Sylincom (Beijing Sylincom Technology) Terminals, Modules & RF Testers

Sylincom wireless and satellite hardware: DX-S/DX-T chips, SVB01/02C, M1310, M2210, SLM600V20 modules, SBOX01C, STBOX01C, DRC05-3 terminals, and JY3000/JY3100 comprehensive testers.

Satellite Baseband ICs DX-S701 & DX-S702

DX-S701 is a Tiantong-1 baseband IC in a 7.0 x 7.0 x 0.77 mm LFBGA package with a DX-M DSP core and ASIC FEC decoder. DX-S702 integrates an RF transceiver and multi-core soft baseband (7.0 x 7.0 x 0.75 mm) for GEO/LEO terminals. Both operate at -40 to +85 °C.

  • DX-S701: LFBGA 7.0 x 7.0 x 0.77 mm, TT-1 protocol
  • DX-S702: 7.0 x 7.0 x 0.75 mm GEO/LEO RF-baseband IC
  • Interfaces: UART 16550, SIM/USIM, IIS/PCM, IIC, SPI
  • Operating temperature range: -40 to +85 °C

Real-Time Processor DX-T502 & SparkLink SoC DX-T600

DX-T502 combines 4 RISC-V cores and 3 vector DSPs with LPDDR4x, PCIe 3.0, RGMII Gigabit Ethernet, 32 GPIO, and 4 PWM outputs up to 10 MHz. DX-T600 is a SparkLink SLB V1.0 SoC in a 13 x 13 x 1 mm FCCSP package with microsecond latency and 99.999% link reliability.

  • DX-T502: 4-core RISC-V + 3 vector DSPs, Linux environment
  • DX-T502 motion I/O: PCIe 3.0, RGMII 1G, 4x PWM 10 MHz, 32 GPIO
  • DX-T600: SparkLink SLB V1.0, FCCSP 13 x 13 x 1 mm
  • DX-T600 buses: PCIe, USB, UART, SPI, IIC, JTAG, SPMI

S-Band Satellite Module SVB01/02C

SVB01/02C is an S-band Tiantong CP satellite module built around the DX-S701 baseband chip in an LCC/LGA package measuring 30.5 x 28 x 2.9 mm. It integrates power, RF, and clock circuits with 2170-2200 MHz Rx sensitivity up to -124 dBm and 1980-2010 MHz Tx power above 33 dBm at 3.7-4.2 V.

  • Rx band: 2170-2200 MHz, reference sensitivity <= -124 dBm
  • Tx band: 1980-2010 MHz, max output power >= 33 dBm
  • Package: LCC/LGA 30.5 x 28 x 2.9 mm, supply 3.7-4.2 V (typ. 4 V)
  • Operating temp: -40 to +85 °C, SIM/USIM, IIS/PCM, UART, IIC

Dual-Mode & LEO Modules M1310 and M2210

Based on DX-S702, the M1310 module (48.99 x 37.5 x 3.7 mm, BTB) supports LEO narrowband and TT dual-mode single-standby operation. The M2210 module (40 x 38 x 3.5 mm, BTB) provides full-duplex Tx/Rx antenna ports. Both include eSIM, external auth support, and OTA updates.

  • M1310: 48.99 x 37.5 x 3.7 mm, BTB, LEO + TT dual-mode
  • M2210: 40 x 38 x 3.5 mm, BTB, full-duplex LEO data link
  • Supply: 3.4-4.35 V (typ. 4 V), operating temp -40 to +85 °C
  • Interfaces: UART, I2S, PCM, SIM/eSIM, SDMMC, self-diagnostics

Satellite Communication Terminals SBOX01C & STBOX01C

SBOX01C is an IP68 portable Tiantong terminal (83 x 83 x 33 mm) with a magnetic base, internal antenna, SOS button, and Bluetooth for around 8 h of talk time. STBOX01C is a 9-36 V vehicle terminal (150 x 81 x 30 mm, IP50) switching 4G/Tiantong over CAN, RS485, and GNSS.

  • SBOX01C: IP68, 83 x 83 x 33 mm, ~8 h talk time, < 0.02 A idle
  • STBOX01C: Tiantong / 4G dual-mode, 9-36 V DC (< 500 mA @ 12 V)
  • STBOX01C I/O: Bluetooth, CAN bus, RS485, Beidou + GPS, IP50
  • Operating temp: -40 to +85 °C (voice, SMS, fax, IoT data)

SparkLink Terminal SLD600V10 & Controller DRC05-3

SLD600V10 (65 x 60 x 20 mm) is a 5 GHz SparkLink SLB 1.0 terminal built on DX-T600 with a USB 2.0 port rated for -40 to +85 °C. DRC05-3 is an IP65 remote controller (106 x 97.3 x 29 mm, 9-36 V DC) featuring 4G, 2.5 m Beidou+GPS accuracy, CAN J1939, and OTA diagnostics.

  • SLD600V10: DX-T600 platform, 5 GHz SLB 1.0, USB 2.0, 65x60x20 mm
  • DRC05-3 GNSS: Beidou+GPS 2.5 m accuracy, -165 dBm tracking
  • DRC05-3 hardware: 9-36 V DC, IP65 enclosure, 106x97.3x29 mm
  • DRC05-3 telemetry: 4G uplink, CAN J1939 bus, OTA diagnostics

Satellite Terminal Comprehensive Testers JY3000 & JY3100

JY3000 is an R&D comprehensive tester for Tiantong terminals combining system simulation, signal generation, and analysis for RF, protocol, and security checks. JY3100 is a production tester automating power calibration, frequency alignment, and verification under remote control.

  • JY3000: Tiantong band coverage, low Tx / high Rx RF dynamic range
  • JY3000 modes: fading channel simulation, auth & encryption testing
  • JY3100: standalone Tx/Rx debugging with high-precision RF algorithms
  • JY3100 line integration: remote interface for automated factory software

Sylincom Core Silicon & Wireless Architecture

Beijing Sylincom Technology Co., Ltd. develops proprietary DX-M DSP cores, real-time multi-core RISC-V/DSP processors, and integrated RF-baseband SoCs supporting Tiantong-1 GEO satellites, LEO narrowband constellations, and 5 GHz SparkLink SLB V1.0 wireless links.

The product ecosystem spans discrete chips (DX-S701, DX-S702, DX-T502, DX-T600), embedded modules (SVB01/02C, M1310, M2210, SLM600V20), field terminals (SBOX01C, STBOX01C, SLD600V10, DRC05-3), and JY3000/JY3100 comprehensive test instruments.

Industrial Interfaces & Electrical Integration

Vehicle and machinery terminals STBOX01C and DRC05-3 operate across 9-36 V DC power rails and integrate over CAN J1939, RS485, and Bluetooth with Beidou and GPS dual-mode positioning.

Embedded modules use standardized LCC/LGA (SVB01/02C), BTB (M1310, M2210), and Mini-PCIe (SLM600V20) footprints rated for -40 to +85 °C, exposing UART, I2S, PCM, SIM/eSIM, USB 2.0, and PCIe buses.

Sylincom and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Sylincom and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.