CISSOID SiC Inverters and Power Modules

Sourcing CISSOID Pulse motor control inverters, 1200 V SiC ICM and IPM stacks, gate driver boards, and IGBT modules by specification.

Pulse SiC Motor Control Inverters

The CISSOID Pulse family (Mini S95, Compact S250, Ultra S400) delivers 95–400 kW continuous power across a 50–850 V DC bus. Built on 1200 V SiC stages, it integrates liquid cooling, EMI filtering, and CAN control. Complete inverters and power assemblies are sourced by part code.

  • DC bus: 50–850 V
  • Power: 95–400 kW (500 kW peak)
  • Current: 115–400 A RMS
  • Models: S95, S250, S400

SiC Inverter Control Modules (ICM)

CISSOID ICM stacks (CXT-ICM3SA12340A, CXT-ICM3SA12450A, CXT-ICM3SA12550A, CMT-ICM3SB12340A) combine a 3-phase 1200 V / 340–550 A SiC stage, gate driver board, and real-time controller. Modules meet AQG-324 and ISO 26262 ASIL-C Ready. Complete ICM stacks and boards are sourced by code.

  • Rating: 1200 V / 340–550 A
  • Baseplate: Pin-Fin or flat AlSiC
  • Standards: AQG-324, ISO 26262
  • Models: CXT-ICM3SA, CMT-ICM3SB

SiC Intelligent Power Modules (IPM)

CISSOID 3-phase 1200 V / 340–550 A SiC IPMs (CXT-PLA3SA12340A, CXT-PLA3SA12450A, CXT-PLA3SA12550A, CMT-PLA3SB12340A) integrate HADES2 gate drivers. Built-in DESAT, UVLO, AMC, and SSD protections support junction operation up to +175 °C. Power modules are matched by current and baseplate.

  • Rating: 1200 V / 340–550 A
  • Driver chipset: HADES2
  • Max Tj: +175 °C
  • Models: CXT-PLA3SA, CMT-PLA3SB

SiC Inverter Reference Designs EVK-PLA

The EVK-PLA1060A on-board series supports up to 900 V DC bus and 463 kW output (69 kW/L 60s peak), while EVK-PLA1050B covers 650/800 V at 275/400 A. Each kit combines an ICM stack with DC-link capacitor, EMI filter, and current sensors. Complete kits and subassemblies are supplied to order.

  • Bus voltage: 650–900 V DC
  • Output: up to 463 kW (69 kW/L)
  • Series: EVK-PLA1050B, EVK-PLA1060A
  • Modules: ICM, DC-link, EMI, sensors

SiC Gate Driver Boards & HADES2 ICs

CISSOID CMT gate driver boards (-55 to +125 °C) include CMT-TIT0697 (1200 V for XM3), CMT-TIT8243 (1200 V for 62 mm), and CMT-TIT8244 (1700 V for 62 mm modules). High-temperature primary/secondary ICs CMT-HADES2P and CMT-HADES2S operate from -55 to +175 °C. Boards and ICs are matched by part number.

  • Isolation: 1200 V and 1700 V
  • Boards: -55 °C to +125 °C
  • HADES2 ICs: -55 °C to +175 °C
  • Footprints: XM3 and 62 mm

IGBT Power Modules & Discretes

CISSOID Trench Gate Field Stop modules cover 3-phase CXT-PLA3BG07820R (750 V / 820 A, copper pinfin, AQG-324) and 1200 V / 300 A half-bridges CMT-PLA1BL12300MA and CMT-PLA1BK12300MA. The range also includes 1200 V / 10–50 A modules and 650 V / 75 A discrete CMT-PLA0BN06075L in TO-247-3L.

  • Packages: CPAK-HPC/EDC/62/E2B, TO-247-3L
  • Ratings: 650–1200 V, 10–820 A
  • Technology: Trench Gate Field Stop
  • Junction temp: -40 °C to +175 °C

High-Temperature Semiconductors CHT/CMT/CXT

CISSOID extreme-temperature families span CHT (-55 to +225 °C, 5-year rating), CMT (-55 to +175 °C), and CXT (-40 to +175 °C, 15-year rating), covering ADCs, op-amps, PWM controllers, and 28 V / 1 A regulators. Legacy HT parts are marked obsolete; units are matched by code.

  • CHT family: -55 °C to +225 °C
  • CMT / CXT: up to +175 °C
  • Regulators: up to 35 Vin / 28 V 1 A
  • Functions: ADC, OpAmp, PWM, logic

Motor Control Software & Cooling Accessories

CISSOID ICM controllers run Motor Control APP on multi-core ARM Cortex-R5F processors (ISO 26262 ASIL-D) with FOC and dead-time compensation. Matching power accessories include low-ESL (<8 nH), low-ESR DC-link capacitors plus ACC-PLA1008D and ACC-PLA1077A liquid cooler kits.

  • Controller: ARM Cortex-R5F, ASIL-D
  • Control: FOC, dead-time compensation
  • DC-link cap: ESL < 8 nH, low ESR
  • Coolers: ACC-PLA1008D, ACC-PLA1077A

CISSOID SiC Inverter & Control Module Architecture

Founded in 2000 as a spin-off from the University of Louvain-la-Neuve in Belgium, CISSOID builds Pulse SiC motor control inverters (95–400 kW on a 50–850 V DC bus), 1200 V / 340–550 A ICM stacks, and EVK-PLA1050B / EVK-PLA1060A reference platforms.

The modular ICM stack pairs a 3-phase SiC MOSFET stage with a HADES2 gate driver board (DESAT, UVLO, AMC, SSD protections) and an ARM Cortex-R5F control board running Motor Control APP software, qualified to AQG-324 and compliant with ISO 26262 ASIL-C/D.

Gate Drivers, IGBT Modules & Cooling Subsystems

For industrial and traction converters using standard XM3 and 62 mm packages, CISSOID provides CMT-TIT0697 (1200 V), CMT-TIT8243 (1200 V), and CMT-TIT8244 (1700 V) driver boards alongside Trench Gate Field Stop IGBT modules rated up to 750 V / 820 A and 1200 V / 300 A.

Low-ESL (<8 nH) DC-link capacitors and ACC-PLA1008D / ACC-PLA1077A liquid cooler kits complete the power assembly. Legacy CHT/CMT/CXT high-temperature ICs rated up to +225 °C are marked obsolete by the factory and verified by exact part code.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.