Zhejiang Wuma Drive / Wuma Drive Industrial Gearboxes & Reducers
Engineering selection and export of Zhejiang Wuma Drive / Wuma Drive worm (WMRV, WMSS), helical (WR, WK, WF, WS), hypoid (WKM), planetary, heavy-duty (WH, WB) gearboxes and MB/MBN speed variators.
WMRV, WMVF & WDVF Worm Gearboxes
The WMRV worm gearbox line spans 11 frame sizes (WMRV 25–185) with ratios 5–100, rated power 0.06–22 kW, and output torque up to 2570 N·m. Frames 25–90 use aluminum housings and 110–185 use iron for B3–V6 mounting. Carburized 20Cr worms, bronze wheels, and seals are replaceable.
- WMRV 25–185, ratio 5–100
- Power 0.06–22 kW, torque to 2570 N·m
- Self-locking at i >= 60
- WMVF / WDVF 30, 44, 49
WMSS Stainless Steel Worm Gearboxes
WMSS 30, 40, 50, and 63 worm reducers serve food, pharmaceutical, and chemical lines exposed to high-pressure washdowns. Housings and output hubs use 304 stainless steel paired with tin bronze wheels. Replaceable Viton seals, synthetic oil, and IEC or NEMA flanges keep units sealed.
- Frame sizes WMSS 30, 40, 50, 63
- 304 stainless housing and output hub
- IP65 and IP69K with Viton seals
- Ratios 7.5 to 100, IEC or NEMA
WR Inline Helical Gearboxes
WR17–WR167 coaxial inline helical reducers cover 1-, 2-, and 3-stage reductions from 3.41 to 289.74, 0.12 to 160 kW, and 45 to 18,000 N·m. Low-carbon alloy steel gears are carburized, quenched, and ground for quiet operation. Replacement gear sets, φ20–φ120 mm shafts, and seals fit M1–M6 mounts.
- 13 frame sizes WR17–WR167
- Input 0.12–160 kW, torque to 18,000 N·m
- Output shaft or bore φ20–φ120 mm
- M1–M6 mounts, flanges φ120–φ660 mm
WK Helical Bevel Gearboxes
WK37–WK187 right-angle reducers combine three-stage helical-bevel-helical gearing with ratios 2.4–197.37, 0.12–200 kW, and torque up to 50,000 N·m. High-rigidity iron housings support foot, flange, and shaft mounts (M1–M6). Bevel-helical gear sets, φ25–φ190 mm shafts, and bearings are serviceable.
- 12 frame sizes WK37–WK187
- Torque 125–50,000 N·m, 0.12–200 kW
- Ratio range 2.4 to 197.37
- Shaft or bore φ25–φ190 mm, M1–M6
WF Parallel & WS Helical-Worm Units
WF37–WF157 parallel-shaft reducers reach 200 kW and 18,000 N·m, while WS37–WS97 two-stage helical-worm units deliver up to 4,000 N·m at 90°. Housings use HT250 iron with 20CrMnTi DIN 6 gears and CuSn12Ni2 bronze worm wheels. Gear clusters, bronze rims, seals, and IEC B5/B14 adapters are replaceable.
- WF37–WF157: 0.12–200 kW, to 18,000 N·m
- WS37–WS97: 0.12–22 kW, to 4,000 N·m
- 20CrMnTi DIN 6 gears, CuSn12Ni2 bronze
- HT250 housings, IEC B5 / B14 mounts
WKM Hypoid & MR Modular Gearboxes
WKM50–WKM90 hypoid gearboxes share WMRV mounting dimensions while delivering 90%–94% efficiency, SKF oil seals, and double the service life of standard worm units. MR37–MR107 modular helical units cover 112–4,300 N·m for fast gear swaps. Servo/NEMA flanges fit both.
