Hamacher Maschinenbau Equipment & Parts

German precision special machinery by Hamacher Maschinenbau GmbH: PSW drum and PST CNC wire-laying machines for heated laminated glass, busbar soldering modules, degassing centrifuges, timing belt moulds, and replacement assemblies.

PSW Drum Wire-Laying Machines

PSW drum machines handle mid-to-high volume production of rectangular and trapezoid tungsten heating fields on vacuum-held PVB sheets. Patented pinwheel tooling forms wiggle wires down to 16 μm. Spare assemblies include laying heads, heated rollers, drum seals, and wire guides.

  • Drum: 1.1–2 m diameter, 2.2–4.95 m length
  • Tungsten wire down to 16 μm on PVB
  • Speed: up to 70 m/min rect. / 35 m/min trap.
  • Wiggle wave: up to 1.5 mm, pitch 0.5–5 mm

PST CNC Table Wire-Laying Machines

PST table machines handle low-to-medium volume runs and rapid product changeovers using free-contour CNC programming on vacuum tables up to 2 x 3 m. The 3-axis head curves after the busbar to leave no scrap wire. Replacement heads, drives, pinwheels, and heating rollers match OEM specs.

  • Vacuum table: up to 2 m width, 3 m length
  • Axes: 2 linear + 1 rotary CNC contour
  • Mean laying speed: approx. 10 m/min
  • Tungsten wire down to 16 μm, wiggle wave

Busbar Laying & Soldering Machines

Busbar machines bond the first tinned copper busbar at low heat and solder the second busbar after PSW wiring to join wires and foil. The CNC table accepts 1-head or 2-head setups up to 2 x 3 m. Spare parts include busbar guides, heating rollers, thermal sensors, and spool holders.

  • CNC table up to 2 x 3 m, 3-axis head
  • Busbar: tinned copper, 8 mm width tested
  • Speed: 1st ~10 m/min, 2nd solder ~5 m/min
  • 1-head or 2-head setups, ~10 min heat cycle

Industrial Degassing Centrifuges

Hamacher designs centrifuges for outgassing, deblistering, defoaming, and dehumidifying fluid materials. Units are built in varied sizes for continuous inline flow or sequential batch duty. Replacement rotors, dynamic seals, bearings, and couplings are matched by serial tag.

  • Process: outgassing, deblistering, defoaming
  • Media: all fluid industrial materials
  • Operation: continuous or sequential batch
  • Sizing: custom capacities and field-proven

Timing Belt Moulds & Toothed Rollers

Profile-ground timing belt moulds, toothed rollers, and fluted rollers deliver free-form tooth geometries without special tooling. Used for belt moulding, sheet fluting, and internal profiles. Replacement roller cores, bearing journals, sleeves, and flanges are built to print.

  • Roller diameter: Ø35 mm to Ø1600 mm
  • Profile length: up to 1200–1600 mm
  • Material: St52-3 steel or Al; chrome/nickel
  • Tolerance: ±0.01 mm/m, ±1.0 arcsec, Ra 3–5 μm

Grout Mills & Hotlineglass Systems

Hamacher builds guided masonry grout mills and pneumatic end or side cutters, plus custom electro-mechanical machines. Subsidiary Hotlineglass produces wired PVB and EVA heating and antenna foils at 14–20 μm. Spare air motors, cutters, rollers, and assemblies match by tag.

  • Grout mills: guided carriage & air motors
  • Hotlineglass foils: PVB/EVA, 14–20 μm wire
  • Heating output: 4–6 W/dm² at 12 V supply
  • Laminated glass transparency: over 95%

Selecting PSW Drum vs. PST CNC Wire-Laying Systems

PSW drum machines (1.1–2 m drum diameter, 2.2–4.95 m length) serve mid-to-high volume automotive glass lines producing rectangular fields at up to 70 m/min or trapezoid fields at up to 35 m/min with tungsten wire down to 16 μm.

PST CNC table machines (vacuum table up to 2 x 3 m, two linear and one rotary axes, ~10 m/min mean speed) target low-to-medium volume runs and rapid product changeovers with full free-contour programming and zero trailing scrap wire.

Busbar Modules, Centrifuges & Precision Belt Moulds

Busbar laying and soldering machines pair with PSW drum lines on a 2 x 3 m CNC table (tested with 8 mm tinned copper busbar): the first busbar is glued at ~10 m/min and the second soldered at ~5 m/min in 1-head or 2-head setups.

Hamacher centrifuges support continuous or sequential outgassing, deblistering, defoaming, and dehumidifying of fluids.

Profile-ground timing belt moulds and rollers (Ø35–1600 mm, St52-3 steel or aluminum, hard chrome or nickel finish) maintain ±0.01 mm/m diameter/profile tolerance and ±1.0 arcsec pitch accuracy.

Disambiguation & Hotlineglass Foil Integration

Hamacher Maschinenbau GmbH (Aachen, Germany, founded 1949, independent GmbH since 1994) is the specialist builder of these glass-wiring, centrifuge, milling, and belt-moulding systems, working closely with subsidiary Hotlineglass GmbH (founded 2005) on 14–20 μm wired PVB/EVA heating and antenna foils (>95% transparency, 4–6 W/dm² at 12 V).

Unrelated companies sharing the Hamacher surname (plotter service Hamacher Service GmbH, electric motor repair Hamacher GmbH, and door hardware Hamacher Beschläge) are excluded.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.