Industrial Bearing Housings and Mounted Units — HFB Wälzlager / HFB Bearings
Selection of SDI and SNI split plummer blocks, SLG and BTL conveyor housings, PDNI and GOS block housings, Ø 12–140 mm mounted units, spherical roller bearings, and couplings from HFB Wälzlager / HFB Bearings.
Split Plummer Block Housings SDI, SD, SNI and SSNI 5
SDI split plummer block housings succeed the proven SD line for heavily loaded industrial bearings. Spheroidal ductile iron supports operation down to -40 °C with DIN impact energy verified to -20 °C. The line covers SNI, reinforced SSNI 5, and S 30..K with replaceable seals.
- Series: SDI, SD, SNI, SSNI 5, S 30..K
- Ductile iron rated down to -40 °C
- Alignment marks and sensor mount pads
- Spares: seals, top caps, adapter sleeves
Unsplit Conveyor and Take-Up Housings SLG, STL and BTL
Unsplit plummer block and take-up housings from HFB Wälzlager / HFB Bearings handle belt tension and heavy drum loads on small and large conveyor lines. The range spans SLG take-up housings, STL drum units, and BTL plummer blocks with service bearings.
- Series: SLG, STL, BTL unsplit bodies
- Scope: small and heavy conveyor systems
- Duty: drum support and belt take-up stations
- Spares: bearing inserts, sleeves, seals
Block Housings PDNI, GOS, GOF and DIN 115 / EK Couplings
For oil-lubricated drives and industrial fans, HFB produces BL, PDNI, and ZLGO block housings plus GOS 2/3/5/6, GOF 2/5, GUF 2/5, and SBL plummer blocks. The lineup includes ZLF double-flange bearings, DIN 502–506 housings, and DIN 115 / EK couplings.
- Blocks: PDNI, BL, ZLGO, ZLF 200 / 30-45 / ZLFB
- Plummer blocks: GOS 2/3/5/6, GOF 2/5, GUF 2/5
- DIN housings: DIN 502, 503, 504, 505 L, 506 A
- Couplings: DIN 115 clamp and EK elastic
Metric Mounted Bearing Units for Shafts Ø 12–140 mm
Maintenance-free HFB mounted bearing units serve metric shafts from Ø 12 to 140 mm across FI, FIK, FIS, FIU, FUH, FUU, FIZ, SI, SIG, SKI, TI, OI, RIZ, UCP, UCFC, UCFL, UKP, HCP, SAP, and SBP series. Replaceable inserts cover UC, UC-SS, HC, SA, SB, and UK.
- Shaft range: metric Ø 12–140 mm
- Units: FI, SI, TI, OI, RIZ, UCP, UCFC, UCFL, UKP
- Inserts: UC, UC-SS, HC, SA, SB, UK mounting
- Protection: C-, CM-, and SM-DK end-cap series
Flanged and Carriage Bearing Housings FIZ, 7225, TN 2 and TVN
Specialized flanged and transport housings from HFB Wälzlager comprise 7225(00), FIZ...K, and I-1200(00) flanged units, TN 2 plummer blocks, TVN and TVL conveyor carriage housings, and wheelset bearings (Radsatzlager) built for straightforward maintenance.
- Flanged housings: 7225(00), FIZ...K, I-1200(00)
- Carriage & block units: TN 2, TVN, TVL
- Axle solutions: Radsatzlager wheelset bearings
- Spares: replaceable bearings, seals, covers
Spherical and Split Spherical Roller Bearings
HFB spherical roller bearings feature pressed steel (C, CC) or solid brass (M, MB, CA) cages with cylindrical or tapered bores (1:12 K, and 1:30 K30 on 240/241 series). Split spherical roller bearings fit shafts up to H9 tolerance and feature 3 outer-ring lube holes.
- Tapered bores: 1:12 (K) and 1:30 (K30 on 240/241)
- Cages: sheet steel (C, CC) or brass (M, MB, CA)
- Split line: shaft fit up to H9, metric & inch
- Lube: outer-ring groove with 3 lube holes
Vibration-Damped Insert Bearing Units VABR-B
Designed for noise-sensitive equipment, VABR-B units combine an SAN insert bearing jacketed in a rubber insulating ring with special noise-damping grease. Eccentric locking collar mounting simplifies installation and insert replacement in HVAC and fan drives.
