Renata / Renata Batteries Industrial Coin Cells, Tabbed Cells, and Holders
Sourcing Swiss-made Renata (Renata Batteries / Renata SA) 3 V lithium CR coin cells, PCB-tabbed FH/FV/SM footprints, SMTU/HU holders, ICR/ICP rechargeables, and 1.55 V silver oxide batteries.
3 V Primary Lithium Coin Cells (CR Series)
Renata 3 V Li/MnO2 primary coin cells span CR1025 (30 mAh) through CR2477N (950 mAh) with less than 1% annual self-discharge and shelf life up to 10 years at 23 °C. MFR and .MFR variants deliver low internal resistance under pulse loading for CNC, PLC, and IoT memory.
- 3 V Li/MnO2, 25–950 mAh capacity
- Operating range -40 to +85 °C (MFR: -30 to +85 °C)
- Self-discharge < 1% per year at 23 °C
- UL-1642 listing (MH 14002), 18 standard sizes
Tabbed Lithium Coin Cells for PCB Mounting
With nearly 1,000 tabbed coin cell variants in FV, VF, SM, FH, HF, AH, RH, HR, and RV footprints, Renata provides tinned PCB contacts for through-hole, SMD, and cable mounting. Factory spot-welded tabs eliminate direct soldering heat on the cell housing.
- 2-tab footprints: FV, VF, FH, HF, SM (SMD)
- 3-tab & Isotan: RH, HR, RV, AH variants
- Tinned contacts for pin-in-hole and reflow
- Capacities 25–950 mAh, weights 0.8–8.5 g
SMT and Through-Hole Coin Cell Holders
Renata SMTU, SMTM, SM2X, HU, VBH, NH, and NL battery holders support horizontal and vertical SMT or through-hole assembly with tape-and-reel packaging. Low contact resistance and reflow-compatible housings allow fast field cell replacement on industrial boards.
- SMT series: SMTU, SMTM low-profile, SM2X, -C clip
- Through-hole: HU, VBH2032-1, NH5077, NL5077
- Reflow soldering and pick-and-place ready
- Fits CR1220–CR2477N and 357 coin cells
Rechargeable Lithium Coin Cells (ICR Series)
Renata ICR rechargeable button cells (ICR1040 B1 to ICR1454 B1) feature hermetic glass-to-metal sealing that prevents electrolyte leakage and swelling. Rated for 4.2–4.5 V systems, they support fast charging up to 4.0C and deliver over 1,000 cycles.
- Capacities 33–104 mAh (10.2–14.2 mm diameter)
- Hermetic glass-to-metal seal without swelling
- Fast charging up to 4.0C, 4.2–4.5 V system
- Cycle life > 1,000, self-discharge < 2%/month
Lithium Polymer Batteries (ICP Series)
Renata ICP prismatic Li-Ion polymer cells cover capacities from 35 to 2,800 mAh at 3.7–3.8 V rated voltage and 4.2–4.35 V charge voltage. Most ICP models integrate an internal safety protection circuit and meet UN38.3 and IEC 62133 requirements.
- ICP series: 35–2,800 mAh prismatic pouch
- 3.7–3.8 V nominal, 4.2–4.35 V charge voltage
- Operating range -20 to +60 °C, 500 cycles (80%)
- Integrated protection circuit, UN38.3 tested
1.55 V Mercury-Free Silver Oxide Coin Cells
Renata produces over 40 mercury-free 1.55 V silver oxide coin cells in Low Drain and High Drain grades, spanning 6 to 190 mAh capacity. Tight dimensional tolerances from 4.8 x 1.6 mm (337) to 11.6 x 5.4 mm (357) serve instrumentation, watches, and telemetry.
