Focuslight diode lasers and micro-optics
Selection of Focuslight products: FM01 single emitters, LCS and HCS02 bars, VS and GS stacks, SP17 and SP18 pump modules, fiber-coupled modules, FAC and SAC lenses, homogenizers and line beam systems.
FM01, NV02, COC11 single emitters
Open-package single-emitter diode lasers with AuSn hard solder packaging. FM01 in the proprietary F-mount gives 10 W at 808 nm and 12 W at 915, 940 and 976 nm; -Y versions come with a FAC lens. NV02 with a dust-proof design and COC11 with a copper-clad plate give 10 or 12 W.
- FM01: 12 W at 915-976 nm
- FM01-10-808: 10 W at 808 nm
- NV02: dust-proof design
- COC11: industry standard footprint
LCS, MCC09, HCS02 laser bars
Single bars with micro-channel or conduction cooling. Typical LCS builds give 100 W at 976 nm and 30 W at 1470 nm with smile below 1 µm. HCS02 in an industry standard footprint gives 60 W at 808 and 1060 nm and 80 W at 940 and 976 nm. Typical MCC09: 100-120 W CW, 500 W QCW.
- LCS: smile below 1 µm
- LCS 980 nm: rollover point 180 W at 190 A
- HCS02: 80 W at 940 and 976 nm
- MCC09: 500 W in QCW mode
VS, HA18, GS and AA05 stacks
Stacks with micro-channel water cooling (VS300, VS120, HA18) and conduction cooling (GS20, GS04, GS02, AA05). VS120 and VS300 are built from 2-20 bars; a typical 15-bar VS120 gives 7500 W QCW. GS20 gives 400 W per bar at 8% duty cycle, and its 5-bar basic module weighs 68 g.
- GS20: up to 500 W per bar at 1%
- AA05: 6000 W at 807 nm QCW
- GS20: 16.45 cm³ basic module
- GS02: 3750 W, dust-proof
SP17 and SP18 side pump modules
Water-cooled QCW side pump modules for solid-state lasers. SP17 with 150 bars gives a typical peak power of 30 kW for a 10 mm crystal, SP18 with 25 bars gives 5 kW for a 4 mm crystal. Small signal gain is above 55 for SP17 and above 30 for SP18.
- SP17: 30,000 W peak power
- SP18: 4 mm crystal diameter
- SP17: gain above 55
- Fluorescence uniformity above 90%
Fiber-coupled modules
Emitter-based: FCSE08 gives 7 W at 808 nm, FCMSE55 15 or 25 W with a fixed fiber, FCMSE58 up to 30 W at 976 nm with a detachable fiber. Bar-based: LM up to 55 W, FG in a hermetically sealed housing, ND at 120-150 W and water-cooled MF up to 500 W at 980 nm.
- MF: up to 500 W at 980 nm
- MF: up to 400 W at 808 nm
- FG3008: 60 W at 981 nm
- FCMSE58: detachable 200 µm fiber
FAC, SAC and BTS collimators
Acylindrical FAC lenses collimate the fast axis, with focal length from 0.16 mm on FAC160 to 7.7 mm on FAC7700. SAC and TEL arrays handle the slow axis, and BTS evens out the beam parameter product of a bar for fiber coupling. Blue laser versions exist.
- FAC160: 0.16 mm focal length
- FAC7700: 7.7 mm focal length
- BTS: 0.2, 0.4 or 0.5 mm pitch
- SAC 50/500: 15 mrad divergence
Homogenizers and CBS modules
Micro-lens array homogenizers give top hat, rectangular, square or line profiles with a typical full angle of 0.20-11.21°, with up to 1% non-uniformity. Materials: fused silica, CaF2. The CBS module, 30.5 mm in diameter and 80 mm long, gives a 6×6 or 10.5×10.5 mm field.