- Design: SAN insert in rubber insulating jacket
- Locking: fast eccentric collar mounting
- Grease: specialized noise-damping lubricant
- Use: low-noise fans and air-handling systems
SSP and CORROPROOF Coatings plus Agricultural Bearing Units
SSP (Stainless-Steel-Protection) and CORROPROOF anti-corrosion coatings protect HFB housings and bearings against weather and corrosive washdown as a cost-effective alternative to solid stainless steel. Dedicated agricultural units resist dust, mud, and shock.
- SSP: high-efficiency stainless-steel coating
- CORROPROOF: economical anti-corrosion protection
- Agri line: sealed against dust, moisture, shock
- Fit: drop-in replacement without rework
Industrial Applications and Housing Selection for HFB Wälzlager / HFB Bearings
Founded in June 1996 in Buchen, Germany, HFB Wälzlager-Gehäusetechnik GmbH manufactures split plummer block housings (SDI, SD, SNI, SSNI 5, S 30..K), unsplit conveyor take-up and drum housings (SLG, STL, BTL), and oil- or grease-lubricated block housings (PDNI, BL, ZLGO, GOS 2/3/5/6, GOF 2/5, GUF 2/5, ZLF).
SDI housings cast in spheroidal ductile iron operate down to -40 °C with DIN notched-bar impact energy verified down to -20 °C, incorporating alignment marks and mounting bosses for vibration and temperature sensors.
Mounted Units, Spherical Bearings and SSP / CORROPROOF Protection
Metric maintenance-free bearing units serve shaft diameters Ø 12–140 mm (FI, SI, TI, OI, RIZ, UCP, UCFC, UCFL, UKP) with UC, UC-SS, HC, SA, SB, and UK inserts.
Spherical roller bearings come with steel (C, CC) or brass (M, MB, CA) cages and 1:12 (K) or 1:30 (K30 for 240/241) tapered bores, while split roller bearings fit H9 shafts.
VABR-B units isolate vibration via a rubber-jacketed SAN insert and noise-damping grease, while SSP (Stainless-Steel-Protection) and CORROPROOF coatings shield against harsh climates and corrosion.
Couplings, Flanged Series and RFQ Parameters
The Buchen site stocks more than 8,500 drive-technology components including DIN 115 clamp couplings, EK elastic couplings, DIN 502–506 housings, FIZ...K, 7225(00), I-1200(00) flanged housings, TN 2, TVN, TVL carriage units, and Radsatzlager wheelset bearings.
Specify the housing series, shaft diameter and tolerance, lubrication mode (grease or oil), seal type, and coating option when requesting an export quotation.
HFB Wälzlager / HFB Bearings and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of HFB Wälzlager / HFB Bearings and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ZEN Group / ZEN Bearings
- Equipment and parts for NSK
- Equipment and parts for Flender
- Equipment and parts for HEYNAU / Heynau Gears Production
Documents and sources
- About HFB Wälzlager-Gehäusetechnik GmbH — company history since 1996 and product scope
- Buchen manufacturing site — over 5,000 m² facility, more than 8,500 items, 75 employees
- SDI split plummer block housings — ductile iron rated down to -40 °C and sensor mount options
- Maintenance-free metric mounted bearing units for shafts Ø 12–140 mm — series directory
- Unsplit plummer block and take-up housings SLG, STL, BTL for conveyor systems
- Block housings and oil-lubricated plummer blocks PDNI, GOS, GOF, ZLF and DIN 115 / EK couplings
- Plummer block housings SD, S 30..K, SNI and SSNI 5 with multiple sealing options
- Flanged and carriage housings 7225(00), FIZ...K, I-1200(00), TN 2, TVN, TVL and wheelset bearings
- Self-aligning ball and spherical roller bearings (1:12 and 1:30 tapered bores, steel/brass cages)
- Split spherical roller bearings — fast replacement on shafts up to H9 tolerance
- VABR-B radial insert ball bearings with SAN insert and rubber damping ring
- CORROPROOF special anti-corrosion coating and SSP stainless-steel protection
- Bearing housings and mounted units for agricultural machinery