- WKM 50–90: 90–94% eff., ratio 7.5–300
- SKF oil seals and CKD VG 320 gear oil
- MR 37–107: 112–4,300 N·m, φ25–φ70 mm
- WMRV drop-in footprint, Servo/NEMA
Planetary, MB/MBN Variators & PC Stages
Helical planetary reducers keep <5 arcmin (1-stage) and <15 arcmin (2-stage) backlash under 70 dB with alloy steel gears. MB/MBN cone-disk variators span a ratio range of 5 (1:1.45 to 1:7.25). PC063–PC090 helical pre-stages (i = 3.0 / 2.42) bolt to WMRV B14.
- Backlash <5 / <15 arcmin, noise <70 dB
- MB/MBN variators: 1:1.45 to 1:7.25
- PC063–080 (i = 3.0) and PC090 (i = 2.42)
- Through-hardened gears, B14 motor fit
WH & WB Heavy-Duty Industrial Gearboxes
WH (H) heavy-duty helical and WB helical-bevel gear reducers handle extreme continuous loads with low noise and high torque. Both series serve mining, steel, cement, and energy lines with multi-position housings. Replacement gear sets, shafts, bearings, and seals fit both.
- WH (H) heavy-duty helical gearboxes
- WB heavy-duty helical-bevel series
- Mining, steel, cement, energy duty
- Serviceable layouts for lower downtime
Selecting Zhejiang Wuma Drive / Wuma Drive Gear Architecture
Selection starts with duty cycle, shaft orientation, and efficiency targets: WMRV 25–185 worm gearboxes offer compact right-angle layouts and mechanical self-locking at i >= 60, whereas WR, WK, WF, and WKM hypoid units sustain 90%–98% efficiency for continuous-duty lines.
Washdown food and pharmaceutical lines require WMSS 30–63 housings in 304 stainless steel (IP65/IP69K, Viton seals), while MB/MBN variators and PC063–PC090 pre-stages expand speed-control ratios.
Mounting Interfaces, Flanges & Heavy-Duty Sizing
Specify mounting orientation (B3–B8, V5–V6 for WMRV/WKM or M1–M6 for WR/WK/WF/WS), hollow or solid output shafts, input flange standard (IEC B5/B14, Servo square, or NEMA), and shock service factor.
For continuous high-torque mining, steel, cement, and energy lines, WH helical and WB helical-bevel industrial gearboxes provide rigid multi-position housings.
Zhejiang Wuma Drive / Wuma Drive and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Zhejiang Wuma Drive / Wuma Drive and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Zhejiang Wellnit Mechanical / Wellnit
- Equipment and parts for FPT Industrie
- Equipment and parts for Hamacher Maschinenbau
- Equipment and parts for Movacolor
Documents and sources
- Wuma Drive — official manufacturer home (WMRV, WR, WK, WF, WS)
- About Zhejiang Wuma Drive Co., Ltd. (since 1995, 60,000 m² plant)
- Wuma Drive OEM/ODM & gearbox technical services
- Wuma Drive gearbox selection catalogues (Download)
- WMRV 25–185 worm gearboxes — specifications and dimensions
- WMSS 30/40/50/63 stainless steel worm gearboxes (IP65/IP69K)
- WMVF 30/44/49 worm gearboxes (Z1 tooth profile)
- WDVF 30/44/49 aluminum-housing worm gearboxes
- WR17–WR167 inline helical gearboxes
- WK37–WK187 helical bevel gearboxes
- WF37–WF157 parallel shaft helical gearboxes
- WS37–WS97 helical worm gearboxes (20CrMnTi + CuSn12Ni2)
- WKM-B hypoid gearboxes (WKM 50–90, SKF seals, CKD VG 320)
- WKM-C hypoid gearboxes (2/3 stages, 90–94% efficiency)
- MR 37–107 modular inline helical gearboxes
- Wuma helical planetary gearboxes (<5 / <15 arcmin)
- MB & MBN planetary cone-disk speed variators
- PC063–PC090 single-stage pre-stage helical gearboxes
- WB series heavy-duty helical bevel industrial gearboxes
- WH (H) series heavy-duty helical industrial gearboxes