- 1.55 V Ag2O chemistry, 100% mercury-free
- Over 40 Low Drain and High Drain models
- Capacities 6–190 mAh, 20–300 uA load
- Shelf life up to 3 years, -20 to +60 °C
High-Pulse Silver Oxide Coin Cells
Renata High-Pulse (Improved High Drain) silver oxide cells sustain current pulses of 10 mA and above for wireless sensors, smart metering, and compact medical devices. Ultra-compact formats start at 4.8 mm diameter by 1.25 mm height.
- Pulse current capability >= 10 mA
- Compact formats from 4.8 x 1.25 mm
- Optimized low impedance under pulse load
- Parallel multi-cell and tabbed builds
On-Demand Custom Assemblies and Cabling
Renata On-Demand engineering has delivered more than 900 custom battery configurations, including bespoke PCB tabs, wire harnesses, connectors, and multi-cell parallel packs. The portfolio also includes 1.45 V mercury-free zinc-air cells (10, 13, 312, 675).
- Over 900 custom-engineered solutions
- Custom tabs, wire leads, and connectors
- Multi-cell parallel assemblies and protection
- 1.45 V zinc-air series: No. 10, 13, 312, 675
Swiss Manufacturing Heritage and 3 V CR Lithium Cells
Founded in 1952 and headquartered in Itingen near Basel, Switzerland, Renata SA has been a wholly owned subsidiary of Swatch Group since 1982.
Its primary 3 V Li/MnO2 coin cell portfolio spans 18 sizes from CR1025 (30 mAh) to CR2477N (950 mAh), including pulse-optimized MFR and .MFR grades with UL-1642 recognition (File MH 14002).
With annual self-discharge below 1% at 23 °C, up to 10-year shelf life, and operating temperatures down to -40 °C (standard CR) or -30 °C (MFR), Renata cells power industrial PLCs, CNC memory backup, smart meters, and IoT nodes.
PCB Tab Configurations and SMT/Through-Hole Holders
Renata manufactures nearly 1,000 tabbed coin cell variants with factory spot-welded tinned terminals: 2-tab horizontal (FH, HF), 2-tab vertical (FV, VF), 3-tab vibration-resistant (RH, HR, RV), Isotan tabs (AH), and SMD tabs (SM), plus custom cable and connector assemblies.
Where field replacement without soldering is required, Renata supplies LCP and metal battery holders (SMTU, SMTM, SM2X, -C clip series for automated pick-and-place reflow, and HU, VBH2032-1, NH5077, NL5077 for through-hole mounting).
Rechargeable ICR/ICP Cells, Silver Oxide 1.55 V, and On-Demand Engineering
For rechargeable designs, the ICR coin cell line features hermetic glass-to-metal sealing, 4.2–4.5 V operation, fast charging up to 4.0C, and over 1,000 cycles, while prismatic ICP Li-Ion polymer cells cover 35–2,800 mAh with integrated protection circuits and UN38.3 testing.
The 100% mercury-free 1.55 V silver oxide assortment comprises over 40 Low Drain, High Drain, and High-Pulse (>10 mA) models starting at 4.8 x 1.25 mm, supported by more than 900 custom On-Demand battery solutions and UN38.3 / ASDS transport documentation.
Renata and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Renata and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for MPD / Memory Protection Devices
- Equipment and parts for GCT / Global Connector Technology
- Equipment and parts for PRECI-DIP
- Equipment and parts for Ametherm
- Equipment and parts for Attend / ATTEND Technology
Documents and sources
- Renata SA — About the company (Itingen, Switzerland)
- Renata SA — Company history milestones (since 1952)
- Renata — 3 V primary lithium coin cells (CR series)
- Renata — Industrial products brochure (PDF)
- Renata — Tabbed lithium coin cells for PCB mounting
- Renata — SMT and through-hole coin cell battery holders
- Renata — Rechargeable lithium coin cells (ICR series)
- Renata — Lithium polymer batteries (ICP series)
- Renata — 1.55 V mercury-free silver oxide coin cells
- Renata — High-pulse silver oxide batteries (>10 mA)
- Renata — On-Demand custom battery solutions
- Renata — Industrial applications and sectors