- Homogenizers: efficiency up to 90%
- Homogenizer wafers up to 300 mm
- CBS: input up to 120 W
- CBS: 400 µm fiber
Line beam systems
Subsystems for display, glass and chip production. Typical Activation Line IR builds at 940 nm give 5000-18,000 W with a 155×0.4 or 350×0.4 mm line. DLight S for wafer annealing: 1500 W, 12 mm × 70 µm beam. Flux H4000X: 4 kW at 976 nm, 2-200 mm beam; Flux H6000CM gives 6000 W.
- DLight S: ±1 µm width stability
- Flux H4000X: uniformity above 97%
- Flux H6000CM: 480 mm working distance
- Activation Line IR: up to 18,000 W
Choosing Focuslight products
Focuslight Technologies Inc. was founded in 2007 and is headquartered in Xi'an, China; it is a public company listed in Shanghai (688167). The company develops and manufactures laser sources and materials, optical components, and photonics modules and systems.
It has manufacturing facilities in China, Germany, Switzerland, Singapore and Malaysia.
In March 2017 Focuslight completed the acquisition of LIMO Lissotschenko Mikrooptik GmbH; its German base is LIMO GmbH in Dortmund.
The range covers open-package diode lasers from single emitters to stacks and pump modules, fiber-coupled modules, micro-optics for beam collimation and homogenization, and line beam systems.
Plastic welding and beam processing
Flux S is an air-cooled 150 W source (915 or 976 nm) for laser soldering, plastic welding and surface treatment. Activation LPH process heads shape the beam for welding and soldering: up to 120 W with an SMA905 connector and up to 500 W with LD80. Activation patch cords are rated for 150 or 500 W.
Flux H4000X uses a pyrometer for closed-loop control of the processing zone temperature. Flux H6000CM for chip packaging adjusts the beam within 15-60 mm, with focal depth of at least ±1 mm. UV Line is intended for solid-state laser lift-off (LLO).
Test and assembly systems
Focuslight burn-in and lifetime systems for bars, single emitters and fiber-coupled modules run in CW and QCW modes at 15-35 °C: typical builds hold 240, 72 or 100 bars, 200 emitters or 120 modules. The FL-FF-100 far field system works at 600-1000 nm with up to 100 W and angles up to 120°.
The FAC pickup and loading machine runs a 3.5 s cycle per part with ±0.025 mm positioning accuracy. The FLSM-LL80 system measures the pitch of V-groove and fiber array assemblies with up to 128 channels and 3σ repeatability below 0.1 µm.
Focuslight and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Focuslight and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for HGTECH
- Equipment and parts for NPI Lasers
- Equipment and parts for EKSPLA
- Equipment and parts for Wasatch Photonics
Documents and sources
- Company profile — Focuslight Technologies
- Company profile — Chinese version
- Locations — production sites
- Open-package diode lasers — overview
- F-mount FM01 — specifications
- NV02 — specifications
- COC11 — specifications
- LCS — specifications
- MCC09 — specifications
- HCS02 — specifications
- VS300 — specifications
- VS120 — specifications
- HA18 — specifications
- GS20 — specifications
- AA05 — specifications
- GS04 — specifications
- GS02 — specifications
- SP17 — specifications
- SP18 — specifications
- FCSE08 — specifications
- FCMSE55 — specifications
- FCMSE58 — specifications
- LM — specifications
- FG — specifications
- ND — specifications
- MF — specifications
- Fast axis collimators — specifications
- SAC and TEL arrays — specifications
- Beam transformation systems — specifications
- Blue diode laser optics — overview
- Homogenizers — specifications
- Compact beam shaper — specifications
- Activation Line IR — specifications
- DLight S — specifications
- Flux H for Mini/Micro LED — specifications
- Flux H for chip packaging — specifications
- UV Line — description
- Flux S — specifications
- Activation LPH process heads — specifications
- Activation patch cords — specifications
- Bar burn-in and lifetime system — specifications
- Single emitter burn-in system — specifications
- Emitter FCM burn-in system — specifications
- Far field test system — specifications
- FAC pickup and loading — specifications
- Pitch error measurement system — specifications
