500 ml/cycle)
  • Mould area 350×150–220 mm, web width 200–440 mm, 250–480 µm
  • Dimensions 9700×3550×2500 mm, weight 4200 kg, air 800 Nl/min
  • Modules: single/double dosing, high-precision cutter, 65 A

TF-K Entry Series and Classic TF-01 / TF-02 / TR86

TF-K runs 1–100 ml monodoses at 15 cycles/min in a balcony frame built for fast cleaning and tool change-overs. Starting in 2000, TF-K, TF-01 and TF-02 succeeded legacy TR86 machines. Replacement parts cover heaters, seals, dosing pistons, moulds and pneumatic valves.

  • TF-K: 15 cycles/min, 1–100 ml, 160×120 mm mould, 16 kW
  • Web 100–240 mm, 250–480 µm film, air 800 Nl/min
  • Dimensions 4700×1110×2500 mm, weight 2700 kg, EVOH/PVDC
  • Legacy support: TF-01, TF-02 and TR86 installed base

RESNOVA Suppository and Ovule Lines (10/15/25/35)

RESNOVA machines form, fill and seal suppositories (0.2–4 ml) in PVC/PE or ALU/PE webs at up to 12,000–35,000 units/h. Lines feature AISI 316L dosing, peristaltic feed, cooling tunnels and micro-hole detection. Replacement parts cover ALU change-over kits, seals, pumps and TIP 106 link.

  • RESNOVA 10 / 15 / 25 / 35: 0.2–4 ml, up to 12k–35k units/h
  • RESNOVA 15: 105×80 mm area, 5100×1500×2300 mm, 3720 kg
  • Film: PVC/PE 100–150 µm and ALU/PE 75–150 µm (aluminum kit)
  • Parts: AISI 316L dosing unit, peristaltic pump, pinhole sensor

QwikPak, Paper Solution and TCo Change-Over Tooling

Beyond squeezable (cap or straw) and peelable (symmetrical or asymmetrical stick) packs, UNIFILL runs QwikPak soft bottles and recyclable Paper Solution cellulose packs. Tooling Change-over (TCo) kits adapt active lines to new container profiles using precision sealing jaws and cutting dies.

  • QwikPak: flexible soft bottle with or without closure cap
  • Paper Solution: thermoformed recyclable paper-based unit-doses
  • TCo kits: mould, sealing and cutting sets for format changes
  • Wear items: pre-cut snap-off blades, sealing profiles, guides

Sizing UNIFILL Vertical FFS Lines by Dose and Speed

Machine selection spans from compact TF-K (15 cycles/min, 1–100 ml) and entry-level TF-X1 (up to 30 cycles/min, 1–50 ml) up to TF-X3 (1–130 ml), TF-X5 (1–250 ml) and TF-X7 (100–500 ml) running at up to 35 cycles/min.

Depending on product viscosity, lines integrate single or double dosing stations, stick/straw/cap applicators, single or double labelling, Ultra-Clean enclosures and inline vision inspection cameras.

Barrier Films, Paper Solution and RESNOVA Pharma Lines

UNIFILL thermoformers process 250–480 µm heat-sealable webs including EVOH and PVDC high-barrier structures, as well as eco-friendly Paper Solution cellulose laminates for squeezable and peelable unit-doses.

Dedicated RESNOVA 10/15/25/35 pharmaceutical machines fill 0.2–4 ml suppositories and ovules at up to 12,000–35,000 units/h in PVC/PE or ALU/PE with AISI 316L dosing, cooling tunnels and patented micro-hole detection.

Non-Stop Reel Feeding and Tooling Change-Over (TCo)

TF-X5 and TF-X7 incorporate two powered reel shafts with a web buffer to splice fresh rolls without stopping production. Balcony construction separates drive mechanics from the product zone for fast sanitation.

Tooling Change-over (TCo) kits allow plants to shift pack geometry across food, beverage, cosmetic, chemical and pharma applications while targeting over 95% filling accuracy and over 90% OEE.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.